Abstract

This document is applicable to all rail vehicles including OTMs and Road-rail machines, which are operated on the heavy rail network with standard track gauge 1 435 mm and nominal static vertical wheelset forces up to 350 kN.
This document may also be applicable (partly or in full) to:
—   rail systems with different track layout, e.g. urban rail systems and/or;
—   rail systems with other than 1 435 mm nominal track gauge and/or;
—   non-public rail networks and vehicles, e.g. mine rail systems.
NOTE   For rail systems other than 1 435 mm track gauge or urban rail systems, the related post analysis, limit values and test conditions could be different. They are specified nationally or individually taking into account track design and operating conditions.
This document defines the assessment of rail vehicles according to stationary test methods that are not obligatory on European level:
—   determination of displacement characteristics;
—   loading of the diverging branch of a switch;
—   running safety in curved crossings for vehicles with small wheels.
It includes information about the field of possible applications.

Status
Not Published
Public Enquiry End Date
10-Sep-2025
Technical Committee
IŽNP - Reilway applications
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
11-Nov-2026
Due Date
30-Dec-2026
Completion Date
11-Nov-2026

Buy Documents

Draft

oSIST prEN 14363-3:2025 - BARVE

English language (23 pages)
Preview
Preview
e-Library read for
×1 day

kSIST FprEN 14363-3:2026 is the Slovenian version of the draft European Standard prEN 14363-3:2025 from CEN. It covers stationary tests for the acceptance of running characteristics of railway vehicles on the heavy rail network, including methods for displacement characteristics, loading of the diverging branch of a switch, and running safety in curved crossings for vehicles with small wheels. It is aimed at the people who need a common test basis for these vehicle assessments - manufacturers, test laboratories, assessors, and railway engineers.

What does kSIST FprEN 14363-3:2026 specify?

kSIST FprEN 14363-3:2026 specifies stationary test methods that are not obligatory on a European level for railway vehicles operated on the heavy rail network with standard track gauge 1 435 mm and nominal static vertical wheelset forces up to 350 kN. The same methods may also be applied, partly or fully, to other rail systems such as urban rail systems, other gauges, and non-public networks, but the related limit values and test conditions may be set nationally or case by case.

The document is structured into clauses 1 to 6, followed by a bibliography. Clause 4 covers displacement characteristics, Clause 5 covers loading of the diverging branch of a switch, and Clause 6 covers the assessment of vehicles with small wheels in curved crossings.

The scope also names safety against derailment under longitudinal compressive forces in S-shaped curves as part of the stationary test family. In practice, that tells the reader that this part belongs to a wider acceptance framework, even though the detailed methods are handled in the later clauses.

What are the key requirements of kSIST FprEN 14363-3:2026?

Displacement characteristics, Clause 4

kSIST FprEN 14363-3:2026 gives two alternative ways to determine displacement characteristics, and only one needs to be used. Clause 4 links these measurements to gauging work under EN 15273-2, so the results feed into clearance assessment and not just into a test report.

  • Method 1 - stationary test: the vehicle is measured while standing on track that can be inclined in both directions to simulate cant excess and cant deficiency. This is the cleanest way to isolate body roll and lateral displacement from running effects.
  • Method 2 - on-track test: the vehicle is measured in curved track using either lateral accelerations or roll movements. The document requires at least 25 curved track sections, which matters because the result must represent a real range of curve conditions.
  • Air springs: if the levelling system response time affects body roll, the levelling valves are disconnected so the air springs act as passive elements. That avoids mixing control-system behaviour with suspension behaviour.
  • Measured quantities: the document requires measurements from which roll angles, a flexibility coefficient, and, where needed, lateral movements and point height can be derived. In practice, this is the data set used to prove how much the vehicle body moves under cant.
  • Cant range for evaluation: the test must cover positive and negative cant, with the extreme test cant beyond the operating cant range. That gives enough data to evaluate hysteresis and avoid a result based on only one loading direction.
  • Signal processing: for the on-track method, the clause points to the evaluation procedure in prEN 14363-4. That means the raw accelerations or roll signals are not used directly without the prescribed processing.

