Steel wire and wire products for fences - Part 7: Steel wire welded panels - For fencing

This Part of this European Standard specifies requirements for steel wire welded mesh panels for fencing. The panels are used for fencing parks, schools, sport stadia, public buildings, factories, airports, military sites, etc. This standard specifies the general characteristics of welded mesh supplied as panels and recommended coatings, properties and tolerances.

Stahldraht und Drahterzeugnisse für Zaüne - Teil 7 : Geschweisste Paneele für Zaüne

Dieser Teil dieser Europäischen Norm legt die Anforderungen für geschweißte Paneele für Zäune fest. Die Paneele finden Einsatz bei der Umzäumung von Parkanlagen, Schulen, Sportstadien, öffentlichen Gebäuden, Fabriken, Flughäfen, militärischen Einrichtungen usw.
Diese Europäische Norm legt die allgemeinen Eigenschaften von geschweißten Gittern, die als Paneele geliefert werden, sowie die empfohlenen Beschichtungen, Eigenschaften und Toleranzen fest. Sie gilt für Paneele aus Rund- oder Formdrähten, die nicht dicker als 10 mm sind.
Die Paneele bestehen aus Drähten mit rundem, rechteckigem oder dreieckigem Querschnitt, doppelten Spanndrähten und dürfen Querdrähte mit dreieckigem Querschnitt haben.

Fils et produits tréfilés en acier pour clôtures - Partie 7 : Panneaux en acier soudés - Pour clôturage

La présente partie de cette Norme européenne spécifie les exigences relatives aux panneaux grillagés en acier soudés destinés au clôturage. Les panneaux sont utilisés pour clôturer des parcs, des écoles, des stades de sport, des bâtiments publics, des usines, des aéroports, des sites militaires, etc..
La présente norme spécifie les caractéristiques générales du grillage soudé livré en panneaux, ainsi que les revetements, caractéristiques et tolérances recommandés. Elle ne couvre que les panneaux fabriqués a partir de fils ronds ou profilés de diametre ou épaisseur inférieur ou égal a 10 mm.
Les panneaux ont des fils ronds, rectangulaires ou triangulaires, des fils doubles horizontaux et peuvent ou ne pas avoir des fils verticaux formés en V.

Jeklena žica in žični izdelki za ograje - 7. del: Iz jeklenih žic zvarjene ograjne plošče

General Information

Status
Withdrawn
Publication Date
31-Mar-2003
Withdrawal Date
28-Jan-2013
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
23-Jan-2013
Due Date
15-Feb-2013
Completion Date
29-Jan-2013

RELATIONS

Buy Standard

Standard
SIST EN 10223-7:2003
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SORãþHStahldraht und Drahterzeugnisse für Zaüne - Teil 7 : Geschweisste Paneele für ZaüneFils et produits tréfilés en acier pour clôtures - Partie 7 : Panneaux en acier soudés - Pour clôturageSteel wire and wire products for fences - Part 7: Steel wire welded panels - For fencing91.090Konstrukcije zunaj stavbExternal structures77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chainsICS:Ta slovenski standard je istoveten z:EN 10223-7:2002SIST EN 10223-7:2003en01-april-2003SIST EN 10223-7:2003SLOVENSKI

STANDARD
SIST EN 10223-7:2003

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10223-7September 2002ICS 77.140.65English versionSteel wire and wire products for fences - Part 7: Steel wirewelded panels - For fencingFils et produits tréfilés en acier pour clôtures - Partie 7 :Panneaux en acier soudés - Pour clôturageStahldraht und Drahterzeugnisse für Zaüne - Teil 7 :Geschweisste Paneele für ZaüneThis European Standard was approved by CEN on 1 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36

B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10223-7:2002 ESIST EN 10223-7:2003

