SIST-TP CEN/TR 15068:2009

Gas welding equipment - Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering - Measurement method

This document specifies a test method for measuring the noise emitted by manual blowpipes according to EN ISO 5172 used for welding, cutting and allied processes.
This test method is used only for comparative purposes between manual blowpipes when tested under nominal conditions under clause 5.

Gasschweißgeräte - Messungen für von Brennern für Schweißen, Schneiden, Wärmen, Hartlöten und Weichlöten erzeugte Geräusche - Messverfahren

Matériel de soudage aux gaz - Mesurage du bruit émis par les chalumeaux destinés au soudage, brasage, coupage et chauffage - Méthode de mesurage

Le présent document spécifie une méthode d’essai pour le mesurage du bruit émis par les chalumeaux
manuels conformes à l’EN ISO 5172, utilisés pour le soudage, le coupage et techniques connexes.
Cette méthode d’essai n’est utilisée qu’à des fins de comparaison entre les chalumeaux manuels soumis aux
essais dans les conditions nominales de l’article 5.

Oprema za plamensko varjenje - Merjenje hrupa, ki ga oddaja gorilnik za varjenje, rezanje, segrevanje, trdo in mehko spajkanje - Merilna metoda

General Information

• Status: Published
• Publication Date: 03-May-2009
• ICS: 17.140.20 - Noise emitted by machines and equipment
• ICS: 25.160.30 - Welding equipment
• Technical Committee: VAR - Welding
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 17-Apr-2009
• Due Date: 22-Jun-2009
• Completion Date: 04-May-2009
• Ref Project: CEN/TR 15068:2009 - Gas welding equipment - Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering - Measurement method

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN/TR 15068:2009
01-junij-2009
Oprema za plamensko varjenje - Merjenje hrupa, ki ga oddaja gorilnik za varjenje,
rezanje, segrevanje, trdo in mehko spajkanje - Merilna metoda
Gas welding equipment - Measurement of noise emitted by blowpipe for welding, cutting,
heating, brazing and soldering - Measurement method
Gasschweißgeräte - Messungen für von Brennern für Schweißen, Schneiden, Wärmen,
Hartlöten und Weichlöten erzeugte Geräusche - Messverfahren
Matériel de soudage aux gaz - Mesurage du bruit émis par les chalumeaux destinés au
soudage, brasage, coupage et chauffage - Méthode de mesurage
Ta slovenski standard je istoveten z: CEN/TR 15068:2009
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
25.160.30 Varilna oprema Welding equipment
SIST-TP CEN/TR 15068:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN/TR 15068:2009

---------------------- Page: 2 ----------------------

SIST-TP CEN/TR 15068:2009
TECHNICAL REPORT
CEN/TR 15068
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
March 2009
ICS 25.160.30
English Version
Gas welding equipment - Measurement of noise emitted by
blowpipe for welding, cutting, heating, brazing and soldering -
Measurement method
Matériel de soudage aux gaz - Mesurage du bruit émis par Gasschweißgeräte - Messungen für von Brennern für
les chalumeaux destinés au soudage, brasage, coupage et Schweißen, Schneiden, Wärmen, Hartlöten und Weichlöten
chauffage - Méthode de mesurage erzeugte Geräusche - Messverfahren
This Technical Report was approved by CEN on 17 February 2009. It has been drawn up by the Technical Committee CEN/TC 121.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 15068:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN/TR 15068:2009
CEN/TR 15068:2009 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Measurement conditions .4
5 Procedure .6
6 Test results .6
7 Test report .6

2

---------------------- Page: 4 ----------------------

SIST-TP CEN/TR 15068:2009
CEN/TR 15068:2009 (E)
Foreword
This document (CEN/TR 15068:2009) has been prepared by Technical Committee CEN/TC 121 “Welding”,
the secretariat of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
3

---------------------- Page: 5 ----------------------

SIST-TP CEN/TR 15068:2009
CEN/TR 15068:2009 (E)
1 Scope
This Technical Report specifies a test method for measuring the noise emitted by manual blowpipes according
to EN ISO 5172 used for welding, cutting and allied processes.
This test method is used only for comparative purposes between manual blowpipes when tested under
nominal conditions under clause 5.
2 Normative references
The following referenced documents are indispensable for the application
...