SIST EN ISO 9444-2:2011
(Main)Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009)
Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009)
This part of ISO 9444 specifies the tolerances on dimensions and form for continuously hot-rolled stainless steel wide strip in actual widths from 600 mm to 2500 mm and for sheet/plate cut from such strip.
Kontinuierlich warmgewalzter nichtrostender Stahl - Grenzabmaße und Formtoleranzen - Teil 2: Warmbreitband und Blech (ISO 9444-2:2009)
Dieser Teil der ISO 9444 Norm legt die Grenzabmaße und Formtoleranzen fest für kontinuierlich warmgewalztes Warmbreitband aus nichtrostenden Stählen, in Walzbreiten von 600 mm bis 2500 mm. Sie gilt auch für Blech hergestellt aus diesem Erzeugnis, allgemein bekannt als Bandblech.
Acier inoxydable laminé à chaud en continu - Tolérances sur les dimensions et la forme - Partie 2: Larges bandes et tôles (ISO 9444-2:2009)
L'ISO 9444-2:2009 spécifie les tolérances sur les dimensions et la forme pour les larges bandes en acier inoxydable laminées à chaud en continu, en largeurs réelles de 600 mm à 2 500 mm et pour les tôles découpées dans de telles bandes.
Kontinuirno vroče valjana nerjavna jekla - Mejni odstopki mer in tolerance oblik - 2. del: Široki trakovi ter tanke in debele pločevine (ISO 9444-2:2009)
Ta del ISO 9444 določa mejne odstopke mer in oblik za široke trakove iz kontinuirnega vroče valjanega nerjavnega jekla dejanske širine med 600 mm in 2500 mm ter za tanko in debelo pločevino, rezano iz takega traku.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9444-2:2011
01-oktober-2011
.RQWLQXLUQRYURþHYDOMDQDQHUMDYQDMHNOD0HMQLRGVWRSNLPHULQWROHUDQFHREOLN
GHO âLURNLWUDNRYLWHUWDQNHLQGHEHOHSORþHYLQH ,62
Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2:
Wide strip and sheet/plate (ISO 9444-2:2009)
Kontinuierlich warmgewalzter nichtrostender Stahl - Grenzabmaße und Formtoleranzen -
Teil 2: Warmbreitband und Blech (ISO 9444-2:2009)
Acier inoxydable laminé à chaud en continu - Tolérances sur les dimensions et la forme -
Partie 2: Larges bandes et tôles (ISO 9444-2:2009)
Ta slovenski standard je istoveten z: EN ISO 9444-2:2010
ICS:
77.140.20 Visokokakovostna jekla Stainless steels
77.140.50 3ORãþDWLMHNOHQLL]GHONLLQ Flat steel products and semi-
SROL]GHONL products
SIST EN ISO 9444-2:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9444-2:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 9444-2:2011
EUROPEAN STANDARD
EN ISO 9444-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2010
ICS 77.140.20; 77.140.50
English Version
Continuously hot-rolled stainless steel - Tolerances on
dimensions and form - Part 2: Wide strip and sheet/plate (ISO
9444-2:2009)
Acier inoxydable laminé à chaud en continu - Tolérances Kontinuierlich warmgewalzter nichtrostender Stahl -
sur les dimensions et la forme - Partie 2: Larges bandes et Grenzabmaße und Formtoleranzen - Teil 2: Warmbreitband
tôles (ISO 9444-2:2009) und Blech (ISO 9444-2:2009)
This European Standard was approved by CEN on 20 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9444-2:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9444-2:2011
EN ISO 9444-2:2010 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9444-2:2011
EN ISO 9444-2:2010 (E)
Foreword
The text of ISO 9444-2:2009 has been prepared by Technical Committee ISO/TC 17 “Steel” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 9444-2:2010 by
Technical Committee ECISS/TC 105 “Steels for heat treatment, alloy steels, free-cutting steels and stainless
steels” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn
at the latest by December 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 9444-2:2009 has been approved by CEN as a EN ISO 9444-2:2010 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 9444-2:2011
---------------------- Page: 6 ----------------------
SIST EN ISO 9444-2:2011
INTERNATIONAL ISO
STANDARD 9444-2
First edition
2009-06-01
Continuously hot-rolled stainless steel —
Tolerances on dimensions and form —
Part 2:
Wide strip and sheet/plate
Acier inoxydable laminé à chaud en continu — Tolérances sur les
dimensions et la forme —
Partie 2: Larges bandes et tôles
Reference number
ISO 9444-2:2009(E)
©
ISO 2009
---------------------- Page: 7 ----------------------
SIST EN ISO 9444-2:2011
ISO 9444-2:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 9444-2:2011
ISO 9444-2:2009(E)
Contents Page
Foreword. iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 1
4 Information to be supplied by the purchaser . 2
5 Type of delivery and delivery condition . 3
6 Tolerances on thickness for hot-rolled wide strip and sheet/plate . 3
7 Tolerances on width for hot-rolled wide strip and sheet/plate . 4
8 Tolerances on length for sheet/plate. 4
9 Tolerances on edge camber for hot-rolled wide strip and sheet/plate . 5
10 Tolerances on squareness for sheet/plate. 5
11 Tolerances on flatness for sheet/plate . 5
12 Form of coils . 5
13 Ordered format for sheet/plate . 5
14 Measurement of thickness for hot-rolled wide strip and sheet/plate. 6
15 Measurement of width. 6
16 Measurement of length. 6
17 Measurement of edge camber . 6
18 Measurement of squareness . 7
19 Measurement of flatness. 7
Bibliography . 8
© ISO 2009 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 9444-2:2011
ISO 9444-2:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 9444-2 was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 4, Heat treatable and
alloy steels.
This first edition of ISO 9444-2 cancels and replaces the second edition of ISO 9444:2002, the contents of
which has been technically revised and separated into two parts.
ISO 9444 consists of the following parts, under the general title Continuously hot-rolled stainless steel —
Tolerances on dimensions and form:
⎯ Part 1: Narrow strip and cut lengths
⎯ Part 2: Wide strip and sheet/plate
iv © ISO 2009 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 9444-2:2011
INTERNATIONAL STANDARD ISO 9444-2:2009(E)
Continuously hot-rolled stainless steel — Tolerances on
dimensions and form —
Part 2:
Wide strip and sheet/plate
1 Scope
This part of ISO 9444 specifies the tolerances on dimensions and form for continuously hot-rolled stainless
steel wide strip in actual widths from 600 mm to 2 500 mm and for sheet/plate cut from such strip.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 6929:1987, Steel products — Definitions and classification
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 6929 and the following apply.
3.1
hot-rolled sheet/plate
flat rolled product,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.