SIST EN 1366-10:2011/kprA1:2016
(Amendment)Fire resistance tests for service installations - Part 10: Smoke control dampers
Fire resistance tests for service installations - Part 10: Smoke control dampers
This European Standard specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions.
It needs to be noted that the smoke control damper to be tested may require testing to EN 1366-2 and that this needs to be considered before carrying out these tests.
Smoke control damper tests are required to confirm that the furnace testing requirements of EN 12101-8 are met and EN 12101-8 needs to be considered before carrying out these tests.
Smoke control dampers tested to this European Standard should be classified using EN 13501-4 and this European Standard needs to be considered before carrying out these tests.
To this end this European Standard needs to be read in conjunction with EN 12101-8, EN 13501-4, EN 1366-2 and EN 1363-1, the latter giving further details for fire resistance testing.
Feuerwiderstandsprüfungen für Installationen - Teil 10: Entrauchungsklappen
Essais de résistance au feu des installations techniques - Partie 10: Volets de désenfumage
Preskušanje požarne odpornosti inštalacij - 10. del: Dimoodvodne lopute TC: Dimne lopute
General Information
Relations
Overview
SIST EN 1366-10:2011/kprA1:2016 is a European Standard developed by CEN that specifies fire resistance test methods for smoke control dampers used in service installations. The standard is essential for assessing the performance of smoke control dampers under elevated temperatures and fire conditions to ensure their reliability during fire emergencies. This standard complements related standards like EN 1366-2 and EN 12101-8, defining test procedures, classification, and performance criteria for smoke control dampers in fire-resistant ducts and ventilation systems.
Key Topics
Fire Resistance Testing
EN 1366-10 outlines the required test methods to evaluate smoke control dampers exposed to fire and high temperatures, confirming their integrity and operational functionality under these conditions.Smoke Control Damper Performance
The standard ensures dampers operate to control smoke spread effectively, either by opening or closing in response to fire scenarios, validated through cycling tests simulating real-life flow and pressure conditions.Integration with Other Standards
Compliance with EN 1366-10 must be considered in conjunction with:- EN 1366-2 for general fire resistance testing of service installations
- EN 12101-8 concerning furnace testing requirements for smoke control dampers
- EN 13501-4 for classification of fire resistance on service installations
- EN 1363-1 for additional fire resistance testing specifications
Testing Requirements for Duct Types
The amendment specifies:- Single compartment dampers can be applied to concrete ducts tested under EN 1366-9 with proper classification.
- Multi-compartment dampers may be used with concrete ducts compliant with EN 1366-1 and EN 1366-8, ensuring both are classified according to EN 13501-4.
Cycle Testing Based on Operational Mode
The standard includes guidance on cycle tests:- Dampers opening against flow/pressure must pass cycling tests with loading.
- Dampers that open with or without flow require cycling confirmation without additional loading.
Applications
Building Fire Safety Engineering
EN 1366-10 supports the design, selection, and verification of smoke control dampers in fire safety engineering, helping engineers ensure safe smoke management and compartmentalization in buildings.HVAC and Ventilation Systems
This standard is critical in testing smoke dampers integrated into ventilation ductwork, ensuring that these devices maintain functionality and structural integrity during fires.Compliance and Certification
Manufacturers and testing laboratories use EN 1366-10 to certify that smoke control dampers meet EU regulatory requirements under Regulation 305/2011, facilitating market access and regulatory compliance.Fire Protection Product Development
It aids in the innovation and development of advanced smoke control dampers by defining rigorous test methods that must be met for fire-resistance claims.
Related Standards
- EN 1366-2 - Fire resistance tests for service installations: ventilation ducts
- EN 12101-8 - Smoke and heat control systems - Part 8: Smoke control dampers - Fire resistance test method using a furnace
- EN 13501-4 - Fire classification of construction products and building elements - Classification using data from fire resistance tests on service installations
- EN 1363-1 - Fire resistance tests - Part 1: General requirements
Conclusion
SIST EN 1366-10:2011/kprA1:2016 is a vital standard for professionals involved in fire protection engineering, specifically for testing and classifying smoke control dampers within service installations. By adhering to its test methods and integrating related standards, engineers, manufacturers, and certification bodies can ensure high levels of fire safety and regulatory compliance, enhancing building resilience to fire and effective smoke control strategies.
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1366-10:2011/oprA1:2015
01-januar-2015
Preskušanje požarne odpornosti inštalacij - 10. del: Dimoodvodne lopute
Fire resistance tests for service installations - Part 10: Smoke control dampers
Feuerwiderstandsprüfungen für Installationen - Teil 10: Entrauchungsklappen
Essais de résistance au feu des installations techniques - Partie 10: Volets de
désenfumage
Ta slovenski standard je istoveten z: EN 1366-10:2011/prA1
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
SIST EN 1366-10:2011/oprA1:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 1366-10:2011/oprA1:2015
SIST EN 1366-10:2011/oprA1:2015
EUROPEAN STANDARD
DRAFT
EN 1366-10:2011
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
October 2014
ICS 13.220.50
English Version
Fire resistance tests for service installations - Part 10: Smoke
control dampers
Essais de résistance au feu des installations techniques - Feuerwiderstandsprüfungen für Installationen - Teil 10:
Partie 10: Volets de désenfumage Entrauchungsklappen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 127.
This draft amendment A1, if approved, will modify the European Standard EN 1366-10:2011. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1366-10
...
Frequently Asked Questions
SIST EN 1366-10:2011/kprA1:2016 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Fire resistance tests for service installations - Part 10: Smoke control dampers". This standard covers: This European Standard specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions. It needs to be noted that the smoke control damper to be tested may require testing to EN 1366-2 and that this needs to be considered before carrying out these tests. Smoke control damper tests are required to confirm that the furnace testing requirements of EN 12101-8 are met and EN 12101-8 needs to be considered before carrying out these tests. Smoke control dampers tested to this European Standard should be classified using EN 13501-4 and this European Standard needs to be considered before carrying out these tests. To this end this European Standard needs to be read in conjunction with EN 12101-8, EN 13501-4, EN 1366-2 and EN 1363-1, the latter giving further details for fire resistance testing.
This European Standard specifies test methods for smoke control dampers to assess their performance under elevated temperature or fire conditions. It needs to be noted that the smoke control damper to be tested may require testing to EN 1366-2 and that this needs to be considered before carrying out these tests. Smoke control damper tests are required to confirm that the furnace testing requirements of EN 12101-8 are met and EN 12101-8 needs to be considered before carrying out these tests. Smoke control dampers tested to this European Standard should be classified using EN 13501-4 and this European Standard needs to be considered before carrying out these tests. To this end this European Standard needs to be read in conjunction with EN 12101-8, EN 13501-4, EN 1366-2 and EN 1363-1, the latter giving further details for fire resistance testing.
SIST EN 1366-10:2011/kprA1:2016 is classified under the following ICS (International Classification for Standards) categories: 13.220.50 - Fire-resistance of building materials and elements. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1366-10:2011/kprA1:2016 has the following relationships with other standards: It is inter standard links to SIST EN 1366-10:2011+A1:2017, SIST EN 1366-10:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1366-10:2011/kprA1:2016 is associated with the following European legislation: EU Directives/Regulations: 305/2011; Standardization Mandates: M/117. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 1366-10:2011/kprA1:2016 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...