Switch loading, Clause 5

kSIST FprEN 14363-3:2026 presents a methodology for the loading of the diverging branch of a switch when a national requirement exists. The clause is about the vehicle response to the nominal switch layout, not about track defects or wear.

  • Method A uses a specially prepared S-curve test site with a maximum radius of 190 m, a 6 m straight section, and force measurement on the rails. This is the preferred arrangement when a dedicated test site is available.
  • Method B uses load measuring wheels on an in-service crossover, preferably two crossings with slips or two turnouts. This is the practical option when the measurement is made on existing track.
  • Test conditions require loose coupling, no traction, dry rails, and at least 3 runs. That helps isolate the vehicle-track interaction being studied.
  • Assessment is based on the measured lateral and vertical track forces Y and Q, with a defined calculation for the outer wheel results. The clause gives a repeatable way to compare runs and select the relevant maximum.
  • Documentation should include the inner-rail Y/Q ratio, track maintenance state, and signal processing method. That makes the result traceable and useful for later review.

Small wheels in curved crossings, Clause 6

kSIST FprEN 14363-3:2026 sets a method for vehicles with minimum permitted wheel diameters d ≤ 840 mm that are intended for networks with obtuse crossings in curves. The clause uses a fixed crossing geometry and then checks whether the vehicle can pass it safely.

  • Test conditions use an empty vehicle in a 450 m curve with 0 mm cant, at speeds from 10 km/h up to the maximum service speed, with the highest speed repeated three times. This creates a controlled basis for comparing vehicles.
  • Method 1 checks angle of attack together with lateral axle box forces H or the sum of lateral wheel forces ΣY. This method can be used without a physical crossing installed in the curve.
  • Method 2 checks angle of attack together with the impact on the crossing nose, including visualisation of the wheel path with paint. This method requires both dry and wet rail conditions.
  • Limit values are given for angle of attack and for the force-based criteria, depending on wheel diameter and related flange height. That is what turns the geometry into an acceptance check.
  • Dispensation can be granted from a tested reference vehicle if the reference results are sufficiently below the limit values and the relevant vehicle parameters stay within the allowed change ranges from prEN 14363-4. This gives a controlled route for similar designs.
  • Simulation is allowed only under the conditions given in prEN 14363-5. In practice, that tells the user when test results may be replaced by calculation.

What terms does kSIST FprEN 14363-3:2026 define?

kSIST FprEN 14363-3:2026 uses the terms and definitions from prEN 14363-1:2025 and EN 17343:2023. The most important technical terms in this part are the ones that shape the test method and the acceptance result.

  • Flexibility coefficient - the ratio used to describe how vehicle body roll follows cant in the displacement characteristic tests.
  • Cant deficiency - the curve condition that drives lateral loading when the cant is lower than needed for the speed.
  • Cant excess - the opposite curve condition, used to check behaviour when the cant is higher than needed.
  • Defined gauging - the gauging approach that uses the measured flexibility coefficient from the standing or on-track tests.
  • Dynamic gauging - the gauging approach that uses measured or computed displacements to support clearance assessment.
  • Running clearance - the wheel-to-rail clearance used in the curved-crossing assessment.
  • Angle of attack - the geometric attack angle used to judge wheel behaviour in curved crossings.
  • Dispensation - the controlled exemption route that allows a similar vehicle to use prior results under stated conditions.

Who uses kSIST FprEN 14363-3:2026?

kSIST FprEN 14363-3:2026 is used by rolling stock manufacturers, railway vehicle test laboratories, assessors, and engineers responsible for vehicle acceptance. It is also relevant to infrastructure and safety teams that need a common method for switch loading or small-wheel crossing assessments.

In practice, users apply it when they set up stationary tests, record body movement or track forces, document load conditions, and compare the results with gauging or national acceptance requirements.

What changed in kSIST FprEN 14363-3:2026 from the previous edition?

kSIST FprEN 14363-3:2026 is part of the EN 14363 series that will supersede EN 14363:2016+A2:2022. The foreword places this part with prEN 14363-1, -2, -4 and -5 in the updated series structure.

Which standards are used with kSIST FprEN 14363-3:2026?

