iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12111:2003/kprA1:2009

(Amendment)

Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements

Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements

Tunnelbaumaschinen - Teilschnittmaschinen, Continuous miners und Schlagkopfmaschinen - Sicherheitstechnische Anforderungen

Machines pour la construction de tunnels - Machines à attaque ponctuelle, mineurs continus et brise-roches hydrauliques - Règles de sécurité

Stroji za gradnjo predorov - Odkopne naprave - Varnostne zahteve

General Information

Status
Not Published
Public Enquiry End Date
08-Mar-2009
ICS
91.220 - Construction equipment
93.060 - Tunnel construction
Technical Committee
I13 - Imaginarni 13
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
14-Oct-2019
Due Date
19-Oct-2019
Completion Date
14-Oct-2019
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 12111:2002/prA1 - Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements

Relations

Consolidated By
SIST EN 12111:2003+A1:2009 - Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements
Effective Date
18-Jan-2023
Revised
SIST EN 12111:2003 - Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements
Effective Date
01-Feb-2009
Consolidated By
SIST EN 12111:2003+A1:2009 - Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements
Effective Date
19-Jan-2023
Consolidated By
SIST EN 12111:2003+A1:2009 - Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirements
Effective Date
01-Sep-2009

Buy Standard

EN 12111:2003/kprA1:2009EN 12111:2003/kprA1:2009
PreviousNext
Draft
EN 12111:2003/kprA1:2009
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12111:2003/kprA1:2009
01-februar-2009
Stroji za gradnjo predorov - Odkopne naprave - Varnostne zahteve
Tunnelling machines - Road headers, continuous miners and impact rippers - Safety
requirements
Tunnelbaumaschinen - Teilschnittmaschinen, Continuous miners und
Schlagkopfmaschinen - Sicherheitstechnische Anforderungen
Machines pour la construction de tunnels - Machines à attaque ponctuelle, mineurs
continus et brise-roches hydrauliques - Règles de sécurité
Ta slovenski standard je istoveten z: EN 12111:2002/prA1
ICS:
91.220 Gradbena oprema Construction equipment
93.060 Gradnja predorov Tunnel construction
SIST EN 12111:2003/kprA1:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12111:2003/kprA1:2009

---------------------- Page: 2 ----------------------

SIST EN 12111:2003/kprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 12111:2002
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2008
ICS 91.220; 93.060

English Version
Tunnelling machines - Road headers, continuous miners and
impact rippers - Safety requirements
Machines pour la construction de tunnels - Machines à Tunnelbaumaschinen - Teilschnittmaschinen, Continuous
attaque ponctuelle, mineurs continus et brise-roches miners und Schlagkopfmaschinen - Sicherheitstechnische
hydrauliques - Règles de sécurité Anforderungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 12111:2002. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12111:2002/prA1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12111:2003/kprA1:2009
EN 12111:2002/prA1:2008 (E)
Contents Page
Foreword.3
1 Modification to Clause 2 .4
2 Modification to 5.1.1 .4
3 Modification to 5.6.4.1 .4
4 Addition of 5.6.6.4
5 Modification to 7.1 .4
6 Modification to 7.2.2 .5
7 Modification to 7.3.1 .5
8 Modification to Annex ZA .6
9 Addition of Annex ZB .7



2

---------------------- Page: 4 ----------------------

SIST EN 12111:2003/kprA1:2009
EN 12111:2002/prA1:2008 (E)
Foreword
This document (EN 12111:2002/prA1:2008) has been prepared by Technical Committee CEN/TC 151
“Construction equipment and building material machines - Safety”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annex ZA, B, C or D, which is an integral part of this
document.
The main changes compared to the previous version are:
 Addition of Annex ZB;
 Editorial modification of Annex ZA;
 “Minor” changes of sub-clauses 5.6.6, 7.1, 7.2.2 and 7.3.1;
 reference to EN 292-1 be replaced by EN ISO 12100-1:2003 and EN 292-2 be replace by
EN ISO 12100-2: 2003.
3

---------------------- Page: 5 ----------------------

SIST EN 12111:2003/kprA1:2009
EN 12111:2002/prA1:2008 (E)

1 Modification to Clause 2
Replace "EN 292-1:1991" with "EN ISO 12100-1:2003 Safety of machinery — Basic concepts, general
principles for design — Part 1: Basic termino
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12110:2014(Main)
Tunnelling machines - Air locks - Safety requirements
EN 12110:2014

