SIST EN ISO 28762:2012
(Main)Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010)
Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010)
ISO 28762:2008 specifies the requirements for the functional and aesthetic characteristics of vitreous and porcelain enamel coatings applied to plain steel for use as writing surfaces (whiteboards and chalkboards).
Emails und Emaillierungen - Email-Schichten auf Stahl für Schreibtafeln - Anforderungen (ISO 28762:2010)
Diese Internationale Norm legt Anforderungen an die funktionellen und ästhetischen Eigenschaften von Email-
Schichten auf ebenen Stahlblechen fest, die als Schreibtafeln (Weißwandtafeln und Schultafeln) verwendet
werden.
Émaux vitrifiés - Revêtements en émail appliqués sur l'acier de surfaces d'écriture - Spécification (ISO 28762:2010)
L'ISO 28762:2010 spécifie les exigences relatives aux caractéristiques fonctionnelles et esthétiques des revêtements en émail vitrifié appliqués sur de l'acier non allié, destinés à servir de surfaces d'écriture (tableaux blancs et noirs).
Steklasti in porcelanski emajli - Emajlne prevleke za jeklo, katerega površine so namenjene za pisanje - Specifikacija (ISO 28762:2010)
Ta mednarodni standard določa zahteve za funkcionalne in estetske značilnosti steklastih in porcelanskih emajlnih prevlek, nanesenih na navadno jeklo, ki se uporabljajo kot površine za pisanje (table iz plastičnih mas in navadne šolske table).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 28762:2012
01-januar-2012
1DGRPHãþD
SIST EN 14864:2005+A1:2007
Steklasti in porcelanski emajli - Emajlne prevleke za jeklo, katerega površine so
namenjene za pisanje - Specifikacija (ISO 28762:2010)
Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces -
Specification (ISO 28762:2010)
Emails und Emaillierungen - Email-Schichten auf Stahl für Schreibtafeln - Anforderungen
(ISO 28762:2010)
Émaux vitrifiés - Revêtements en émail appliqués sur l'acier de surfaces d'écriture -
Spécification (ISO 28762:2010)
Ta slovenski standard je istoveten z: EN ISO 28762:2010
ICS:
25.220.50 Emajlne prevleke Enamels
SIST EN ISO 28762:2012 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 28762:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 28762:2012
EUROPEAN STANDARD
EN ISO 28762
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 25.220.50 Supersedes EN 14864:2005+A1:2007
English Version
Vitreous and porcelain enamels - Enamel coatings applied to
steel for writing surfaces - Specification (ISO 28762:2010)
Émaux vitrifiés - Revêtements en émail appliqués sur Emails und Emaillierungen - Email-Schichten auf Stahl für
l'acier de surfaces d'écriture - Spécification (ISO Schreibtafeln - Anforderungen (ISO 28762:2010)
28762:2010)
This European Standard was approved by CEN on 14 November 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28762:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 28762:2012
EN ISO 28762:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 28762:2012
EN ISO 28762:2010 (E)
Foreword
This document (EN ISO 28762:2010) has been prepared by Technical Committee ISO/TC 107 "Metallic and
other inorganic coatings" in collaboration with Technical Committee CEN/TC 262 “Metallic and other inorganic
coatings” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14864:2005+A1:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 28762:2010 has been approved by CEN as a EN ISO 28762:2010 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 28762:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 28762:2012
INTERNATIONAL ISO
STANDARD 28762
Second edition
2010-11-15
Vitreous and porcelain enamels —
Enamel coatings applied to steel for
writing surfaces — Specification
Émaux vitrifiés — Revêtements en émail appliqués sur l'acier de
surfaces d'écriture — Spécification
Reference number
ISO 28762:2010(E)
©
ISO 2010
---------------------- Page: 7 ----------------------
SIST EN ISO 28762:2012
ISO 28762:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 28762:2012
ISO 28762:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 28762 was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings.
This second edition cancels and replaces the first edition (ISO 28762:2008), of which it constitutes a minor
revision.
© ISO 2010 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 28762:2012
---------------------- Page: 10 ----------------------
SIST EN ISO 28762:2012
INTERNATIONAL STANDARD ISO 28762:2010(E)
Vitreous and porcelain enamels — Enamel coatings applied to
steel for writing surfaces — Specification
WARNING — This International Standard calls for the use of substances and/or procedures that may
be injurious to health if adequate safety measures are not taken. This International Standard does not
address any health hazards, safety or environmental matters associated with its use. It is the
responsibility
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.