oSIST prEN ISO 16965:2024
(Main)Environmental solid matrices - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS) (ISO/DIS 16965:2024)
Environmental solid matrices - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS) (ISO/DIS 16965:2024)
This document specifies a method for the determination of the following elements in aqua regia, nitric acid or mixture of hydrochloric (HCl), nitric (HNO3) and tetrafluoroboric (HBF4)/hydrofluoric (HF) acid digests of soil, treated biowaste, waste, sludge and sediment using inductively coupled plasma mass spectrometry (ICP-MS):
Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), cerium (Ce), cesium (Cs), chromium (Cr), cobalt (Co), copper (Cu), dysprosium (Dy), erbium (Er), europium (Eu), gadolinium (Gd), gallium (Ga), germanium (Ge), gold (Au), hafnium (Hf), holmium (Ho), indium (In), iridium (Ir), iron (Fe), lanthanum (La), lead (Pb), lithium (Li), lutetium (Lu), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), neodymium (Nd), nickel (Ni), palladium (Pd), phosphorus (P), platinum (Pt), potassium (K), praseodymium (Pr), rhenium (Re), rhodium (Rh), rubidium (Rb), ruthenium (Ru), samarium (Sm), scandium (Sc), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), tellurium (Te), terbium (Tb), thallium (Tl), thorium (Th), thulium (Tm), tin (Sn), titanium (Ti), tungsten (W), uranium (U), vanadium (V), ytterbium (Yb), yttrium (Y), zinc (Zn), and zirconium (Zr).
The working range depends on the matrix and the interferences encountered.
The method detection limit of the method is between 0,1 mg/kg dry matter and 2,0 mg/kg dry matter for most elements. The limit of detection will be higher in cases where the determination is likely to be interfered or in case of memory effects
Feststoffe in der Umwelt - Bestimmung von Elementen mittels Massenspektrometrie mit induktiv gekoppeltem Plasma (ICP-MS) (ISO/DIS 16965:2024)
Matrices solides environnementales - Détermination des éléments par spectrométrie de masse avec plasma induit par haute fréquence (ICP-MS) (ISO/DIS 16965:2024)
Trdni matriksi v okolju - Določanje elementov z masno spektrometrijo z induktivno sklopljeno plazmo (ICP-MS) (ISO/DIS 16965:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Trdni matriksi v okolju - Določanje elementov z masno spektrometrijo z induktivno
sklopljeno plazmo (ICP-MS) (ISO/DIS 16965:2024)
Environmental solid matrices - Determination of elements using inductively coupled
plasma mass spectrometry (ICP-MS) (ISO/DIS 16965:2024)
Feststoffe in der Umwelt - Bestimmung von Elementen mittels Massenspektrometrie mit
induktiv gekoppeltem Plasma (ICP-MS) (ISO/DIS 16965:2024)
Matrices solides environnementales - Détermination des éléments par spectrométrie de
masse avec plasma induit par haute fréquence (ICP-MS) (ISO/DIS 16965:2024)
Ta slovenski standard je istoveten z: prEN ISO 16965
ICS:
13.030.20 Tekoči odpadki. Blato Liquid wastes. Sludge
13.080.10 Kemijske značilnosti tal Chemical characteristics of
soils
71.040.50 Fizikalnokemijske analitske Physicochemical methods of
metode analysis
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 16965
ISO/TC 190/SC 3
Environmental solid matrices —
Secretariat: DIN
Determination of elements using
Voting begins on:
inductively coupled plasma mass
2024-07-09
spectrometry (ICP-MS)
Voting terminates on:
ICS: 13.030.01; 13.080.10
2024-10-01
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 16965:2024(en)
DRAFT
ISO/DIS 16965:2024(en)
International
Standard
ISO/DIS 16965
ISO/TC 190/SC 3
Environmental solid matrices —
Secretariat: DIN
Determination of elements using
Voting begins on:
inductively coupled plasma mass
spectrometry (ICP-MS)
Voting terminates on:
ICS: 13.030.01; 13.080.10
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 16965:2024(en)
ii
ISO/DIS 16965:2024(en)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Principle . 2
4 Interferences . 2
4.1 General .2
4.2 Spectral interferences .2
4.2.1 Isobaric elemental interferences .2
4.2.2 Isobaric molecular and doubly-charged ion interferences .2
4.2.3 Non-spectral interferences .3
5 Reagents . 3
6 Apparatus . 6
7 Procedure . 7
7.1 Test sample solution .7
7.2 Test solution .7
7.3 Instrument set-up .7
7.4 Calibration .7
7.4.1 Linear calibration function .7
7.4.2 Standard addition calibration .8
7.4.3 Determination of correction factors .8
7.4.4 Variable isotope ratio .8
7.5 Sample measurement .8
8 Calculation . 9
9 Expression of results . 9
10 Performance characteristics . 9
10.1 Blank .9
10.2 Calibration check .10
10.3 Internal standard response .10
10.4 Interference .10
10.5 Recovery .10
10.6 Performance data .10
11 Test report . 10
Annex A (informative) Repeatability and reproducibility data .12
Annex B (informative) Selected isotopes and spectral interferences for quadrupole ICP-MS
instruments .18
Bibliography . 19
iii
ISO/DIS 16965:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee SC 3, Chemical
and physical characterization.
This second edition cancels and replaces the first edition (ISO/TS 16965:2013), which has been technically
revised.
The main changes compared to the previous edition are as follows :
— The contents of ISO/TS 16965 and EN 16171 have been merged;
— The scope has been widened to include treated biowaste, waste, sludge and sediment;
— The document has been developed parallel with CEN according to the Vienna Agreement;
— validation data has been added:
— repeatability and reproducibility data have been added from a European interlaboratory comparison
organized by the German Federal Institute for Materials Research and Testing BAM in 2013 (see Annex A).
— repeatability and re
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.