iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12622:2010/kFprA1:2013

(Amendment)

Safety of machine tools - Hydraulic press brakes

Safety of machine tools - Hydraulic press brakes

Amending the safety signs

Sicherheit von Werkzeugmaschinen - Hydraulische Gesenkbiegepressen

Sécurité des machines-outils - Presses plieuses hydrauliques

Varnost obdelovalnih strojev - Zavore hidravličnih stiskalnic - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
19-Jul-2013
ICS
25.120.10 - Forging equipment. Presses. Shears
Technical Committee
VSN - Safety of machinery
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
12-Dec-2013
Due Date
17-Dec-2013
Completion Date
12-Dec-2013
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 12622:2009/FprA1 - Safety of machine tools - Hydraulic press brakes

Relations

Consolidated By
SIST EN 12622:2010+A1:2014 - Safety of machine tools - Hydraulic press brakes
Effective Date
18-Jan-2023
Revised
SIST EN 12622:2010 - Safety of machine tools - Hydraulic press brakes
Effective Date
01-Jul-2013
Consolidated By
SIST EN 12622:2010+A1:2014 - Safety of machine tools - Hydraulic press brakes
Effective Date
19-Jan-2023
Consolidated By
SIST EN 12622:2010+A1:2014 - Safety of machine tools - Hydraulic press brakes
Effective Date
01-Jan-2014

Buy Standard

EN 12622:2010/kFprA1:2013EN 12622:2010/kFprA1:2013
PreviousNext
Draft
EN 12622:2010/kFprA1:2013
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12622:2010/kFprA1:2013
01-julij-2013
9DUQRVWREGHORYDOQLKVWURMHY=DYRUHKLGUDYOLþQLKVWLVNDOQLF'RSROQLOR$
Safety of machine tools - Hydraulic press brakes
Sicherheit von Werkzeugmaschinen - Hydraulische Gesenkbiegepressen
Sécurité des machines-outils - Presses plieuses hydrauliques
Ta slovenski standard je istoveten z: EN 12622:2009/FprA1
ICS:
25.120.10 Kovaški stroji. Stiskalnice. Forging equipment. Presses.
Škarje Shears
SIST EN 12622:2010/kFprA1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12622:2010/kFprA1:2013

---------------------- Page: 2 ----------------------

SIST EN 12622:2010/kFprA1:2013


EUROPEAN STANDARD
FINAL DRAFT
EN 12622:2009
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
April 2013
ICS 25.120.10
English Version
Safety of machine tools - Hydraulic press brakes
Sécurité des machines-outils - Presses plieuses Sicherheit von Werkzeugmaschinen - Hydraulische
hydrauliques Gesenkbiegepressen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 143.

This draft amendment A1, if approved, will modify the European Standard EN 12622:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 19085-15:2022(Main)
Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2021)
EN ISO 19085-15:2021

This part of ISO 19085 gives the safety requirements and measures for stationary manually loaded and unloaded:
-   cold presses,
-   hot presses,
-   bending presses,
-   edge/face gluing presses,
-   membrane presses,
-   embossing presses,
where pressing force is applied by hydraulic actuators pushing two flat or shaped surfaces against each other, hereinafter referred to as "machines".
It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping phases are taken into account.
NOTE:   For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
It is also applicable to machines fitted with one or more of the following devices/additional working units, whose hazards have been dealt with:
-   Device for hot gluing
-   Device for high frequency gluing
-   Device for high frequency shaping
-   Automatic work-piece loading and unloading system
-   intermediate additional platens
-   work-piece extractor
-   work-piece clamping pressure beam
-   split moveable platens.
The machines are designed to process work-pieces consisting of:
-   solid wood;
-   materials with similar characteristics to wood (see ISO 19085-1:2017, 3.2);
-   honeycomb.
This part of ISO 19085 does not deal with any hazards related to:
-   specific devices that differ from the list above;
-   hot fluid heating systems internal to the machine other than electrical;
-   any hot fluid heating systems external to the machine;
-   operation of taking intermediate platens out and in again;
-   the combination of a single machine being used with any other machine (as part of a line).
It is not applicable to:
-   frame presses;
-   membrane presses where the pressing force is applied by vacuum only;
-   presses for producing chipboard, fibreboard, OSB;
-   machines intended for use in potentially explosive atmosphere;
-   machines manufactured before the date of its publication as an international standard.

