Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures

This document specifies the constituent materials, the composition and the mix procedure to produce a reference concrete with a prescribed consistency and segregated portion for testing viscosity modifying admixtures as defined in EN 934 2. It also describes how to determine the requirements for the test mix in comparison with the control mix.

Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 15: Referenzbeton und Prüfverfahren zur Prüfung von viskositätsmodifizierenden Zusatzmitteln

Dieses Dokument legt die Ausgangsstoffe, die Zusammensetzung und das Mischverfahren zur Herstellung von Referenzbeton von vorgeschriebener Konsistenz und Entmischung für die Prüfung von viskositätsmodifizierenden Zusatzmitteln nach der Definition in EN 934 2 fest. Es beschreibt auch, wie die Anforderungen an die Prüfmischung im Gegensatz zur Vergleichsmischung zu bestimmen sind.

Adjuvants pour béton, mortier et coulis - Méthodes d’essai - Partie 15 : Béton de référence et méthode d’essai des adjuvants modificateurs de viscosité

Le présent document spécifie les constituants, la composition et la méthode de malaxage utilisés pour produire un béton de référence ayant une consistance prescrite et un pourcentage de laitance destiné à la réalisation d’essais sur les adjuvants modificateurs de viscosité tels que décrits dans l’EN 934 2. Il décrit également la méthode de détermination des exigences relatives au béton adjuvanté par rapport au béton témoin.

Kemijski dodatki za beton, malto in injekcijsko maso - Metode preskušanja - 15. del: Referenčni beton in metode za preskušanje spreminjanja viskoznosti dodatkov

Ta dokument določa sestavne materiale, sestavo in postopek mešanja, da nastane navedeni beton s predpisano gostoto in ločenim delom za preskušanje dodatkov za spreminjanje viskoznosti, kot je določeno v standardu EN 934 2. Prav tako opisuje, kako določiti zahteve za preskusno zmes v primerjavi s kontrolno zmesjo.

General Information

Status
Published
Public Enquiry End Date
25-Apr-2023
Publication Date
11-Sep-2023
Withdrawal Date
23-Aug-2023
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
17-Aug-2023
Due Date
22-Oct-2023
Completion Date
12-Sep-2023

Relations

Buy Standard

Standard
EN 480-15:2023
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 480-15:2023
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 480-15:2023
01-oktober-2023
Nadomešča:
SIST EN 480-15:2013
Kemijski dodatki za beton, malto in injekcijsko maso - Metode preskušanja - 15.
del: Referenčni beton in metode za preskušanje spreminjanja viskoznosti
dodatkov
Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete
and method for testing viscosity modifying admixtures
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 15:
Referenzbeton und Prüfverfahren zur Prüfung von viskositätsmodifizierenden
Zusatzmitteln
Adjuvants pour béton, mortier et coulis - Méthodes d’essai - Partie 15 : Béton de
référence et méthode d’essai des adjuvants modificateurs de viscosité
Ta slovenski standard je istoveten z: EN 480-15:2023
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 480-15:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 480-15:2023

---------------------- Page: 2 ----------------------
SIST EN 480-15:2023


EN 480-15
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2023
EUROPÄISCHE NORM
ICS 91.100.30 Supersedes EN 480-15:2013
English Version

Admixtures for concrete, mortar and grout - Test methods
- Part 15: Reference concrete and method for testing
viscosity modifying admixtures
Adjuvants pour béton, mortier et coulis - Méthodes Zusatzmittel für Beton, Mörtel und Einpressmörtel -
d'essai - Partie 15 : Béton de référence et méthode Prüfverfahren - Teil 15: Referenzbeton und
d'essai des adjuvants modificateurs de viscosité Prüfverfahren zur Prüfung von
viskositätsmodifizierenden Zusatzmitteln
This European Standard was approved by CEN on 28 May 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 480-15:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 480-15:2023
EN 480-15:2023 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Constituent materials . 6
4.1 Cement . 6
4.2 Aggregate . 6
4.3 Mixing water . 6
5 Reference concrete . 6
6 Preparation of reference concrete . 7
6.1 Mix p
...

SLOVENSKI STANDARD
kSIST FprEN 480-15:2023
01-april-2023
Kemijski dodatki za beton, malto in injekcijsko maso - Metode preskušanja - 15.
del: Referenčni beton in metode za preskušanje spreminjanja viskoznosti
dodatkov
Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete
and method for testing viscosity modifying admixtures
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 15:
Referenzbeton und Prüfverfahren zur Prüfung von viskositätsmodifizierenden
Zusatzmitteln
Adjuvants pour béton, mortier et coulis - Méthodes d’essai - Partie 15 : Béton de
référence et méthode d’essai des adjuvants modificateurs de viscosité
Ta slovenski standard je istoveten z: FprEN 480-15
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
kSIST FprEN 480-15:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST FprEN 480-15:2023

---------------------- Page: 2 ----------------------
kSIST FprEN 480-15:2023


FINAL DRAFT
EUROPEAN STANDARD
FprEN 480-15
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2023
ICS 91.100.30 Will supersede EN 480-15:2013
English Version

Admixtures for concrete, mortar and grout - Test methods
- Part 15: Reference concrete and method for testing
viscosity modifying admixtures
Adjuvants pour béton, mortier et coulis - Méthodes Zusatzmittel für Beton, Mörtel und Einpressmörtel -
d'essai - Partie 15 : Béton de référence et méthode Prüfverfahren - Teil 15: Referenzbeton und
d'essai des adjuvants modificateurs de viscosité Prüfverfahren zur Prüfung von
viskositätsmodifizierenden Zusatzmitteln
This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee
CEN/TC 104.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 480-15:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST FprEN 480-15:2023
FprEN 480-15:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Constituent materials . 5
4.1 Cement . 5
4.2 Aggregate . 5
4.3 Mixing water .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.