  • prEN 14363-1:2025 - gives the general rules for application, vehicle conditions, fault modes, and common test requirements.
  • EN 15273-2:2013+A1:2016 - provides the rolling stock gauge requirements that drive the displacement-characteristic assessment.
  • EN 17343:2023 - supplies the general railway terms and definitions used across the series.
  • EN 15273-1:2013+A1:2016 - supports the gauging calculations referred to in Clause 4.
  • prEN 14363-4:2025 - gives the signal-processing and evaluation procedures used for on-track measurements and force processing.
  • prEN 14363-5:2025 - covers simulation and calculation routes, including when test results may be replaced or dispensation may apply.

What does the kSIST FprEN 14363-3:2026 document contain?

The document contains the test setups, measurement quantities, and evaluation procedures for the three main assessment topics in this part. Clause 4 includes the standing and on-track methods for displacement characteristics, with example plots and derived quantities shown in Figures 1 to 4.

Clause 5 includes the S-curve test layouts, the two loading methods, and a worked force-evaluation example in Figure 7. Clause 6 includes the curved-crossing geometry, the application limits, and the limit-value tables and figures used for the small-wheel assessment, including Tables 1 to 3 and Figures 8 to 10.

The document also gives formulas for derived quantities and evaluation steps, rather than only descriptive text. That makes it usable both for test planning and for checking how the recorded data are turned into an acceptance result.

Relations

Effective Date
28-Jan-2026
Effective Date
28-Jan-2026
Effective Date
28-Jan-2026
Effective Date
28-Jan-2026
Effective Date
28-Jan-2026
Effective Date
14-Sep-2022
Effective Date
20-Oct-2021

Buy Documents

Draft

oSIST prEN 14363-3:2025 - BARVE

English language (23 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

IRIS Certification (UNIFE)

International Railway Industry Standard certification.

BELAC Belgium Verified

TÜV SÜD Rail GmbH

TÜV SÜD railway certification services.

DAKKS Germany Verified

Bureau Veritas Railway Certification

Railway and transportation certification.

COFRAC France Verified

Sponsored listings

Frequently Asked Questions

kSIST FprEN 14363-3:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles operated on the heavy rail network - Part 3: Stationary tests not obligatory on a European level". This standard covers: This document is applicable to all rail vehicles including OTMs and Road-rail machines, which are operated on the heavy rail network with standard track gauge 1 435 mm and nominal static vertical wheelset forces up to 350 kN. This document may also be applicable (partly or in full) to: — rail systems with different track layout, e.g. urban rail systems and/or; — rail systems with other than 1 435 mm nominal track gauge and/or; — non-public rail networks and vehicles, e.g. mine rail systems. NOTE For rail systems other than 1 435 mm track gauge or urban rail systems, the related post analysis, limit values and test conditions could be different. They are specified nationally or individually taking into account track design and operating conditions. This document defines the assessment of rail vehicles according to stationary test methods that are not obligatory on European level: — determination of displacement characteristics; — loading of the diverging branch of a switch; — running safety in curved crossings for vehicles with small wheels. It includes information about the field of possible applications.

This document is applicable to all rail vehicles including OTMs and Road-rail machines, which are operated on the heavy rail network with standard track gauge 1 435 mm and nominal static vertical wheelset forces up to 350 kN. This document may also be applicable (partly or in full) to: — rail systems with different track layout, e.g. urban rail systems and/or; — rail systems with other than 1 435 mm nominal track gauge and/or; — non-public rail networks and vehicles, e.g. mine rail systems. NOTE For rail systems other than 1 435 mm track gauge or urban rail systems, the related post analysis, limit values and test conditions could be different. They are specified nationally or individually taking into account track design and operating conditions. This document defines the assessment of rail vehicles according to stationary test methods that are not obligatory on European level: — determination of displacement characteristics; — loading of the diverging branch of a switch; — running safety in curved crossings for vehicles with small wheels. It includes information about the field of possible applications.

kSIST FprEN 14363-3:2026 is classified under the following ICS (International Classification for Standards) categories: 45.060.01 - Railway rolling stock in general. The ICS classification helps identify the subject area and facilitates finding related standards.

