EN ISO 28762:2010

Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010)

ISO 28762:2010 specifies the requirements for the functional and aesthetic characteristics of vitreous and porcelain enamel coatings applied to plain steel, for use as writing surfaces (whiteboards and chalkboards).

Emails und Emaillierungen - Email-Schichten auf Stahl für Schreibtafeln - Anforderungen (ISO 28762:2010)

Diese Internationale Norm legt Anforderungen an die funktionellen und ästhetischen Eigenschaften von Email-
Schichten auf ebenen Stahlblechen fest, die als Schreibtafeln (Weißwandtafeln und Schultafeln) verwendet
werden.

Émaux vitrifiés - Revêtements en émail appliqués sur l'acier de surfaces d'écriture - Spécification (ISO 28762:2010)

L'ISO 28762:2010 spécifie les exigences relatives aux caractéristiques fonctionnelles et esthétiques des revêtements en émail vitrifié appliqués sur de l'acier non allié, destinés à servir de surfaces d'écriture (tableaux blancs et noirs).

Steklasti in porcelanski emajli - Emajlne prevleke za jeklo, katerega površine so namenjene za pisanje - Specifikacija (ISO 28762:2010)

Ta mednarodni standard določa zahteve za funkcionalne in estetske značilnosti steklastih in porcelanskih emajlnih prevlek, nanesenih na navadno jeklo, ki se uporabljajo kot površine za pisanje (table iz plastičnih mas in navadne šolske table).

General Information

• Status: Published
• Publication Date: 14-Nov-2010
• Withdrawal Date: 30-May-2011
• ICS: 25.220.50 - Enamels
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Nov-2010
• Completion Date: 15-Nov-2010
• Ref Project: SIST EN ISO 28762:2012 - Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification (ISO 28762:2010)

Relations

• Replaces: EN 14864:2005+A1:2007 - Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces - Specification
• Effective Date: 17-Oct-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 28762:2012
01-januar-2012
1DGRPHãþD
SIST EN 14864:2005+A1:2007
Steklasti in porcelanski emajli - Emajlne prevleke za jeklo, katerega površine so
namenjene za pisanje - Specifikacija (ISO 28762:2010)
Vitreous and porcelain enamels - Enamel coatings applied to steel for writing surfaces -
Specification (ISO 28762:2010)
Emails und Emaillierungen - Email-Schichten auf Stahl für Schreibtafeln - Anforderungen
(ISO 28762:2010)
Émaux vitrifiés - Revêtements en émail appliqués sur l'acier de surfaces d'écriture -
Spécification (ISO 28762:2010)
Ta slovenski standard je istoveten z: EN ISO 28762:2010
ICS:
25.220.50 Emajlne prevleke Enamels
SIST EN ISO 28762:2012 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 28762:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 28762:2012


EUROPEAN STANDARD
EN ISO 28762

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2010
ICS 25.220.50 Supersedes EN 14864:2005+A1:2007
English Version
Vitreous and porcelain enamels - Enamel coatings applied to
steel for writing surfaces - Specification (ISO 28762:2010)
Émaux vitrifiés - Revêtements en émail appliqués sur Emails und Emaillierungen - Email-Schichten auf Stahl für
l'acier de surfaces d'écriture - Spécification (ISO Schreibtafeln - Anforderungen (ISO 28762:2010)
28762:2010)
This European Standard was approved by CEN on 14 November 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28762:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 28762:2012
EN ISO 28762:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 28762:2012
EN ISO 28762:2010 (E)
Foreword
This document (EN ISO 28762:2010) has been prepared by Technical Committee ISO/TC 107 "Metallic and
other inorganic coatings" in collaboration with Technical Committee CEN/TC 262 “Metallic and other inorganic
coatings” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14864:2005+A1:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 28762:2010 has been approved by CEN as a EN ISO 28762:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 28762:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 28762:2012

INTERNATIONAL ISO
STANDARD 28762
Second edition
2010-11-15

Vitreous and porcelain enamels —
Enamel coatings applied to steel for
writing surface
...