EN 12110 applies to the design, construction, equipping, marking and testing of air locks as defined in 3.3 including pressure bulkheads as defined in 3.4, which are to be used in tunnelling work. An oxygen breathing system used to provide the breathing supply necessary to conduct a safe decompression is also covered by this standard. This European Standard is not applicable to machinery and equipment which is manufactured before the date of publication of this document by CEN. This European Standard deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard does not cover the supply of services to the air lock. Vibration, noise and EMC (Electromagnetic compatibility) hazards are not significant hazards for air locks. This European Standard does not cover the hazards due to the mobility of the machinery.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16191:2014(Main)
Tunnelling machinery - Safety requirements
EN 16191:2014

EN 16191 is applicable to tunnelling machinery as defined in Clause 3 used for the construction of tunnels, shafts and other underground excavations. It deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard covers monitoring for hazardous atmospheres within the confines of the tunnelling machinery. Hand-arm and whole-body vibration are not considered as significant hazard for tunnelling machinery. The following items and applications are not covered by this European Standard: - the additional requirements for the use of tunnelling machinery under hyperbaric conditions; - the additional requirements for use of tunnelling machinery in potentially explosive atmospheres.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12111:2014(Main)
Tunnelling machines - Road headers and continuous miners - Safety requirements
EN 12111:2014

EN 12111 specifies all significant hazards, hazardous situations and events relevant to road headers and continuous miners as defined in Clause 3, when they are used as intended and under the conditions foreseen by the manufacturer. Where mentioned, this standard applies also to cutter head attachments and impact hammers mounted on excavators and in tunnel shields. This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. Within the conditions stated by the manufacturer, overturning of the road header or continuous miner is not a significant hazard. Noise is not a significant hazard for cutter head attachments. Excavators and tunnel shields mentioned above are out with the scope of this standard and are covered by EN 474+A1 and EN 12336+A1 respectively. This European Standard also covers reasonably foreseeable misuse of such machinery in that compliance with the requirements of Clause 5 mitigates the risk arising from such misuse. The following items and applications are not covered by this European Standard: - the supply of electricity up to the main switch box; - use of the machine in potentially explosive atmospheres; - use of the machine under hyperbaric conditions - loading and transport equipment which is not an integral part of the machine; This European Standard covers monitoring for hazardous atmospheres. This European Standard is not applicable to machines manufactured before the date of publication of this European Standard by CEN.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 16191:2023(Main)
Tunnel boring machines - Safety requirements
prEN 16191

This document is applicable to tunnel boring machines and associated machines and equipment as defined in Clause 3 used for the primary purpose of creating an underground void through the construction of horizontal and inclined tunnels and other underground excavations.
NOTE 1    Other underground excavations can include access structures to complex tunnel layouts such as in underground stations, utilities, underground storage facilities as well as below ground tunnel portals.
It deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see 4).
This document covers monitoring for hazardous atmospheres within the confines of the tunnel boring machines.
Requirements for air locks and pressurized transfer shuttles are covered by prEN 12110-1:2023 and prEN 12110-2:2023.
Hand-arm and whole-body vibration are not considered as significant hazards for tunnel boring machines.
The following items and applications are not covered by this document:
-   the additional requirements for the use of entire tunnelling machinery within a hyperbaric environment;
-   the additional requirements for use of tunnel boring machines in potentially explosive atmospheres;
NOTE 2    For the application in potentially explosive atmospheres, see EN ISO/IEC 80079 38:2016 for guidance.
-   ancillary tools and equipment which are not an integral part of the tunnel boring machine, but located on the machinery;
-   supply network for services to the tunnel boring machine (e.g. power supply, water, pipes, compressed air, ventilation duct, etc.);
-   loading and transport machinery which is not an integral part of the tunnel boring machine, e.g. delivery vehicle for logistic support, tunnel spoil removal system;
-   EMC interactions between the tunnelling machinery and third-party surface and underground assets, e.g. railway signalling.
This document is not applicable to tunnel boring machines which are manufactured before the date of publication of this European Standard by CEN.

