SIST EN 1175-2:1998

Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks

1.1   This standard specifies the electrical and related mechanical safety requirements for the design and construction of the electrical installation in internal combustion engine powered trucks (hereinafter referred to as "trucks") with starter battery nominal voltages up to and including 24 V.  NOTE 1: Part 3 of this standard details specific electrical requirements for electrical power transmission systems of internal combustion engine powered trucks.  NOTE 2: Reference is made to this standard in other standards which cover the non-electrical requirements of the various industrial truck types.    NOTE 3. This standard does not address the subject of electromagnetic compatibility (EMC).        NOTE 4. The special requirements for operation in potentially explosive atmospheres are not covered in this standard.  1.2  The requirements of this standard are applicable, when trucks are operated under the following climatic conditions:     - Maximum ambient temperature, continuous duty: +40oC;    - Lowest ambient temperature: -20 oC;    - Service altitude: up to 2000 m;    - Relative humidity: in the range 30 % to 95 % (non condensing).  1.3  This standard covers specific hazards which could occur during the intended use of trucks. For hazards occurring during construction, transportation, commissioning, de-commissioning and disposal, reference should be made to EN 292.

Sicherheit von Flurförderzeugen - Elektrische Anforderungen für Flurförderzeuge mit Verbrennungsmotoren

Diese Norm schreibt die elektrischen und damit verbundenen mechanischen Sicherheitsanforderungen für die Auslegung und Herstellung der elektrischen Ausrüstung von Flurförderzeugen mit verbrennungsmotorischem Antrieb (im folgenden Flurförderzeuge genannt) mit Starterbatterie-Nennspannungen bis einschließlich 24 V vor.

Sécurité des chariots de manutention - Prescriptions électriques - Partie 2: Prescriptions générales des chariots équipés d'un moteur thermique

La présente norme spécifie les prescriptions de sécurité électriques et les prescriptions mécaniques associées pour la conception et la construction de l'installation électrique des chariots équipés d'un moteur thermique, appelés "Chariots" dans la suite du document, et équipés d'une batterie de démarrage de tensions nominales jusqu'a 24 V inclus.

Varnost vozil za talni transport - Električne zahteve - 2. del: Splošne zahteve za vozila za talni transport z motorjem z notranjim zgorevanjem

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-1998
• Withdrawal Date: 05-May-2011
• ICS: 43.060.01 - Internal combustion engines for road vehicles in general
• ICS: 53.060 - Industrial trucks
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 05-May-2011
• Due Date: 28-May-2011
• Completion Date: 06-May-2011
• Directive: 89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
• Directive: 98/37/EC - Machinery
• Mandate: M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
• Ref Project: EN 1175-2:1998 - Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks

Relations

• Consolidated By: SIST EN 1175-2:1998+A1:2011 - Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 1175-2:1998+A1:2011 - Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
• Effective Date: 19-Jan-2023
• Revised: SIST EN 1175-2:1998/kFprA1:2010 - Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
• Effective Date: 01-Jul-2010
• Replaced By: SIST EN 1175-2:1998+A1:2011 - Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
• Effective Date: 01-Jun-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Flurförderzeugen - Elektrische Anforderungen für Flurförderzeuge mit VerbrennungsmotorenSécurité des chariots de manutention - Prescriptions électriques - Partie 2: Prescriptions générales des chariots équipés d'un moteur thermiqueSafety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks53.060Industrijski tovornjakiIndustrial trucks43.060.01M
...