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16092-2:2021(Main)
Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses
EN ISO 16092-2:2020

1.1   This European Standard specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of mechanical presses with part revolution clutch hereinafter called presses which are intended to work cold metal or material partly of cold metal.
NOTE   The design of a machine includes the study of the machine itself, taking into account all phases of its “life”, i.e. construction, transport and commission (including assembly, installation and adjustment), use (including setting, teaching/programming or process changeover, operation, cleaning, fault finding and maintenance) and de-commissioning, dismantling and, as far as safety is concerned, disposal, and the drafting of the instructions related to all above-mentioned phases of the “life” of the machine (except construction), dealt with it in 6.5 of EN ISO 12100-2:2003.
1.2   This European Standard also covers presses, whose primary intended use is to work cold metal, which are to be used in the same way to work other sheet materials (such as cardboard, plastic, rubber or leather), and metal powder.
1.3   The requirements in this standard take account of intended use, as defined in 3.22 of EN ISO 12100-1:2003. This standard presumes access to the press from all directions, deals with the hazards during the various phases of the life of the machine described in clause 4, and specifies the safety measures for both the operator and other exposed persons.
1.4   This European Standard also applies to ancillary devices which are an integral part of the press. This standard also applies to machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machines working separately.
1.5   This European Standard does not cover mechanical presses with full revolution clutch.
1.6   This European Standard does not cover machines whose principal designed purpose is:
a)   sheet metal cutting by guillotine;
b)   attaching a

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16092-4:2021(Main)
Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO16092-4:2019)
EN ISO 16092-4:2020

1.1   This European Standard specifies technical safety requirements and protective measures to be adopted by persons undertaking the design as defined in 3.11 of EN 292-1:1991, manufacture and supply of pneumatic presses the intended use of which is the cold working of metal or material partly of metal as defined in 3.1.13 and hereafter referred as machines.
This standard also applies to machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machines working separately.
1.2   This standard also covers pneumatic presses:
-   whose primary intended use is the cold working of metal, which are to be used in the same way to work other sheet materials (e.g. cardboard, plastic, rubber, leather) and metal powder;
-   with an intermediate pneumatic/hydraulic intensifier.
1.3   The requirements in this standard take account of intended use, as defined in 3.12 of EN 292-1:1991. This standard presumes access to the press from all directions, deals with the hazards described in clause 4, and specifies the safety measures for both the operator and other exposed persons.
1.4   This standard also applies to ancillary devices which are an integral part of the press. This standard also applies to machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machines working separately.
1.5   This standard does not cover machines whose principal designed purpose is:
a)   sheet metal cutting by guillotine;
b)   bending or folding by pneumatic press brakes or folding machines;
c)   spot welding;
d)   tube bending;
e)   straightening;
f)   drop stamping;
g)   working by pneumatic hammer;
h)   compaction of metal powder.
Special pneumatic machines for assemblying or calibrating are not covered but this standard may be used as a basis for there machines.
1.6   This standard does not cover the safety requirements related to the use of PES or PPS. They will be dealt with a

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 16092-2:2020
Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses
ISO 16092-2:2019

This document, in addition to ISO 16092-1, specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of the following groups of mechanical presses and mechanical press production systems:
— Group 1: Presses with a part revolution clutch(es);
— Group 2: Presses with a servo drive system (Mechanical servo presses).
NOTE 1 Requirements in this document are essentially applicable to both groups of the mechanical press. If a requirement applies to only one group, then the group is specified.
NOTE 2 Other types of motorized drive systems provide similar functionalities to what is commonly called “servo drives” or "servo motors”, and as such their use is considered the same within the terms used in this document (e.g. variable frequency drive systems). The presses covered by this document range in size from small high-speed machines with a single operator producing small workpieces to large relatively slow-speed machines with several operators and large complex workpieces. This document deals with all significant hazards relevant to mechanical presses and ancillary devices (e.g. moving die cushions, work-piece ejectors, feeding and transfer systems) which are integral to the machine, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All phases of the machine life cycle as described in ISO 12100:2010, 5.4 have been taken into consideration.
NOTE 2 All significant hazards means those identified or associated with presses at the time of the publication
of this document.
In addition to machines not covered by ISO 16092-1:2017, this document does not cover machines which:
a) transmit energy to impart press slide motion by using hydraulic or pneumatic means;
b) have two or more slides moving in different angular orientations from each other;
NOTE 3 This document applies to presses which have two or more slides moving in the same angular orientations, e.g. a press which has inner and outer slides.
c) transmit energy to impart press slide motion by using a linear motor mechanism(s).

