iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12499:2003/AC:2006

(Amendment)

Internal cathodic protection of metallic structures

Internal cathodic protection of metallic structures

TC - Modification to scope

Kathodischer Korrosionsschutz für die Innenflächen von metallischen Anlagen

Protection cathodique interne des structures métalliques

Notranja katodna zaščita kovinskih konstrukcij

General Information

Status
Published
Publication Date
31-Aug-2006
ICS
25.220.40 - Metallic coatings
91.080.10 - Metal structures
Technical Committee
IPKZ - Protection of metals against corrosion
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2006
Due Date
01-Sep-2006
Completion Date
01-Sep-2006
Ref Project
EN 12499:2003/AC:2006 - Internal cathodic protection of metallic structures

Relations

Corrects
SIST EN 12499:2003 - Internal cathodic protection of metallic structures
Effective Date
22-Dec-2008

Buy Standard

EN 12499:2003/AC:2006EN 12499:2003/AC:2006
PreviousNext
Corrigendum
EN 12499:2003/AC:2006
English and German language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kathodischer Korrosionsschutz für die Innenflächen von metallischen AnlagenProtection cathodique interne des structures métalliquesInternal cathodic protection of metallic structures91.080.10Kovinske konstrukcijeMetal structures25.220.40Kovinske prevlekeMetallic coatingsICS:Ta slovenski standard je istoveten z:EN 12499:2003/AC:2006SIST EN 12499:2003/AC:2006en,de01-september-2006SIST EN 12499:2003/AC:2006SLOVENSKI
STANDARD



SIST EN 12499:2003/AC:2006



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12499:2003/ACJune 2006Juin 2006Juni 2006ICS 77.060English versionVersion FrançaiseDeutsche FassungInternal cathodic protection of metallic structuresProtection cathodique interne desstructures métalliquesKathodischer Korrosionsschutz für dieInnenflächen von metallischen AnlagenThis corrigendum becomes effective on 7 June 2006 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 7 juin 2006 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 7.Juni 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen der ENin Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem V
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 14713-2:2020(Main)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2019)
EN ISO 14713-2:2020

This document gives guidelines and recommendations for the general principles ofdesign appropriate to articles to be hot dip galvanized after fabrication (e.g.in accordance with ISO 1461) for the corrosion protection of, for example,articles that have been manufactured in accordance with EN 1090-2. This documentdoes not apply to hot dip galvanized coatings applied to continuous wire orsheet (e.g. to EN 10346).

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12954:2020(Main)
General principles of cathodic protection of buried or immersed onshore metallic structures
EN 12954:2019

This European Standard specifies the general principles for the implementation of a system of cathodic protection against corrosive attacks on buried or immersed metal structures with and without the influence of external electrical sources.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14713-3:2017(Main)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing (ISO 14713-3:2017)
EN ISO 14713-3:2017

This document provides guidelines and recommendations regarding the general principles of design
that are appropriate for articles to be sherardized for corrosion protection.
The protection afforded by the sherardized coating to the article will depend upon the method of
application of the coating, the design of the article and the specific environment to which the article is
exposed. The sherardized article can be further protected by application of additional coatings (outside
the scope of this document), such as organic coatings (wet paints or powder coatings). When applied to
sherardized articles, this combination of coatings is often known as a “duplex system”.
General guidance on this subject can be found in ISO 12944-5 and EN 13438.
The maintenance of corrosion protection in service for steel with sherardized coatings is outside the
scope of this document.
Specific product-related requirements (e.g. for sherardized coatings on fasteners or tubes, etc.) will
take precedence over these general recommendations.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14713-1:2017(Main)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
EN ISO 14713-1:2017