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12110-1:2023(Main)
Tunnel boring machines - Air locks - Part 1: requirements for air locks utilising compressed air as the pressurising or breathing medium along with requirements for oxygen breathing systems for decompression purposes
prEN 12110-1

This document applies to the design, construction, equipping, marking and testing of air locks, as defined in 3.3, which form an integral part of a tunnel boring machine. It covers requirements for personnel locks utilizing compressed air as the pressurizing or breathing medium along with requirements for oxygen breathing systems for decompression purposes. The intended use is restricted to the temperature range 5 °C to 50 °C.
This document also applies to the design, fabrication and testing of pressure bulkheads intended for use in forming in-tunnel or in-shaft air locks.
In addition, this document extends to control functions and control information relating to intermediate chambers (defined in prEN 12110-2:2023, 3.7) (if fitted) but which are accessed via the personnel lock control panel.
prEN 12110-2 sets out additional requirements to those in Part 1, for personnel locks which are intended to have the capability to utilize non-air breathing mixtures such as nitrox, trimix and heliox. prEN 12110 2 sets out additional requirements for personnel locks intended to be used for saturation exposure techniques at pressures not exceeding 20 bar(g) associated with tunnelling work. It also sets out requirements for pressurized transfer shuttles as defined in 3.3.5.
The intended use of the machinery is agreed between the manufacturer and the user taking into account information on intended use, intended location of use, intended exposure techniques and intended decompression procedures, all provided by the user.
Air locks are normally connected to or incorporated in tunnel boring machines and consequently there are a number of interfaces between machinery covered by this standard and machinery covered by prEN 16191:2022. These interfaces are identified in both standards as appropriate.
This document is not applicable to machinery and equipment which is manufactured before the date of publication of this document by CEN.
NOTE 1   Air locks can be formed by the construction of one or more bulkheads in a tunnel secured to the tunnel lining. However, although the equipment required for tunnel air locks will be similar to that for TBM air locks, prEN 12110-1:2023 applies only to the design, fabrication and testing of bulkheads in this situation.
NOTE 2   Air locks can also be attached to an air deck in a shaft. Again, although the equipment required for such air locks will be similar to that for TBM air locks, prEN 12110-1:2023 applies only to the design, fabrication and testing of bulkheads (air decks) in shafts.
This document deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
The supply of compressed air and oxygen to the air lock is partly within the scope of prEN 12110-1:2023 and partly within the scope of prEN 16191:2022 and this division is clearly indicated within the text of both standards.
Vibration, noise and EMC (Electromagnetic compatibility) hazards are not significant hazards for air locks.

  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12110-2:2023(Main)
Tunnel boring machines - Air locks - Part 2: Safety requirements for the use of non-air breathing mixtures and saturation techniques in personnel locks and for pressurised transfer shuttles
prEN 12110-2

This document sets out additional requirements to those in prEN 12110-1 for personnel locks which are intended to have the capability for mixed gas breathing techniques or saturation techniques at pressures not exceeding 20 bar(g) and associated with tunnelling work. This document also sets out requirements for pressurized transfer shuttles as defined in 3.1.
prEN 12110-1 applies to the design, construction, equipping, marking and testing of air locks, as defined in 3.3, in tunnelling. prEN 12110-1 also covers requirements for manlocks utilizing compressed air as the pressurizing and breathing medium along with requirements for oxygen breathing systems for decompression purposes.
Air locks are normally an integral part of TBMs. Hence there are interfaces between the scope of prEN 12110-1:2023 and prEN 16191:2022. These are detailed in Clause 4 of this document.
The intended use of the machinery is agreed between the manufacturer and the user taking into account information on intended use, exposure techniques and decompression procedures provided by the user.
This document is not applicable to machinery and equipment which is manufactured before the date of publication of this document by CEN.
NOTE   This document can help the design of air locks and bulkheads in other compressed air work in construction.
This document deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document does not cover the supply of services to the air lock from beyond the defined prEN 12110 1:2023/prEN 16191:2022 interface. This interface is set out in the text.
Vibration, noise and EMC (Electromagnetic compatibility) hazards are not significant hazards for air locks.
The provision of mixed gas, air or oxygen is the responsibility of the user.
During transfer under pressure operations, the shuttle requires a fire suppression system, a climate control system, a power supply and a gas supply. Of these, the fire suppression system requires to be continuously connected and available for immediate activation. It is therefore considered to be part of the shuttle equipment covered by this standard as is the power supply. For the other two services only the capability to supply them is considered to be part of the shuttle requirements.

