Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design

This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with dome lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device.

Fahrbare Abfall- und Wertstoffbehälter - Teil 3: Behälter mit 4 Rädern und einem Nennvolumen bis 1 300 l mit Schiebedeckel(n), für Schüttungen mit Zapfenaufnahme und/oder für Kammschüttungen - Maße und Formgebung

Die vorliegende Europäische Norm legt Maße und Anforderungen an die Formgebung von fahrbaren Abfall- und Wertstoffbehältern (im Folgenden kurz Behälter genannt) mit 4 Rädern, mit Schiebedeckel(n) und einem Nennvolumen bis 1 300 l für Schüttungen für Zapfenaufnahme und/oder Kammschüttungen fest.

Conteneurs roulants à ordures ménagères et recyclables - Partie 3: Conteneurs à 4 roues de capacité inférieure ou égale à 1300 l à couvercle(s) bombé(s), pour lève-conteneurs par tourillon et/ou à peigne - Dimensions et conception

La présente Norme européenne spécifie les dimensions et les exigences de conception pour les conteneurs à déchets roulants à quatre roues à couvercle(s) bombé(s) dont la capacité est inférieure ou égale à 1 300 l pour lève-conteneurs à tourillon et/ou à peigne.

Premični zabojniki za odpadke in za recikliranje - 3. del: Zabojniki na štirih kolesih s prostornino do 1300 l in izbočenim(-i) pokrovom(-i) za iztresalnike z rokama in/ali glavnikom - Mere in oblika

General Information

Status
Withdrawn
Public Enquiry End Date
24-Dec-2010
Publication Date
10-Feb-2014
Withdrawal Date
15-Apr-2020
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-Apr-2020
Due Date
09-May-2020
Completion Date
16-Apr-2020

RELATIONS

Buy Standard

Standard
SIST EN 840-3:2014
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fahrbare Abfall- und Wertstoffbehälter - Teil 3: Behälter mit 4 Rädern und einem Nennvolumen bis 1 300 l mit Schiebedeckel(n), für Schüttungen mit Zapfenaufnahme und/oder für Kammschüttungen - Maße und FormgebungConteneurs roulants à ordures ménagères et recyclables - Partie 3: Conteneurs à 4 roues de capacité inférieure ou égale à 1300 l à couvercle(s) bombé(s), pour lève-conteneurs par tourillon et/ou à peigne - Dimensions et conceptionMobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design13.030.40Naprave in oprema za odstranjevanje in obdelavo odpadkovInstallations and equipment for waste disposal and treatmentICS:Ta slovenski standard je istoveten z:EN 840-3:2012SIST EN 840-3:2014en,fr,de01-marec-2014SIST EN 840-3:2014SLOVENSKI

STANDARDSIST EN 840-3:20041DGRPHãþD
SIST EN 840-3:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 840-3
December 2012 ICS 13.030.40 Supersedes EN 840-3:2004English Version

Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design

Conteneurs roulants à ordures ménagères et recyclables - Partie 3 : Conteneurs à 4 roues de capacité jusqu' à 1 300 l à couvercle(s) bombé(s), pour lève-conteneurs par tourillon et/ou à peigne - Dimensions et conception

Fahrbare Abfall- und Wertstoffbehälter - Teil 3: Behälter mit 4 Rädern und einem Nennvolumen bis 1 300 l mit Schiebedeckel(n), für Schüttungen mit Zapfenaufnahme und/oder für Kammschüttungen - Maße und Formgebung This European Standard was approved by CEN on 22 September 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 840-3:2012: ESIST EN 840-3:2014

EN 840-3:2012 (E) 2 Contents Page Foreword ..............................................................................................................................................................31Scope ......................................................................................................................................................42Normative references ............................................................................................................................43Terms and definitions ...........................................................................................................................44Volumes ..................................................................................................................................................55Dimensions and design ........................................................................................................................56Nominal mass .........................................................................................................................................67Safety and health requirements ...........................................................................................................68Testing ....................................................................................................................................................69Marking ...................................................................................................................................................610Designation ............................................................................................................................................7Annex A (informative)

Recommendations for manufacturers of lifting devices ....................................... 16Annex B (informative)

A-Deviations ............................................................................................................... 18Bibliography ..................................................................................................................................................... 19 SIST EN 840-3:2014

EN 840-3:2012 (E) 3 Foreword This document (EN 840-3:2012) has been prepared by Technical Committee CEN/TC 183 “Waste management”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 840-3:2004. Technical changes since the latest edition:  The content has been adapted to the current state of the art and revised editorially.  Figure 3 has been deleted.  Frontal receivers Form B and C have been deleted. Figure 2 (now Figure 4) has been changed accordingly. This European Standard is one part of the series of standards of EN 840 with the main title Mobile waste and recycling containers comprising the following parts:  Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices — Dimensions and design;  Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices — Dimensions and design;  Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices — Dimensions and design (the present document);  Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices — Dimensions and design;  Part 5: Performance requirements and test methods;  Part 6: Safety and health requirements. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 840-3:2014

EN 840-3:2012 (E) 4 1 Scope This European Standard specifies dimensions and design requirements of mobile waste and recycling containers with 4 wheels, with dome lid(s) and capacity up to 1 300 l to be used by trunnion and/or comb lifting device. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 840-2:2012, Mobile waste and recycling containers — Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices — Dimensions and design EN 840-5, Mobile waste and recycling containers — Part 5: Performance requirements and test methods EN 840-6:2012, Mobile waste and recycling containers — Part 6: Safety and health requirements EN 1501-1, Refuse collection vehicles — General requirements and safety requirements — Part 1: Rear loaded refuse collection vehicles EN 1501-5:2011, Refuse collection vehicles — General requirements and safety requirements — Part 5: Lifting devices for refuse collection vehicles EN ISO 11469, Plastics — Generic identification and marking of plastics products (ISO 11469) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. NOTE Terms for components of mobile waste containers and lifting devices in three languages are given in Annex A of EN 840-1:2012. 3.1 mobile waste container appropriately designed container fitted with wheels intended to temporarily store waste

3.2 lifting device structure which picks-up, tilts and empties containers 3.3 comb lifting device lifting device in which the picking-up system consists of a row of teeth and a locking system to retain the container during emptying 3.4 trunnion lifting device lifting device in which the picking-up system consists of a pair of arms with automatic locking mechanism to fit the trunnion to retain the container during emptying 3.5 volume total space inside the container when the lid is closed

SIST EN 840-3:2014

EN 840-3:2012 (E) 5 3.6 nominal volume capacity volume stated by the manufacturer

Note 1 to entry: See Table 1 without tolerances. Note 2 to entry: The English term "capacity" and the French term "capacité" are translated in the German version by the term "Nennvolumen". 3.7 nominal mass mass, which is calculated as given in Clause 6 3.8 total permissible mass mass of the container plus the nominal load 3.9 functional and safety dimensions essential dimensions which ensure the functionality and interchangeability of the container with the compatible lifting device and which are necessary for the operator's safety and health 4 Volumes This part of EN 840 identifies the two classes of containers:  Class I - small size (nominal volume up to 1 000 l);  Class II - large size (nominal volume between 1 000 l and 1 300 l). Within the two above-mentioned classes of containers the following volumes are identified: 770 l, 1 000 l, 1 100 l and 1 300 l. Nominal volumes different from those referenced can be used by agreement between user and manufacturer. The tolerance of the volumes shall be ± 5 % maximum measured according to EN 840-5. 5 Dimensions and design 5.1 The design of the containers nee

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.