SIST EN 60598-2-23:1999

Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for filament lamps (IEC 60598-2-23:1996)

Specifies requirements for extra low voltage systems for filament lamps intended for ordinary use on supply voltages not exceeding 1 000 V. The luminaires, being connected in parallel, are supplied via freely suspended continuous supporting conductors or profiles. The current in the output circuit of the system is limited to 25 A.

Leuchten - Teil 2-23: Besondere Anforderungen - Kleinspannungsbeleuchtungssysteme für Glühlampen (IEC 60598-2-23:1996)

Luminaires - Partie 2-23: Règles particulières - Systèmes d'éclairage à très basse tension pour lampes à filament (CEI 60598-2-23:1996)

Spécifie les prescriptions pour les sytèmes d'éclairage à très basse tension pour les lampes à filament, prévues pour utilisation ordinaire en intérieur, avec des tensions d'alimentation ne dépassant pas 1 000 V. Les luminaires,

Svetilke - 2-23. del: Posebne zahteve - Malonapetostni sistemi za razsvetljavo z žarnicami (IEC 60598-2-23:1996)

General Information

• Status: Withdrawn
• Publication Date: 30-Jun-1999
• Withdrawal Date: 29-Jan-2024
• ICS: 29.140.40 - Luminaires
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 30-Jan-2024
• Due Date: 22-Feb-2024
• Completion Date: 30-Jan-2024
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: EN 60598-2-23:1996 - Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for filament lamps

Relations

• Replaced By: SIST EN IEC 60598-2-23:2021 - Luminaires - Part 2-23: Particular requirements - Extra-low-voltage lighting systems for ELV light sources (IEC 60598-2-23:2020)
• Effective Date: 19-Jan-2021
• Amended By: SIST EN 60598-2-23:1999/A1:2002 - Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for filament lamps (IEC 60598-2-23:1996/A1:2000)
• Effective Date: 01-Dec-2002

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60598-2-23:1999
01-julij-1999
Svetilke - 2-23. del: Posebne zahteve - Malonapetostni sistemi za razsvetljavo z
žarnicami (IEC 60598-2-23:1996)
Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for
filament lamps (IEC 60598-2-23:1996)
Leuchten - Teil 2-23: Besondere Anforderungen - Kleinspannungsbeleuchtungssysteme
für Glühlampen (IEC 60598-2-23:1996)
Luminaires - Partie 2-23: Règles particulières - Systèmes d'éclairage à très basse
tension pour lampes à filament (CEI 60598-2-23:1996)
Ta slovenski standard je istoveten z: EN 60598-2-23:1996
ICS:
29.140.40 Svetila Luminaires
SIST EN 60598-2-23:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60598-2-23:1999

---------------------- Page: 2 ----------------------

SIST EN 60598-2-23:1999

---------------------- Page: 3 ----------------------

SIST EN 60598-2-23:1999

---------------------- Page: 4 ----------------------

SIST EN 60598-2-23:1999

---------------------- Page: 5 ----------------------

SIST EN 60598-2-23:1999

---------------------- Page: 6 ----------------------

SIST EN 60598-2-23:1999
CEI
NORME
I EC INTERNATIONALE
598-2-23
INTERNATIONAL
Première édition
STANDARD First edition
1996-04
Luminaires —
Partie 2:
Règles particulières —
Section 23: Systèmes d'éclairage à très basse
tension pour lampes à filament
Luminaires —
Part 2:
Particular requirements —
23: Extra low voltage lighting systems
Section
for filament lamps
Copyright — all rights reserved
Droits de reproduction réservés —
© CEI 1996
No part of this publication may be reproduced or utilized in
Aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun pro- any form or by any means, electronic or mechanical,
cédé, électronique ou mécanique, y compris la photocopie et including photocopying and microfilm, without permission
les microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher.
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission PRICE CODE
Me>tcayuapoa►taa 3newrporexHwvecnaa KoMwccua
I EC
Pour prix, voir catalogue en vigueur
•
•
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 60598-2-23:1999
598-2-23 © IEC:1996 — 3 —
CONTENTS
Page
FOREWORD 5
Clause
23.1 Scope 7
23.2 Normative references 7
23.3 General test requirements 7
Definitions
23.4 9
23.5 Classification 9
23.6 Marking 11
23.7 Construction 11
23.8 Creepage distances and clearances 15
23.9 Provisions for earthing 15
23.10 Terminals and electrical connections 15
23.11 External and internal wiring 15
23.12 Protection against electric shock 17
23.13 Endurance tests and thermal tests 17
23.14 Resistance to dust, solid objects and moisture 17
23.15 Insulation resistance and electric strength 17
23.16 Resistance to heat, fire and tracking 17
Figure 1 — Typical supporting methods for lighting systems 18

---------------------- Page: 8 ----------------------

SIST EN 60598-2-23:1999
598-2-23 © IEC:1996 — 5 —
INTERNATIONAL ELECTROTECHNICAL COMMISSION
LUMINAIRES -
Part 2: Particular requirements -
Section 23: Extra low voltage lighting systems
for filament lamps
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international co-operation on all questions concerning standardization in the electrical and electronic
fields. To this end and in addition to other activities, the IEC publishes International Standards. Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt
with may participate in this preparatory work. International, governmental and non-governmental organizations
liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters, express as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the
form of standards, technical reports or guides and they are accepted by the National Committees in that
sense.
4)
In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transpar
...