SIST EN 13232-3:2023
(Main)Railway applications - Track - Switches and crossings for Vignole rails - Part 3: Requirements for wheel/rail interaction
Railway applications - Track - Switches and crossings for Vignole rails - Part 3: Requirements for wheel/rail interaction
This part of this European Standard specifies:
- characterisation of wheel and track dimensions;
- geometric design principles for wheel guidance;
- design principles for wheel load transfer;
- deciding whether movable crossings are needed.
These are illustrated by their application to turnout components:
- switches;
- crossings;
- check rails.
but the principles apply equally to more complex layouts.
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 3: Anforderungen an das Zusammenspiel Rad/Schiene
Dieses Dokument legt die Hauptkriterien des Zusammenspiels Rad/Schiene fest, die während der Phase des geometrischen Entwurfs von Gleisanlagen mit Eisenbahn-Weichen und Kreuzungen zu berücksichtigen sind.
Es legt Folgendes fest:
— die Beschreibung der Rad und Gleisabmessungen;
— die geometrischen Entwurfsgrundsätze für die Radführung;
— Entwurfsgrundsätze für die Radlastübertragung;
— ob Herzstücke mit beweglichen Bauteilen erforderlich sind.
Diese werden entsprechend ihrer Anwendung auf die Weichenbauteile
— Zungenvorrichtungen;
— Herzstücke;
— Radlenker;
dargestellt, jedoch sind die Grundsätze gleichermaßen auch auf umfangreichere Gleiseinheiten anwendbar. Es gibt auch vereinfachte Definitionen der Sicherheits- und Funktionsmaße, die in Verbindung mit den allgemeinen Grundsätzen als Grundlage für eine tiefergehende Bewertung angewendet werden können.
Applications ferroviaires - Infrastructure - Appareils de voie - Partie 3: Exigences pour l'interaction Roue/Rail
Le présent document définit les principaux critères concernant l'interaction roue/voie à prendre en compte lors de la conception géométrique des appareils de voie ferroviaires.
Il spécifie :
— la caractérisation des dimensions des roues et des voies ;
— les principes de conception géométrique pour le guidage des roues ;
— les principes de conception pour le transfert de la charge à la roue ;
— la nécessité ou non d'utiliser des cœurs à parties mobiles.
Ces aspects sont représentés en les appliquant aux composants de branchements suivants :
— aiguillages ;
— cœurs ;
— contre-rails.
Toutefois, les principes s'appliquent également aux appareils de voie plus complexes. Des définitions simplifiées relatives aux cotes sécuritaires et fonctionnelles peuvent en outre être utilisées conjointement aux principes généraux, dans le cadre d'une évaluation plus approfondie.
Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice - 3. del: Zahteve na stiku kolo-tirnica
Ta del tega evropskega standarda določa:
– karakterizacijo mer kolesa in tirnice;
– načela geometrijskega projektiranja za usmerjanje koles;
– načela geometrijskega projektiranja za prenos obremenitve koles;
– odločanje o tem, ali so potrebna premična križišča.
To je v tem dokumentu ponazorjeno z uporabo za sestavne dele kretniškega sistema:
– kretnice;
– križišča;
– vodilne tirnice;
vendar se načela prav tako uporabljajo za kompleksnejše postavitve.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13232-3:2023
01-december-2023
Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice
- 3. del: Zahteve na stiku kolo-tirnica
Railway applications - Track - Switches and crossings for Vignole rails - Part 3:
Requirements for wheel/rail interaction
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 3:
Anforderungen an das Zusammenspiel Rad/Schiene
Applications ferroviaires - Infrastructure - Appareils de voie - Partie 3: Exigences pour
l'interaction Roue/Rail
Ta slovenski standard je istoveten z: EN 13232-3:2023
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
SIST EN 13232-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13232-3:2023
---------------------- Page: 2 ----------------------
SIST EN 13232-3:2023
EN 13232-3
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 93.100 Supersedes EN 13232-3:2003+A1:2011
English Version
Railway applications - Track - Switches and crossings for
Vignole rails - Part 3: Requirements for wheel/rail
interaction
Applications ferroviaires - Voie - Appareils de voie Bahnanwendungen - Oberbau - Weichen und
pour rails Vignole - Partie 3 : Exigences pour Kreuzungen für Vignolschienen - Teil 3: Anforderungen
l'interaction roue/rail an das Zusammenspiel Rad/Schiene
This European Standard was approved by CEN on 23 October 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13232-3:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13232-3:2023
EN 13232-3:2023 (E)
Contents
European foreword .4
1 Scope .6
2 Normative references .6
3 Terms, definitions and symbols .7
4 Inputs . 11
4.1 General . 11
4.2 Wheel and track parameters . 11
4.2.1 Introduction. 11
4.2.2 Wheel profiles . 11
4.2.3 Wheelsets . 12
4.2.4 Rail and track . 12
4.2.5 Tolerances and wear .
...
SLOVENSKI STANDARD
oSIST prEN 13232-3:2020
01-marec-2020
Železniške naprave - Zgornji ustroj proge - Kretnice in križišča za Vignolove tirnice
- 3. del: Zahteve na stiku kolo-tirnica
Railway applications - Track - Switches and crossings for Vignole rails - Part 3:
Requirements for wheel/rail interaction
Bahnanwendungen - Oberbau - Weichen und Kreuzungen für Vignolschienen - Teil 3:
Anforderungen an das Zusammenspiel Rad/Schiene
Applications ferroviaires - Infrastructure - Appareils de voie - Partie 3: Exigences pour
l'interaction Roue/Rail
Ta slovenski standard je istoveten z: prEN 13232-3
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
oSIST prEN 13232-3:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13232-3:2020
---------------------- Page: 2 ----------------------
oSIST prEN 13232-3:2020
DRAFT
EUROPEAN STANDARD
prEN 13232-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2020
ICS 93.100 Will supersede EN 13232-3:2003+A1:2011
English Version
Railway applications - Track - Switches and crossings for
Vignole rails - Part 3: Requirements for wheel/rail
interaction
Applications ferroviaires - Infrastructure - Appareils de Bahnanwendungen - Oberbau - Weichen und
voie - Partie 3: Exigences pour l'interaction Roue/Rail Kreuzungen für Vignolschienen - Teil 3: Anforderungen
an das Zusammenspiel Rad/Schiene
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13232-3:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13232-3:2020
prEN 13232-3:2020 (E)
Contents
European foreword. 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Inputs . 10
4.1 General . 10
4.2 Wheel and track parameters . 10
4.2.1 Introduction . 10
4.2.2 Wheel profiles . 10
4.2.3 Wheelsets .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.