kSIST FprEN 14363-3:2026 has the following relationships with other standards: It is inter standard links to SIST EN 15502-2-1:2022+A1:2024, SIST EN 15807:2021, SIST EN 15566:2022, SIST EN 15551:2022, SIST EN 15502-2-1:2022, SIST EN 14363:2016+A2:2022, SIST EN 14363:2016+A1:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

kSIST FprEN 14363-3:2026 is associated with the following European legislation: Standardization Mandates: M/591. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

kSIST FprEN 14363-3:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN 14363-3:2025
01-september-2025
Železniške naprave - Preskušanje in simulacija za oceno voznih lastnosti
železniških vozil, ki obratujejo na omrežju težkih železniških prog - 3. del:
Stacionarni preskusi, neobvezni na evropski ravni
Railway applications - Testing and simulation for the acceptance of running
characteristics of railway vehicles operated on the heavy rail network - Part 3: Stationary
tests not obligatory on a European level
Bahnanwendungen - Prüfungen und Simulationen für die Bewertung der fahrtechnischen
Eigenschaften von Schienenfahrzeugen, die auf dem Vollbahnnetz betrieben werden -
Teil 3: Stationäre Prüfungen, die auf Europäischer Ebene nicht obligatorisch sind
Applications ferroviaires - Essais en vue de l'évaluation du comportement dynamique
des véhicules ferroviaires circulant sur un réseau du système ferroviaire lourd - Partie 3 :
Essais stationnaires non obligatoires au niveau européen
Ta slovenski standard je istoveten z: prEN 14363-3
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
oSIST prEN 14363-3:2025 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 14363-3:2025
oSIST prEN 14363-3:2025
DRAFT
EUROPEAN STANDARD
prEN 14363-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2025
ICS Will supersede EN 14363:2016+A2:2022
English Version
Railway applications - Testing and simulation for the
acceptance of running characteristics of railway vehicles -
Part 3: Stationary tests not obligatory on a European level
Applications ferroviaires ¿ Essais en vue de l'évaluation Bahnanwendungen - Versuche und Simulationen für
du comportement dynamique des véhicules die Bewertung der fahrtechnischen Eigenschaften von
ferroviaires circulant sur un réseau du système Schienenfahrzeugen, die auf dem Vollbahnnetz
ferroviaire lourd ¿ Partie 3 : Essais stationnaires non betrieben werden - Teil 3: Stationäre Prüfungen, die
obligatoires au niveau Européen auf Europäischer Ebene nicht obligatorisch sind
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14363-3:2025 E
worldwide for CEN national Members.

oSIST prEN 14363-3:2025
prEN 14363-3:2025 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Determination of displacement characteristics . 7
4.1 General. 7
4.2 Assessment Requirements . 7
4.3 Test conditions . 7
4.3.1 General. 7
4.3.2 Vehicle test conditions . 7
4.3.3 Load condition . 7
4.3.4 Fault mode conditions . 8
4.4 Method 1: Stationary test . 8
4.4.1 General. 8
4.4.2 Vehicles with air springs . 8
4.4.3 Test site . 8
4.4.4 Measured and derived quantities . 8
4.4.5 Data for evaluation of flexibility coefficient (for Defined Gauging) . 9
4.4.6 Data for computation of displacements (for dynamic gauging) . 10
4.5 Method 2 ─ On-track test . 11
4.5.1 General. 11
4.5.2 Measurement of lateral accelerations . 11
4.5.3 Measurement of roll movements . 12
4.5.4 Evaluation . 12
5 Loading of the diverging branch of a switch . 12
5.1 Introduction . 12
5.2 Track alignment and assessment areas . 13
5.3 Test conditions . 13
5.4 Method A . 14
5.5 Method B . 14
5.6 Assessment of the test result . 15
5.7 Dispensation . 15
5.8 Documentation . 15
6 Assessment of the behaviour of vehicles with small wheels in curved crossings . 17
6.1 General. 17
6.2 Area of application . 17
6.3 Description of the crossing geometry. 17
6.4 Test conditions . 20
6.4.1 General. 20
6.4.2 Method 1: Lateral forces and angle of attack . 21
6.4.3 Method 2: Examination of the impact on the crossing nose . 21
6.4.4 Limited values . 21
oSIST prEN 14363-3:2025
prEN 14363-3:2025 (E)
6.4.5 Assessment . 22
6.4.6 Dispensation . 22
6.4.7 Simulation . 22
Bibliography . 23