This document provides guidelines and recommendations regarding the general principles of
design which are appropriate for articles to be zinc coated for corrosion protection and the level of
corrosion resistance provided by zinc coatings applied to iron or steel articles, exposed to a variety of
environments. Initial protection is covered in relation to
— available standard processes,
— design considerations, and
— environments for use.
This document applies to zinc coatings applied by the following processes:
a) hot dip galvanized coatings (applied after fabrication);
b) hot dip galvanized coatings (applied onto continuous sheet);
c) sherardized coatings;
d) thermal sprayed coatings;
e) mechanically plated coatings;
f) electrodeposited coatings.
These guidelines and recommendations do not deal with the maintenance of corrosion protection
in service for steel with zinc coatings. Guidance on this subject can be found in ISO 12944-5 and
ISO 12944-8.
NOTE There are a variety of product-related standards (e.g. for nails, fasteners, ductile iron pipes, etc.)
which provide specific requirements for the applied zinc coating systems which go beyond any general guidance
presented in this document. These specific product-related requirements will take precedence over these general
recommendations.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12499:2003(Main)
Internal cathodic protection of metallic structures
EN 12499:2003

This standard specifies the structures, electrolytes, metals, surfaces which can be protected against corrosion by application of internal cathodic protection - specifies the conditions necessary to the application of internal cathodic protection - give guidances on realisation and operation of an efficient cathodic protection system of specific structures, namely - Domestic water heaters, appliances for heating and storage, feed tank with variable level, filtering tanks, internal surface of wells casing, internal surface of pipes, tubular heat exchangers.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14713-2:2020(Main)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2019)
EN ISO 14713-2:2020

This document gives guidelines and recommendations for the general principles ofdesign appropriate to articles to be hot dip galvanized after fabrication (e.g.in accordance with ISO 1461) for the corrosion protection of, for example,articles that have been manufactured in accordance with EN 1090-2. This documentdoes not apply to hot dip galvanized coatings applied to continuous wire orsheet (e.g. to EN 10346).

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12954:2020(Main)
General principles of cathodic protection of buried or immersed onshore metallic structures
EN 12954:2019

This European Standard specifies the general principles for the implementation of a system of cathodic protection against corrosive attacks on buried or immersed metal structures with and without the influence of external electrical sources.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14713-3:2017(Main)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing (ISO 14713-3:2017)
EN ISO 14713-3:2017

This document provides guidelines and recommendations regarding the general principles of design
that are appropriate for articles to be sherardized for corrosion protection.
The protection afforded by the sherardized coating to the article will depend upon the method of
application of the coating, the design of the article and the specific environment to which the article is
exposed. The sherardized article can be further protected by application of additional coatings (outside
the scope of this document), such as organic coatings (wet paints or powder coatings). When applied to
sherardized articles, this combination of coatings is often known as a “duplex system”.
General guidance on this subject can be found in ISO 12944-5 and EN 13438.
The maintenance of corrosion protection in service for steel with sherardized coatings is outside the
scope of this document.
Specific product-related requirements (e.g. for sherardized coatings on fasteners or tubes, etc.) will
take precedence over these general recommendations.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14713-1:2017(Main)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017)
EN ISO 14713-1:2017

This document provides guidelines and recommendations regarding the general principles of
design which are appropriate for articles to be zinc coated for corrosion protection and the level of
corrosion resistance provided by zinc coatings applied to iron or steel articles, exposed to a variety of
environments. Initial protection is covered in relation to
— available standard processes,
— design considerations, and
— environments for use.
This document applies to zinc coatings applied by the following processes:
a) hot dip galvanized coatings (applied after fabrication);
b) hot dip galvanized coatings (applied onto continuous sheet);
c) sherardized coatings;
d) thermal sprayed coatings;
e) mechanically plated coatings;
f) electrodeposited coatings.
These guidelines and recommendations do not deal with the maintenance of corrosion protection
in service for steel with zinc coatings. Guidance on this subject can be found in ISO 12944-5 and
ISO 12944-8.
NOTE There are a variety of product-related standards (e.g. for nails, fasteners, ductile iron pipes, etc.)
which provide specific requirements for the applied zinc coating systems which go beyond any general guidance
presented in this document. These specific product-related requirements will take precedence over these general
recommendations.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12499:2003(Main)
Internal cathodic protection of metallic structures
EN 12499:2003

This standard specifies the structures, electrolytes, metals, surfaces which can be protected against corrosion by application of internal cathodic protection - specifies the conditions necessary to the application of internal cathodic protection - give guidances on realisation and operation of an efficient cathodic protection system of specific structures, namely - Domestic water heaters, appliances for heating and storage, feed tank with variable level, filtering tanks, internal surface of wells casing, internal surface of pipes, tubular heat exchangers.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day