  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12110:2014(Main)
Tunnelling machines - Air locks - Safety requirements
EN 12110:2014

EN 12110 applies to the design, construction, equipping, marking and testing of air locks as defined in 3.3 including pressure bulkheads as defined in 3.4, which are to be used in tunnelling work. An oxygen breathing system used to provide the breathing supply necessary to conduct a safe decompression is also covered by this standard. This European Standard is not applicable to machinery and equipment which is manufactured before the date of publication of this document by CEN. This European Standard deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard does not cover the supply of services to the air lock. Vibration, noise and EMC (Electromagnetic compatibility) hazards are not significant hazards for air locks. This European Standard does not cover the hazards due to the mobility of the machinery.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16191:2014(Main)
Tunnelling machinery - Safety requirements
EN 16191:2014

EN 16191 is applicable to tunnelling machinery as defined in Clause 3 used for the construction of tunnels, shafts and other underground excavations. It deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard covers monitoring for hazardous atmospheres within the confines of the tunnelling machinery. Hand-arm and whole-body vibration are not considered as significant hazard for tunnelling machinery. The following items and applications are not covered by this European Standard: - the additional requirements for the use of tunnelling machinery under hyperbaric conditions; - the additional requirements for use of tunnelling machinery in potentially explosive atmospheres.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12111:2014(Main)
Tunnelling machines - Road headers and continuous miners - Safety requirements
EN 12111:2014

EN 12111 specifies all significant hazards, hazardous situations and events relevant to road headers and continuous miners as defined in Clause 3, when they are used as intended and under the conditions foreseen by the manufacturer. Where mentioned, this standard applies also to cutter head attachments and impact hammers mounted on excavators and in tunnel shields. This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards. Within the conditions stated by the manufacturer, overturning of the road header or continuous miner is not a significant hazard. Noise is not a significant hazard for cutter head attachments. Excavators and tunnel shields mentioned above are out with the scope of this standard and are covered by EN 474+A1 and EN 12336+A1 respectively. This European Standard also covers reasonably foreseeable misuse of such machinery in that compliance with the requirements of Clause 5 mitigates the risk arising from such misuse. The following items and applications are not covered by this European Standard: - the supply of electricity up to the main switch box; - use of the machine in potentially explosive atmospheres; - use of the machine under hyperbaric conditions - loading and transport equipment which is not an integral part of the machine; This European Standard covers monitoring for hazardous atmospheres. This European Standard is not applicable to machines manufactured before the date of publication of this European Standard by CEN.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 16191:2023(Main)
Tunnel boring machines - Safety requirements
prEN 16191

This document is applicable to tunnel boring machines and associated machines and equipment as defined in Clause 3 used for the primary purpose of creating an underground void through the construction of horizontal and inclined tunnels and other underground excavations.
NOTE 1    Other underground excavations can include access structures to complex tunnel layouts such as in underground stations, utilities, underground storage facilities as well as below ground tunnel portals.
It deals with all significant hazards, hazardous situations and events relevant to such machinery when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see 4).
This document covers monitoring for hazardous atmospheres within the confines of the tunnel boring machines.
Requirements for air locks and pressurized transfer shuttles are covered by prEN 12110-1:2023 and prEN 12110-2:2023.
Hand-arm and whole-body vibration are not considered as significant hazards for tunnel boring machines.
The following items and applications are not covered by this document:
-   the additional requirements for the use of entire tunnelling machinery within a hyperbaric environment;
-   the additional requirements for use of tunnel boring machines in potentially explosive atmospheres;
NOTE 2    For the application in potentially explosive atmospheres, see EN ISO/IEC 80079 38:2016 for guidance.
-   ancillary tools and equipment which are not an integral part of the tunnel boring machine, but located on the machinery;
-   supply network for services to the tunnel boring machine (e.g. power supply, water, pipes, compressed air, ventilation duct, etc.);
-   loading and transport machinery which is not an integral part of the tunnel boring machine, e.g. delivery vehicle for logistic support, tunnel spoil removal system;
-   EMC interactions between the tunnelling machinery and third-party surface and underground assets, e.g. railway signalling.
This document is not applicable to tunnel boring machines which are manufactured before the date of publication of this European Standard by CEN.

  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day