oSIST prEN 14363-3:2025
prEN 14363-3:2025 (E)
European foreword
This document (prEN 14363-3:2025) has been prepared by Technical Committee CEN/TC 256 “Railway
Applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document together with prEN 14363-1:2025, prEN 14363-3:2025, prEN 14363-4:2025 and
prEN 14363 5:2025, will supersede EN 14363:2016+A2:2022.
The EN 14363 Series “Railway applications — Testing and Simulation for the assessment of running
characteristics of rail vehicles operated on the heavy rail network” consists of the following parts:
— prEN 14363-1:2025, General;
— prEN 14363-2:2025, Safety against derailment on twisted track;
— prEN 14363-3:2025, Stationary tests that are not obligatory on European level;
— prEN 14363-4:2025, On-track testing;
— prEN 14363-5:2025, Simulations/calculations;
— prCEN/TR 14363-6:2025, Technical Report providing background information to the EN 14363 series
of standards (under development).
oSIST prEN 14363-3:2025
prEN 14363-3:2025 (E)
Introduction
General information for the application of this document is given in prEN 14363-1:2025.
oSIST prEN 14363-3:2025
prEN 14363-3:2025 (E)
1 Scope
This document applies to all railway vehicles including OTM’s and Road-rail machines, which are
operated on the heavy rail network with standard track gauge 1 435°mm and nominal static vertical
wheelset forces up to 350 kN.
This document may also be applicable (partly or in full) to:
— rail systems with different track layout, e.g. urban rail systems and/or;
— rail systems with other than 1 435 mm nominal track gauge and/or;
— non-public rail networks and vehicles, e.g. mine rail systems.
NOTE For rail systems other than 1 435 mm track gauge or urban rail systems, the related post analysis, limit
values and test conditions could be different. They are specified nationally taking into account track design and
operating conditions.
This document contains the assessment of railway vehicles according to stationary test methods that are
not obligatory on European level:
— determination of displacement characteristics;
— loading of the diverging branch of a switch;
— running safety in curved crossings for vehicles with small wheels;
— safety against derailment under longitudinal compressive forces in S-shaped curves.
It includes information about the field of possible applications.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
prEN 14363-1:2025, Railway applications — Testing and Simulation for the assessment of running
characteristics of rail vehicles operated on the heavy rail network — Part 1: General
EN 15273-2:2013+A1:2016, Railway applications - Gauges - Part 2: Rolling stock gauge
EN 17343:2023, Railway applications - General terms and definitions
3 Terms and definitions
For the purposes of this document, the terms and definitions given in prEN 14363-1:2025 and
EN 17343:2023 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/

