SIST EN 10149-1:1997
(Main)Hot-rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions
Hot-rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions
1.1 This European Standard specifies requirements for flat products made of weldable, hot-rolled, hith yield strength alloy quality and special steels for cold forming. Part 1 of this European Standard specifies the general delivery conditions. Part 2 of this European Standard specifies the delivery conditions for thermomechanically rolled steels in the grades given in table I (chemical composition) and table 2 (mechanical properties) of Part 2. Part 3 of this European Standard specifies the delivery conditions for normalized or normalized rolled steels in the grades given in table 1 (chemical composition) and table 2 (mechanical properties) of Part 3. The steels specified in Part 2 and 3 of this European Standard are applicable to hot-rolled flat products in the thickness range of 1,5 mm to 20 mm for the steels with Reh ? 460 N/mm2 and 1,5 mm to 16 mm for the steels with higher minimum yield strength. 1.2 This European Standard does not apply to products for pressure vessels and products for which other EURONORMS exist or European Standards dealing with steels for general structural applications are being prepared: - Hot-rolled products of non-alloy structural steels - (see EN 10025). - Semi-finished products for forging in general purpose structural steel - (see EURONORM 30). - Weldable fine grain structural steels - (see EN 10113 Parts 1 - 3). - Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened condition -(see EN 10137 Parts 1 - 3) - Structural steels with improved atmospheric corrosion resistance -(see EN 10155) - Steels for shipbuilding - normal and high strength qualities - (see EURONORM 156) - Hot finished structural hollow sections (see EN 10210-1).
Warmgewalzte Flacherzeugnisse aus Stählen mit hoher Streckgrenze zum Kaltumformen - Teil 1: Allgemeine Lieferbedingungen
Diese Europäische Norm enthält die Anforderungen an Flacherzeugnisse aus warmgewalzten oder kaltgewalzten schweißbaren legierten Qualitäts- und Edelstählen mit hoher Streckgrenze, die für die Kaltumformung bestimmt sind. Teil 1 dieser Europäischen Norm enthält die allgemeinen Lieferbedingungen. Teil 2 dieser Europäischen Norm enthält die Lieferbedingungen für thermomechanisch gewalzte Stähle der Sorten nach Tabelle 1 (chemische Zusammensetzung) sowie nach Tabelle 2 (mechanische Eigenschaften) des Teils 2.
Produits plats laminés a chaud en aciers a haute limite d'élasticité pour formage a froid - Partie 1: Conditions générales de livraison
La présente norme européenne spécifie les exigences pour les produits plats laminés a chaud en aciers spéciaux et de qualité alliés, a haute limite d'élasticité, soudables, pour formage a froid. La partie 1 de la présente norme spécifie les conditions générales de livraison. La partie 2 de laprésente norme européenne spécifie les conditions de livraison des aciers obtenus par laminage thermomécanique dans les nuances données au tableau 1 (composition chimique) et au tableau 2 (caractéristiques mécaniques) de la partie 2.
Vroče valjani ploščati izdelki iz jekel z veliko napetostjo tečenja za preoblikovanje v hladnem - 1. del: Splošni dobavni pogoji
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Warmgewalzte Flacherzeugnisse aus Stählen mit hoher Streckgrenze zum Kaltumformen - Teil 1: Allgemeine LieferbedingungenProduits plats laminés a chaud en aciers a haute limite d'élasticité pour formage a froid - Partie 1: Conditions générales de livraisonHot-rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions77.140.50SROL]GHONLFlat steel products and semi-products77.140.10Jekla za toplotno obdelavoHeat-treatable steelsICS:Ta slov
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.