SIST EN 13232-7:2023
(Main)Railway applications - Track - Switches and crossings for Vignole rails - Part 7: Crossings with moveable parts
Railway applications - Track - Switches and crossings for Vignole rails - Part 7: Crossings with moveable parts
The scope of this part is:
- to establish a working terminology for crossings with moveable parts, which means crossings with moveable parts to close the gap of the running edge, and their constituent parts, and identify the main types;
- to list the minimum informative requirements for the manufacture of crossings with moveable parts and/or their constituent parts;
- to formulate codes of practice for inspection and tolerances for crossings with moveable parts and/or their constituent parts;
- to establish the limits and extent of supply;
- to list the method by which crossings with moveable parts and their constructional parts should be identified and traced;
- to list the different and varying ways by which crossings with moveable parts can be described, using the following parameters:
- geometry of crossings;
- types of construction;
- performance requirements;
- design criteria;
- tolerances and inspection.
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 7: Herzstücke mit beweglichen Bauteilen
Dieses Dokument
— legt Fachbegriffe für Herzstücke mit beweglichen Bauteilen fest, das heißt, Herzstücke mit beweglichen Bauteilen, die die (führungslose) Lücke der Fahrkante zwischen den einzelnen Bauteilen schließen, und die wesentlichen Bauarten zu bezeichnen,
— führt die Mindestanforderungen an die Herstellung von Herzstücken mit beweglichen und/oder ihren einzelnen Bauteilen auf,
— legt Verfahrensweisen und Vorschriften für die Abnahme und die Grenzabweichungen für Herzstücke mit beweglichen Bauteilen und/oder ihre einzelnen Bauteile fest,
— legt Liefergrenzen und -umfang fest,
— führt das Verfahren auf, nach welchem Herzstücke mit beweglichen Bauteilen und/oder ihre einzelnen Bauteile gekennzeichnet werden sollten, und
— listet die unterschiedlichen Wege und Möglichkeiten auf, nach denen Herzstücke mit beweglichen Bauteilen beschrieben werden können, unter Verwendung der nachfolgenden Parameter:
— Geometrie der Herzstücke;
— Bauarten der Herzstücke;
— Leistungsanforderungen;
— Konstruktions-Kriterien;
— Grenzabweichungen und Abnahme.
Applications ferroviaires - Infrastructure - Appareils de voie - Partie 7: Curs à parties mobiles
Le présent document :
— établit une terminologie pour les cœurs à parties mobiles, ce qui englobe les cœurs comprenant des parties mobiles destinées à combler la lacune de la file directrice et leurs constituants, et identifie les principaux types ;
— spécifie les exigences minimales pour la fabrication des cœurs à parties mobiles et/ou de leurs constituants ;
— spécifie les codes d'usage pour les contrôles en usine ainsi que les tolérances pour les cœurs à parties mobiles et/ou leurs constituants ;
— établit les limites de fourniture ;
— répertorie les méthodes d'identification des cœurs à parties mobiles et de leurs constituants qu'il convient d'utiliser ;
— spécifie les différents moyens de décrire les cœurs à parties mobiles à l'aide des paramètres suivants :
— géométrie des cœurs ;
— types de construction ;
— exigences de performance ;
— critères de conception ;
— tolérances et inspection.
Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice - 7. del: Kretniška srca s premičnimi deli
Področje uporabe tega dela standarda vključuje:
– vzpostavitev delovne terminologije za kretniška srca s premičnimi deli (tj. kretniška srca s premičnimi deli za zapolnitev vrzeli voznih robov) in njihove sestavne dele ter opredelitev glavnih vrst;
– navedbo informativnih zahtev za izdelavo kretniških src s premičnimi deli in/ali njihovih sestavnih delov;
– oblikovanje pravil ravnanja v zvezi s pregledom in določitev toleranc za kretniška srca s premičnimi deli in/ali njihove sestavne dele;
– vzpostavitev omejitev in obsega dobave;
– navedbo metode, ki naj se uporabi za opredelitev in sledenje kretniškim srcem s premičnimi deli in njihovim sestavnim delom;
– navedbo različnih načinov, s katerimi je mogoče opisati kretniška srca s premičnimi deli z uporabo teh parametrov:
– geometrijo kretniških src;
– vrste konstrukcije;
– zahteve glede zmogljivosti;
– merila za projektiranje;
– tolerance in pregled.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13232-7:2023
01-december-2023
Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice
- 7. del: Kretniška srca s premičnimi deli
Railway applications - Track - Switches and crossings for Vignole rails - Part 7:
Crossings with moveable parts
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 7:
Herzstücke mit beweglichen Bauteilen
Applications ferroviaires - Infrastructure - Appareils de voie - Partie 7: Curs à parties
mobiles
Ta slovenski standard je istoveten z: EN 13232-7:2023
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
SIST EN 13232-7:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13232-7:2023
---------------------- Page: 2 ----------------------
SIST EN 13232-7:2023
EN 13232-7
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 93.100 Supersedes EN 13232-7:2006+A1:2011
English Version
Railway applications - Track - Switches and crossings for
Vignole rails - Part 7: Crossings with moveable parts
Applications ferroviaires - Voie - Appareils de voie Bahnanwendungen - Oberbau - Weichen und
pour rails Vignole - Partie 7 : Cœurs à parties mobiles Kreuzungen für Vignolschienen - Teil 7: Herzstücke mit
beweglichen Bauteilen
This European Standard was approved by CEN on 23 October 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13232-7:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13232-7:2023
EN 13232-7:2023 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 8
3.1 Common crossing with moveable point . 9
3.2 Common crossing with moveable wing rails . 15
3.3 Obtuse crossing with moveable parts . 18
4 Performance requirements . 23
4.1 Common crossings with moveable parts . 23
4.2 Obtuse crossings with moveable parts . 24
4.3 Materials . 25
4.4 Geometry .
...
SLOVENSKI STANDARD
oSIST prEN 13232-7:2020
01-marec-2020
Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice
- 7. del: Kretniška srca s premičnimi deli
Railway applications - Track - Switches and crossings for Vignole rails - Part 7:
Crossings with moveable parts
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 7:
Herzstücke mit beweglichen Bauteilen
Applications ferroviaires - Infrastructure - Appareils de voie - Partie 7: Curs à parties
mobiles
Ta slovenski standard je istoveten z: prEN 13232-7
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
oSIST prEN 13232-7:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13232-7:2020
---------------------- Page: 2 ----------------------
oSIST prEN 13232-7:2020
DRAFT
EUROPEAN STANDARD
prEN 13232-7
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2020
ICS 93.100 Will supersede EN 13232-7:2006+A1:2011
English Version
Railway applications - Track - Switches and crossings for
Vignole rails - Part 7: Crossings with moveable parts
Applications ferroviaires - Infrastructure - Appareils de Bahnanwendungen - Oberbau - Weichen und
voie - Partie 7: C¿urs à parties mobiles Kreuzungen für Vignolschienen - Teil 7: Herzstücke mit
beweglichen Bauteilen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13232-7:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13232-7:2020
prEN 13232-7:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
3.1 General . 6
3.2 Common crossing with moveable point (Figure 7) . 6
3.3 Common crossing with moveable wing rails (Figure 8) . 8
3.4 Obtuse crossing with moveable parts (Figures 9 and 10) . 9
4 Performance requirements . 11
4.1 Common crossings with moveable parts .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.