At draft stage.
oSIST prEN 14363-3:2025
prEN 14363-3:2025 (E)
4 Determination of displacement characteristics
4.1 General
The determination of displacement characteristics are related to the requirements of
EN 15273-2:2013+A1:2016.
The tests described in this document evaluate the vehicle body's displacement characteristics caused by
lateral forces acting on the vehicle body arising from cant excess and cant deficiency. With the tests
described here it is possible to determine inputs for gauging calculations, as defined in
EN 15273-1:2013+A1:2016 and required in EN 15273-2:2013+A1:2016.
NOTE It could also be useful to apply the test to confirm that the displacements of the vehicle in roll around
the x-axis and the characteristics for the installed suspension components are within the design limits. It is also
possible to use the results for computer model validation.
Two alternative assessment methods are specified that may be used to determine the displacement
characteristics of the vehicle. Only one assessment method is required to be used.
— Assessment method 1: Vehicle while standing. The determination of the displacement
characteristics is carried out by measurements of the vehicle while standing.
— Assessment method 2: On-track testing. Determination of the displacement characteristics during
on-track tests is carried out either by measurement of accelerations in the vehicle body or by
measurement of the relative movement of parts within the vehicle together with the cant deficiency.
Alternatively, simulation as described in prEN 14363-5:2024, Clause 5 can be used.
4.2 Assessment Requirements
No assessment requirements are specified in this sub clause, only the methods of testing are defined. The
appropriate assessment requirement is determined by reference to EN 15273-2:2013+A1:2016.
4.3 Test conditions
4.3.1 General
Unless stated below, all conditions of the test vehicle shall comply with the requirements specified in
prEN 14363-1:2025, 5.3.
4.3.2 Vehicle test conditions
Single vehicles that are not subject to the influence of adjacent vehicles shall be tested separately without
any inter-vehicle constraints. Where a test on a single vehicle is not possible the influence of inter-vehicle
constraints shall be analysed in order to determine their significance.
Other vehicles such as articulated trains shall be tested with the normal configuration of the connections
to adjacent vehicles.
4.3.3 Load condition
The test vehicle shall comply with the requirements in prEN 14363-1:2025, 5.3.2 or with requirements
specified in EN 15273-2:2013+A1:2016 depending on the aim of the test.
Where test conditions do not allow the defined loading to be achieved it is permitted to simulate the
loaded condition. This load simulation should include, as far as possible, a representation of the position
of the centre of gravity of the loaded vehicle body, including height and offset.
The applied load, including offset of the load and height of centre of gravity above top of rail of the load
shall be documented in the test report.
oSIST prEN 14363-3:2025
prEN 14363-3:2025 (E)
4.3.4 Fault mode conditions
The requirements in prEN 14363-1:2025, 5.2.2 shall form the basis of determining which tests are to be
carried out.
4.4 Method 1: Stationary test
4.4.1 General
The requirements in prEN 14363-1:2025, 5.2.2 shall form the basis of determining which tests are to be
carried out.
4.4.2 Vehicles with air springs
The effect of the air spring levelling system’s response time shall be investigated. If the response time of
the levelling system affects body roll of the vehicle during the test, then the levelling valves shall be
disconnected such that the air springs act as passive elements.
4.4.3 Test site
The test shall be carried out at a measurement place consisting of track that is level in both the
longitudinal and transverse planes with provision to apply the inclination accurately. It shall be possible
to incline the plane of all wheelsets in both directions to simulate cant excess and cant deficiency at all
positions of the vehicle. The inclination of the wheelsets shall be applied simultaneously in steps to the
maximum value.
The maximum applied test cant shall be sufficient to represent the forces arising from steady-state cant
deficiency or excess.
The load path through the suspension shall be consistent with that experienced by the vehicle in
operation.
4.4.4 Measured and derived quantities
Vertical deflections or angles of the vehicle body and one wheelset shall be measured on marked points
in such a way that it is possible to derive:
— η roll angle of the wheelsets relative to the un-canted track plane (cant angle);
+ 0
— η bogie roll angle relative to η ;
— η* vehicle body roll angle relative to η ;
— s = η*/η flexibility coefficient;
Depending on the gauging method (see EN 15273-2:2013+A1:2016) additional quantities shall be
measured:
+
— Δy lateral movement of the bogie at a defined point relative to the perpendicular axis of the wheelset;
— Δy* lateral movement in the secondary suspension;
— y* lateral movement of the vehicle body at a defined point P relative to the perpendicular axis of the
wheelsets;
— h the height above the running plane of a defined point P in the longitudinal centre plane of the
P
vehicle.
oSIST prEN 14363-3:2025
prEN 14363-3:2025 (E)
Figure 1 shows the condition represented by the test. At each value of cant – from maximum negative to
maximum positive value – measured values and derived values shall be measured and evaluated.

Figure 1 — Standing vehicle on canted track (example of vehicle without bogies)
4.4.5 Data for evaluation of flexibility coefficient (for Defined Gauging)
For evaluation of the flexibility coefficient (as defined in EN 15273-1:2013+A1:2016) diagrams shall be
0 0
produced showing η* = f (η ) and y* = f (η ), if measured. To enable unambiguous evaluation of the
flexibility coefficient the tests shall be carried out for positive and negative cant, the maximum (positive
and negative) test cant shall be at least 10 % higher than the specified maximum operating cant deficiency
or cant excess. The results shall be plotted. Generally, this takes the form of a hysteresis loop. A sufficient
set of data shall be recorded to achieve a closed loop.
Figure 2 shows an example of a diagram η* = f (η ).
NOTE The crosses in the diagram indicate the measured values at different cant angles. It shows a hysteresis
of the measured roll angles which is
...