Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves

This European Standard specifies the requirements for footvalves for use on transportable tanks with a minimum working pressure greater than 50 kPa for the transport of dangerous goods by road and rail.
It is applicable to equipment for use on tanks with gravity and/or pressure bottom loading and discharge.

Tanks für die Beförderung gefährlicher Güter - Ausrüstung für Tanks für die Beförderung flüssiger Chemieprodukte - Bodenventile

Diese Europäische Norm legt die Anforderungen an Bodenventile für die Verwendung an Tanks mit einem
maximalen Betriebsdruck von mehr als 50 kPa für die Beförderung gefährlicher Güter auf der Straße und auf
der Schiene fest.
Sie gilt für Ausrüstungen für Tanks mit Untenbefüllung und -entleerung mittels Schwerkraft und/oder Druck.

Citernes de transport de matieres dangereuses - Equipements de la citerne pour le transport de produits chimiques liquides - Clapets de fond

La présente Norme européenne prescrit les exigences relatives aux clapets de fond utilisés sur les citernes transportables dont la pression de service minimale est supérieure a 50 kPa et qui sont destinées au transport de matieres dangereuses par route et par fer. Elle est applicable aux équipements utilisés pour le chargement par le bas ou la vidange gravitaire et/ou sous pression des citernes.

Posode za prevoz nevarnih snovi – Oprema posode za transport tekočih kemikalij – Izpustni ventili

General Information

Status
Withdrawn
Publication Date
30-Sep-2006
Withdrawal Date
24-Nov-2014
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
19-Nov-2014
Due Date
12-Dec-2014
Completion Date
25-Nov-2014

Relations

Buy Standard

Standard
EN 14433:2006
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valvesCiternes de transport de matieres dangereuses - Equipements de la citerne pour le transport de produits chimiques liquides - Clapets de fondTanks für die Beförderung gefährlicher Güter - Ausrüstung für Tanks für die Beförderung flüssiger Chemieprodukte - BodenventileTa slovenski standard je istoveten z:EN 14433:2006SIST EN 14433:2006en23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:SLOVENSKI
STANDARDSIST EN 14433:200601-oktober-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14433April 2006ICS 13.300; 23.020.20 English VersionTanks for the transport of dangerous goods - Tank equipmentfor the transport of liquid chemicals - Foot valvesCiternes pour le transport de matières dangereuses -Equipements de la citerne pour le transport de produitschimiques liquides - Clapets de fondTanks für die Beförderung gefährlicher Güter - Ausrüstungfür Tanks für die Beförderung flüssiger Chemieprodukte -BodenventileThis European Standard was approved by CEN on 9 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14433:2006: E



EN 14433:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Function.4 5 Design and materials.4 6 Test media.5 7 Type tests.5 8 Production tests.7 9 Marking.7 10 Supply requirements.8 Annex A (normative)
Material of the valve casing.9 Annex B (normative)
Verification of valve design type.10



EN 14433:2006 (E) 3 Foreword This European Standard (EN 14433:2006) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



EN 14433:2006 (E) 4 1 Scope This European Standard specifies the requirements for footvalves for use on transportable tanks with a minimum working pressure greater than 50 kPa for the transport of dangerous goods by road and rail. It is applicable to equipment for use on tanks with gravity and/or pressure bottom loading and discharge. 2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12266-1:2003, Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements EN 12266-2:2002, Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements EN ISO 6708, Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 maximum working pressure MWP maximum pressure up to which the valve can be operated 3.2 nominal size designated size of valve as defined in EN ISO 6708 4 Function The footvalve is a primary valve located in the lower part of the tank to ensure that escape of product from the tank is prevented. 5 Design and materials 5.1 General The footvalve shall be designed for a working pressure of at least 300 kPa. The footvalve shall normally be a non-pressure balanced design. If the valve is a pressure balanced design, a surge pressure of 5 times the MWP shall not jeopardize the tightness of the housing or the function of the valve. The manufacturer shall specify in drawings and other papers, the design and the materials of the footvalve. The valve specification shall include information regarding mating tank flange details.



EN 14433:2006 (E) 5 5.2 Design 5.2.1 The valve shall provide a closure located within the envelope of the tank. 5.2.2 The valve closure shall be positioned so that the pressure in the tank acts to increase the force on the valve seat, and shall be so designed as to prevent self-opening of the valve. 5.2.3 The opening of the valve shall be such as to give a minimum flow path through the valve of a diameter equal to the DN designation of the valve. 5.2.4 The operating mechanism shall be protected from inadvertent operation in transit either by a latching device or by locating within an enclosure. 5.2.5 As a minimum, each valve shall be marked with the direction of opening of the operating mechanism. 5.2.6 The external valve casing shall have a weakened section (e.g. a shear groove in the external casing or other appropriate means) so positioned that should the valve casing be removed by a severe impact, the sealing ca
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.