  • Standard
    59 pages
    English language
    sale 15% off
  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    63 pages
    French language
    sale 15% off
SIST
SIST EN ISO 16092-3:2018(Main)
Machine tools safety - Presses - Part 3: Sarety requirements for hydraulic presses (ISO 16092-3:2017)
EN ISO 16092-3:2018

This standard specifies technical safety requirements and measures to be adopted by persons undertaking the design (as defined in EN 12100), manufacture and supply of hydraulic presses which are intended to work cold metal or material partly of cold metal.
This standard applies in combination with ISO 16092-1. Both parts together cover all significant hazards relevant for hydraulic presses which are intended to work cold metal or material partly of cold metal, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16092-1:2018(Main)
Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)
EN ISO 16092-1:2018

This International standard specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of presses and ancillary devices which are intended to work cold metal or material partly of cold metal.
The requirements in this International standard take account of intended use, as defined in 3.22 of ISO 12100-1:2003. This standard presumes access to the press from all directions, deals with the hazards during the various phases of the life of the machine described in clause 4, and specifies the safety measures for both the operator and other exposed persons.
This International Standard also applies to ancillary devices which are an integral part of the press. This standard also applies to machines which are part of an integrated manufacturing system where the hazards and risk arising are comparable to those of machines working separately.
The presses covered by this standard which transmit force mechanically to cut, form, or work cold metal or other sheet materials by means of tools or dies attached to or operated by slides/ram in range in size from small high speed machines with a single operator producing small work-pieces to large relatively slow speed machines with several operators and large work-pieces.
This standard also covers presses whose primary intended use is to work cold metal, which are to be used in the same way to work other sheet materials (e.g. cardboard, plastic, rubber, leather)
This part of ISO 16092 does not cover machines whose principal designed purpose is:
a) metal cutting by guillotine;
b) attaching a fastener, e.g. riveting, stapling or stitching;
c) bending or folding by press brakes or folding machines;
d) straightening;
e) turret punch pressing;
f) extruding;
g) drop forging or drop stamping;
h) compaction of metal powder;
i) single purpose punching machines designed exclusively for profiles, e.g. for the construction industry;
j) spot welding;
k) tube bending;
l) working by pneumatic hammer;
This standard does not cover hazards related to the use of presses in explosive atmospheres
This standard covers the safety requirements related to the use of programmable electronic systems (PES) and programmable pneumatic systems (PPS).
This standard deals with the common significant hazards, hazardous situations and events relevant to presses and ancillary devices which are intended to work cold metal or material partly of cold metal when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). This part of the standard defines the common safety requirements for presses defined in clause 1.1 and should be used in connection with other parts of the ISO 16092-series

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16474:2015(Main)
Plastics and rubber machines - Tyre curing presses - Safety requirements
EN 16474:2015

This European Standard applies to the tyre curing presses as defined in 3.36 having the following configuration.
-  Crossing flow tyre curing presses, with two cavities with:
   -  common curing cycle and common safeguarding; or
   -  independent curing cycles and common safeguarding; or
   -  independent curing cycles and independent safeguarding.
-  Tyre curing presses with one cavity.
-  Tyre curing presses with automatic rear feeding and discharge.
The requirements and/or safety measures specified in this European Standard apply to tyre curing presses for passenger vehicle tyres and truck tyres.
Only automatic tyre loading into the mould and automatic tyre unloading from the mould are covered by this European Standard.
Feeding system and discharge system are not covered by this European Standard.
Hazard associated with falling of parts of the container or mould are not covered by this European Standard.
Safety requirements relating to the design of ancillary equipment which is not an integral part of the tyre curing press, e.g. conveying equipment are not covered in this European Standard.
Safety requirements relating the design of exhaust systems are not covered in this European Standard.
This European Standard covers the significant hazards listed in Clause 4.
NOTE   This European Standard is not intended to support the PED [1]. For pressure hazards, see informative Annex A.
This document is not applicable to tyre curing presses which are manufactured before the date of its publication as EN.

