SIST EN 12003:2009
(Main)Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives
Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives
This European Standard specifies the test method to be used to determine the shear adhesion strength of reaction resin ceramic tile adhesives.
This European Standard is applicable to all reaction resin ceramic tile adhesives for internal and external tile installations on floors and walls.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
NOTE Ceramic tile adhesives can also be used for other kinds of tiles (natural and agglomerated stones, etc.), where these do not adversely affect the stones.
This European Standard can involve hazardous materials and operations. Persons using this European Standard should be familiar with normal laboratory practice. This European Standard does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any European and national regulatory conditions.
Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Scherfestigkeiten von Reaktionsharz-Klebstoffen
Diese Europäische Norm legt das Prüfverfahren, das zur Beurteilung der Scherfestigkeiten von Reaktionsharz Klebstoffen für keramische Belagsmaterialien verwendet wird, fest.
Diese Europäische Norm ist auf sämtliche Reaktionsharz Klebstoffe für keramische Fliesen und Platten an Wand und Boden für innen und außen anwendbar.
Diese Europäische Norm enthält keine Anforderungen und keine Empfehlungen hinsichtlich der Planung und Verlegung von keramischen Fliesen und Platten.
ANMERKUNG Mörtel und Klebstoffe für keramische Fliesen und Platten können auch für andere Arten von Fliesen und Platten verwendet werden (Natur , Betonwerksteine usw.), sofern diese die Steine nicht negativ beeinflussen.
Diese Europäische Norm kann den Umgang mit gefährlichen Materialien und Durchführungen mit sich bringen. Personen, die diese Europäische Norm anwenden, sollten mit der üblichen Laborpraxis vertraut sein. Diese Europäische Norm beinhaltet keine vollständige Aufzählung der Sicherheitsprobleme, die mit ihrem Umgang verbunden sein könnten. Es liegt in der Verantwortung des Anwenders, Sicherheits und Gesundheitsvorschriften einzuhalten und die Übereinstimmung mit europäischen oder nationalen Vorschriften sicherzustellen.
Colles à carrelage - Détermination de l'adhérence par cisaillement des colles réactives
La présente norme européenne définit la méthode d'essai à utiliser pour déterminer l'adhérence par la mesure de la résistance au cisaillement des colles à carrelage à base de résine réactive.
Elle s'applique à toutes les colles à carrelage à base de résine réactive pour les applications en murs ou en sols, sur des ouvrages intérieurs et extérieurs.
Cette norme européenne ne contient pas de spécifications de performance ou de recommandations de conception ou d'installation de revêtements céramiques.
NOTE Les colles à carrelage peuvent aussi être utilisées pour la pose d'autres types de carrelages (carreaux de pierres naturelles, carreaux agglomérés, etc.), si elles sont compatibles.
La présente Norme européenne peut impliquer l’utilisation de produits et la mise en oeuvre de modes opératoires à caractère dangereux. Il convient que l’utilisateur de la norme connaisse bien les pratiques courantes de laboratoire. Cette norme n’a pas pour but de traiter tous les problèmes de sécurité qui sont, le cas échéant, liés à son utilisation. Il incombe à son utilisateur d’établir des pratiques appropriées en matière d’hygiène et de sécurité, et de s’assurer de la conformité à la réglementation nationale en vigueur.