EN 10223-7:2002 (E)2ContentspageForeword......................................................................................................................................................................31Scope..............................................................................................................................................................42Normative references....................................................................................................................................43Terms and definitions....................................................................................................................................54Information to be obtained from the purchaser..........................................................................................65Designation.....................................................................................................................................................66Manufacture....................................................................................................................................................66.1Base metal......................................................................................................................................................66.2Fabrication......................................................................................................................................................67Requirements.................................................................................................................................................77.1Tensile strength.............................................................................................................................................77.2Size tolerances...............................................................................................................................................77.2.1Round wires....................................................................................................................................................77.2.2Other shapes..................................................................................................................................................77.3Mesh dimensions and tolerance..................................................................................................................77.4Coatings..........................................................................................................................................................77.4.1Zinc and zinc alloy coatings.........................................................................................................................77.4.2Organic coating..............................................................................................................................................87.5Weld shear strength......................................................................................................................................87.6Stiffness..........................................................................................................................................................88Sampling.........................................................................................................................................................99Tests on panels..............................................................................................................................................99.1Tensile test.....................................................................................................................................................99.2Wire dimension..............................................................................................................................................99.3Coating tests..................................................................................................................................................99.3.1Zinc or zinc alloy coating of wire before fabrication..................................................................................99.3.2Hot dip zinc or zinc alloy coating by batch process (panels)...................................................................99.3.3Organically coated wire after fabrication....................................................................................................99.4Weld shear strength....................................................................................................................................109.5Stiffness........................................................................................................................................................1010Inspection.....................................................................................................................................................1011Packaging.....................................................................................................................................................10Annex A (normative)

Weld shear strength test method (welded mesh).............................................................11Bibliography..............................................................................................................................................................13SIST EN 10223-7:2003

EN 10223-7:2002 (E)3ForewordThis document EN 10223-7:2002 has been prepared by Technical Committee ECISS/TC 30 "Steel wires", thesecretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by March 2003, and conflicting national standards shall be withdrawn at the latest byMarch 2003.The European Standard comprises the following parts:Part 1: Zinc and zinc alloy coated steel barbed wirePart 2: Hexagonal steel wire netting of agricultural, insulation and fencing purposesPart 3: Hexagonal steel wire netting for engineering purposesPart 4: Steel wire welded mesh fencingPart 5: Steel wire woven hinged joint and knotted mesh fencingPart 6: Steel wire chain link fencingPart 7: Steel wire welded panels - For fencingAnnex A is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 10223-7:2003

EN 10223-7:2002 (E)41 ScopeThis Part of this European Standard specifies requirements for steel wire welded mesh panels for fencing. Thepanels are used for fencing parks, schools, sport stadia, public buildings, factories, airports, military sites, etc.This International Standard specifies the general characteristics of welded mesh supplied as panels andrecommended coatings, properties and tolerances. This International Standard is applicable to panels made fromround or shaped wires not thicker than 10 mm.The panels have round, rectangular or triangular wires and double horizontal wires. The use of V-shaped verticalwires is optional.2 Normative referencesThis European Standard incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 10021, General technical delivery requirements for steel and iron products.EN 10204, Metallic products — Types of inspection documents.EN 10218-1, Steel wire and wire products — General — Part 1: Test methods.EN 10218-2, Steel wire and wire products — General — Part 2: Wire dimensions and tolerances.EN 10244-2:2001, Steel wire and wire products – Non-ferrous metallic coatings on steel wire — Part 2: Zinc andzinc alloy coatings.EN 10245, Steel wire and wire products – Organic coatings on steel wire.EN ISO 1461, Hot dip galvanised coatings on fabricated iron and steel articles – Specifications and test methods(ISO 161:1999).EN ISO 4892-1, Plastics – Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:1999).EN ISO 4892-2, Plastics – Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources (ISO 4892-2:1994).EN ISO 4892-3, Plastics – Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO4892-3:1994).EN ISO 6270-1, Paints and varnishes — Determination of resistance to humidity — Part 1: Continuouscondensation (ISO 6270-1:1998).EN ISO 6988, Metallic and other non-organic coatings — Sulfur dioxide test with general condensation of moisture(I

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.