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16500:2014(Main)
Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
EN 16500:2014

EN 16500 specifies the safety requirements for the design, manufacture and information for safe use of vertical baling presses for compacting waste material or recyclable fractions (e. g. paper, plastics, textiles, cans, cardboard, mixed waste), hereafter referred to as materials. This standard covers vertical baling presses: - that are manually or mechanically fed; and - with fixed enclosed baling chambers (single or multiple chamber presses); and - with a mechanically, hydraulically or pneumatically operated compacting equipment; and - where the compacted bale is tied manually in the baling chamber; and - with manual unloading or mechanical ejection of the compacted bale. The scope of this standard includes any mechanical feed equipment, such as belt type conveyors or bin lifts, forming an integral part of the baling press assembly. It also includes integral material flow control equipment. This standard does not apply to: - vertical baling presses without fixed enclosed baling chamber(s); or - round balers or roll baling machines; or - machines where the material is compacted into a bag; or - pneumatic conveying systems; or - equipment for transporting the bales; or - local exhaust ventilation for the removal of dusts or vapours; or - hazards arising from any integral pre-conditioning equipment; or - hazards arising from the materials being processed (e.g. asbestos, clinical waste, flammable or explosive materials, unhealthy or poisonous waste). This standard does not apply to cranes, lift trucks or other mobile plant used to load materials into the feed opening. Nor does it apply to hazards arising from loading materials into the feed opening using cranes, lift trucks or other mobile plant. This standard does not include specifications to meet the requirements of the ATEX Directive 94/9/EC. All hazards mentioned in Clause 4 are dealt with in this European Standard. This European Standard is not applicable for vertical baling presses which are manufactured before the date of its publication as an EN.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 289:2014(Main)
Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
EN 289:2014

EN 289 specifies the essential safety requirements for compression moulding machines and transfer moulding machines for the moulding of plastics and/or rubber with a closing movement more than 6 mm. In this document a compression moulding machine or transfer moulding machine as described above is designated by the term “press”. This document deals with all significant hazards, hazardous situations and events relevant to presses, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. The safety requirements are specified for the additional hazards arising from: - shuttle/turn tables used for loading/unloading and/or cooling, - magnetic clamping systems. For other ancillary equipment, as defined in 3.7, that is not part of the press, only the requirements for the interaction between presses and ancillary equipment, especially loading and unloading devices are specified. The following machines or units are excluded: - pneumatic presses for plastic and rubber; - injection moulding machines (see EN 201:2009); - tyre curing machines (see prEN 16474); - presses for curing inner tubes and curing bags; - hydraulic presses for the cold working of metals as covered by EN 693:2001+A2:2011; - mechanical presses for the cold working of metals as covered by EN 692:2005+A1:2009; - pneumatic presses for the cold working of metals as covered by EN 13736:2003+A1:2009; - thermoforming machines (see EN 12409:2008+A1:2011); - reaction injection moulding (RIM) machines (see EN 1612-1:1997+A1:2008); - the extruder of the carousel machine(see EN 1114-1:2011). This standard does not cover: - hazards caused by the processing of materials which may lead to a risk of explosion; - the requirements of Directive 94/9/CE concerning equipment and protective systems intended for use in potentially explosive atmospheres; - requirements for the design of exhaust ventilation systems. This document is not applicable to presses manufactured before the date of its publication as EN.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12622:2010+A1:2014(Main)
Safety of machine tools - Hydraulic press brakes
EN 12622:2009+A1:2013

This European Standard specifies technical safety requirements and protective measures to be adopted by persons undertaking the design, manufacture and supply of hydraulic press brakes which are designed to work cold metal or material partly of metal and hereafter referred to as machines. This European Standard also covers hydraulic press brakes, whose primary intended use is the cold working of metal, which are to be used in the same way to work other sheet materials such as cardboard or plastic. The requirements in this European Standard take account of intended use, including foreseeable misuse as defined in 3.22 of EN ISO 12100-1:2003. This European Standard presumes access to the press brake from all directions, deals with the hazards described in Clause 4, and specifies the safety measures for both the operator and other exposed persons. This European Standard also applies to: - ancillary devices which are an integral part of the press brake, e.g. back gauges and adjustable front sheet supports; - machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machine working separately. The requirements of this European Standard apply to all hydraulic press brakes whatever the technology used in their control system, e.g. electromechanical and/ or electronic. This European Standard does not apply to machines whose principal designed purpose is: a) sheet folding by rotary action; b) tube and pipe bending by rotary action; c) roll bending. This European Standard applies to machines built after the date of issue of this European Standard. This European Standard does not cover the safety aspect of automatic loading and unloading equipment. Some guidance how to take into account additional automatic loading and unloading equipment can be found in ISO 11161.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day