Lepila za ploščice - Ugotavljanje strižne adhezijske trdnosti reakcijskih smolnih lepil
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.OHSLOMörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Scherfestigkeiten von Reaktionsharz-KlebstoffenColles à carrelage - Détermination de l'adhérence par cisaillement des colles réactivesAdhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives91.100.23Ceramic tiles83.180LepilaAdhesivesICS:Ta slovenski standard je istoveten z:EN 12003:2008SIST EN 12003:2009en,fr,de01-februar-2009SIST EN 12003:2009SLOVENSKI
STANDARDSIST EN 12003:19981DGRPHãþD
SIST EN 12003:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12003October 2008ICS 91.100.10Supersedes EN 12003:1997
English VersionAdhesive for tiles - Determination of shear adhesion strength ofreaction resin adhesivesColles à carrelage - Détermination de l'adhérence parcisaillement des colles réactivesMörtel und Klebstoffe für Fliesen und Platten - Bestimmungder Scherfestigkeiten von Reaktionsharz-KlebstoffenThis European Standard was approved by CEN on 22 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12003:2008: ESIST EN 12003:2009
EN 12003:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Sampling.4 4 Test conditions.4 5 Test materials.4 5.1 General.4 5.2 Ceramic tiles.5 6 Apparatus.5 6.1 Template.5 6.2 Spacer.6 6.3 Weight.6 6.4 Test machine.6 6.5 Shear test jig.6 7 Test methods.8 7.1 Mixing of adhesive.8 7.2 Preparation of test pieces.8 7.3 Initial shear adhesion strength.9 7.4 Shear adhesion strength after water immersion.9 7.5 Shear adhesion strength after thermal shock.9 8 Evaluation and expression of results.9 9 Test report.9
SIST EN 12003:2009
EN 12003:2008 (E) 3 Foreword This document (EN 12003:2008) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by April 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12003:1997. This document is one of a series of European Standards for tests on tile adhesives including: EN 1308, Adhesives for tiles – Determination of slip EN 1323, Adhesives for tiles – Concrete slabs for tests EN 1324, Adhesives for tiles – Determination of shear adhesion strength of dispersion adhesives EN 1346, Adhesives for tiles – Determination of open time EN 1347, Adhesives for tiles – Determination of wetting capability EN 1348, Adhesives for tiles – Determination of tensile adhesion strength for cementitious adhesives EN 12002, Adhesives for tiles – Determination of transverse deformation for cementitious adhesives and grouts EN 12003, Adhesives for tiles – Determination of shear adhesion strength of reaction resin adhesives EN 12004, Adhesives for tiles – Requirements, evaluation of conformity, classification and designation EN 12808-1, Grouts for tiles – Part 1: Determination of chemical resistance of reaction resin mortars According to the CEN/CENELEC I
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesivesOHSLOColles à carrelage - Détermination de l'adhérence par cisaillement des colles réactivesMörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Scherfestigkeiten von Reaktionsharz-KlebstoffenTa slovenski standard je istoveten z:prEN 12003kSIST prEN 12003:2008en,fr,de91.100.10ICS:SLOVENSKI
STANDARDkSIST prEN 12003:200801-maj-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTprEN 12003February 2008ICS 91.100.10Will supersede EN 12003:1997
English VersionAdhesive for tiles - Determination of shear adhesion strength ofreaction resin adhesivesMörtel und Klebstoffe für Fliesen und Platten - Bestimmungder Scherfestigkeiten von Reaktionsharz-KlebstoffenThis draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the TechnicalCommittee CEN/TC 67.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. prEN 12003:2008: E
prEN 12003:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Sampling.4 4 Test conditions.4 5 Test materials.4 5.1 General.4 5.2 Ceramic tiles.5 6 Apparatus.5 6.1 Template.5 6.2 Spacer.6 6.3 Weight.6 6.4 Test machine.6 6.5 Shear test jig.6 7 Test methods.8 7.1 Mixing of adhesive.8 7.2 Preparation of test pieces.8 7.3 Initial adhesion strength.9 7.4 Adhesion strength after water immersion.9 7.5 Adhesion strength after thermal shock.9 8 Evaluation and expression of results.9 9 Test report.9
prEN 12003:2008 (E) 3 Foreword This document (prEN 12003:2008) has been prepared by Technical Committee CEN/TC 67 “Ceramic tiles”, the secretariat of which is held by UNI. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 12003:1997. This document is one of a series of European Standards for tests on tile adhesives including: EN 1308, Adhesives for tiles - Determination of slip EN 1323, Adhesives for tiles - Concrete slabs for tests EN 1324, Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives EN 1346, Adhesives for tiles - Determination of open time EN 1347, Adhesives for tiles - Determination of wetting capability EN 1348, Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives EN 12002, Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts EN 12003, Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives EN 12004, Adhesives for tiles – Requirements evaluation of conformity, classification and designation EN 12808-1, Adhesives and grouts for t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.