SIST EN 22872:1998

Packaging - Complete, filled transport packages - Compression test (ISO 2872:1985)

Verpackung - Versandfertige Packstücke - Stauchprüfung (ISO 2872:1985)

Emballages - Emballages d'expédition complets et pleins - Essai de compression (ISO 2872:1985)

Embalaža - Celovita, napolnjena transportna embalaža - Preskus s tlačno obremenitvijo (ISO 2872:1985)

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-1998
• Withdrawal Date: 31-Dec-2001
• ICS: 55.180.40 - Complete, filled transport packages
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Jan-2002
• Due Date: 01-Jan-2002
• Completion Date: 01-Jan-2002
• Directive: 80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
• Directive: 87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
• Ref Project: EN 22872:1992 - Packaging - Complete, filled transport packages - Compression test (ISO 2872:1985)

Relations

• Replaced By: SIST EN ISO 12048:2002 - Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994)
• Effective Date: 01-Jan-2002

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WODþQRVerpackung - Versandfertige Packstücke - Stauchprüfung (ISO 2872:1985)Emballages - Emballages d'expédition complets et pleins - Essai de compression (ISO 2872:1985)Packaging - Complete, filled transport packages - Compression test (ISO 2872:1985)55.180.40Celovita, napolnjena transportna embalažaComplete, filled transport packagesICS:Ta slovenski standard je istoveten z:EN 22872:1992SIST EN 22872:1998en01-oktober-1998SIST EN 22872:1998SLOVENSKI
STANDARD



SIST EN 22872:1998



SIST EN 22872:1998



SIST EN 22872:1998



International Standard @ 2872 INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON~MEWlYHAPO4HAR OPrAHH3AUMR no CTAHLIAPTM3AUMH.ORGANlSATlON INTERNATIONALE DE NORMALISATION 1, Packaging - Complete, filled transport packages - Compression test Emballages - Emballages d'expédition complets et pleins - Essai de compression Second edition - 1985-12-15 I - UDC ô21.798.1 : 620.16ti.7 Ref. No. IS0 2872-1985 (E) s 83 Descriptors : packing, transport packing, complete-and filled packages, tests, compression tests. Cu f2 ii! Price based on 2 pages SIST EN 22872:1998



Foreword IS0 (the International Organization for standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the IS0 Council. They are approved in accordance with IS0 procedures requiring at least 75 % approval by the member bodies voting. International Standard IS0 2872 was prepared by Technical Committee ISO/TC 122, Packaging. This second edition cancels and replaces the first edition (IS0 2872-19731, which has been technically revised as follows : - the specification of the compression tester has been modified slightly (clause 4 "Apparatus"); - a new clause on "Package preparation" has been added. Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated. O International Organization for Standardization, 1985 O Printed in Switzerland SIST EN 22872:1998



INTERNATIONAL STANDARD IS0 2872-1985 (E) Packaging - Complete, filled transport packages - Compression test 1 This International Standard specifies two methods for testing complete, filled transport packages for compression resistance. The test may be used to assess the performance of a package in terms of its strength or of the protection it offers to its contents when it is subjected to compressive forces. It may be per- formed either as a single test to investigate the effects (defor- mation, collapse or failure) of compression or as part of a se- quence of tests designed to’measure the ability of a package to withstand a distribution system that includes a compression hazard. Scope and field of application NOTE - A test method using a compression tester to determine the stacking resistance of a package is given in IS0 2874. 2 References IS0 2206, Packaging - Complete, filled transport packages - Identification of parts when testing. IS0 2233, Packaging - Complete, filled transport packages - Conditioning for testing. IS0 2874, Packaging - Complete, filled transport packages - Stacking test using compression tester. 3 Principle Placing of the test package between the platens of a compres- sion tester, and compression, the load and platen displacement being recorded until failure occurs or predetermined values for load or displacement are reached. 4 Apparatus 4.1 Compression tester, motor-driven, mechanical or hydraulic, platen-type, capable of applying load through uniform movement of one or both platens at a relative speed of 10 f 3mm/min. The platens shall be -
...