SIST EN IEC 62037-3:2022
(Main)Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors (IEC 62037-3:2021)
Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors (IEC 62037-3:2021)
This part of IEC 62037 defines the impact test on coaxial connectors to evaluate their robustness
against weak connections and particles inside the connector, as independently as possible from
the effects of cable PIM (passive intermodulation).
For other connectors (e.g. panel mounted connectors), the cable can be replaced by an adequate
transmission-line (e.g. airline, stripline). In order to evaluate the effects of mechanical stresses
on the connectors, a series of impacts is applied to the connectors while measuring the PIM.
Passive HF- und Mikrowellenbauteile, Messung des Intermodulationspegels - Teil 3: Messung der passiven Intermodulation in koaxialen Steckverbindern (IEC 62037-3:2021)
Dispositifs RF et à micro-ondes passifs, mesure du niveau d’intermodulation - Partie 3: Mesure de l’intermodulation passive dans les connecteurs coaxiaux (IEC 62037-3:2021)
IEC 62037-3:2021 est disponible sous forme de IEC 62037-3:2021 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L'IEC 62037-3:2021 définit l’essai de choc sur des connecteurs coaxiaux pour évaluer leur robustesse dans le cas de connexions faibles et de particules à l’intérieur des connecteurs, aussi indépendamment que possible des effets de l’intermodulation passive des câbles. Pour les autres connecteurs (par exemple les connecteurs montés sur panneaux), le câble peut être remplacé par une ligne de transmission adéquate (par exemple une ligne à air, une ligne à ruban). Afin d’évaluer les effets des contraintes mécaniques sur les connecteurs, une série de chocs est appliquée aux connecteurs, tout en mesurant l’intermodulation passive. Cette seconde édition annule et remplace la première édition parue en 2012. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a. modification de la méthode d’impact pour utiliser une bille en acier plutôt qu’une tige en laiton;
b. ajout de l’énergie de choc exigée pour soumettre à l’essai chaque type de connecteur;
c. ajout de la méthode pour calculer l’énergie de choc pour les types de connecteurs non répertoriés dans le document.
Pasivne radiofrekvenčne (RF) in mikrovalovne naprave, meritve intermodulacijskega nivoja - 3. del: Meritve pasivne intermodulacije v koaksialnih konektorjih (IEC 62037-3:2021)
Ta del standarda IEC 62037 določa preskus vpliva na koaksialne konektorje za ugotavljanje njihove trdnosti v primerjavi s šibkimi povezavami in delci v konektorju, čim bolj neodvisno od učinkov kabla PIM (pasivna intermodulacija). Pri drugih konektorjih (npr. konektorji za panelno vgradnjo) je kabel mogoče nadomestiti z ustreznim prenosnim daljnovodom (npr. zračni vod, ploščati valovod). Za ocenjevanje učinkov mehanskih vplivov na konektorje se med merjenjem pasivne intermodulacije uporablja skupina vplivov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62037-3:2022
01-marec-2022
Nadomešča:
SIST EN 62037-3:2012
Pasivne radiofrekvenčne (RF) in mikrovalovne naprave, meritve
intermodulacijskega nivoja - 3. del: Meritve pasivne intermodulacije v koaksialnih
konektorjih (IEC 62037-3:2021)
Passive RF and microwave devices, intermodulation level measurement - Part 3:
Measurement of passive intermodulation in coaxial connectors (IEC 62037-3:2021)
Passive HF- und Mikrowellenbauteile, Messung des Intermodulationspegels - Teil 3:
Messung der passiven Intermodulation in koaxialen Steckverbindern (IEC 62037-3:2021)
Dispositifs RF et à micro-ondes passifs, mesure du niveau d’intermodulation - Partie 3:
Mesure de l’intermodulation passive dans les connecteurs coaxiaux (IEC 62037-3:2021)
Ta slovenski standard je istoveten z: EN IEC 62037-3:2021
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
33.120.30 Radiofrekvenčni konektorji RF connectors
(RF)
SIST EN IEC 62037-3:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62037-3:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 62037-3:2022
EUROPEAN STANDARD EN IEC 62037-3
NORME EUROPÉENNE
EUROPÄISCHE NORM December 2021
ICS 33.040.20 Supersedes EN 62037-3:2012 and all of its amendments
and corrigenda (if any)
English Version
Passive RF and microwave devices, intermodulation level
measurement - Part 3: Measurement of passive intermodulation
in coaxial connectors
(IEC 62037-3:2021)
Dispositifs RF et à micro-ondes passifs, mesure du niveau Passive HF- und Mikrowellenbauteile, Messung des
d'intermodulation - Partie 3: Mesure de l'intermodulation Intermodulationspegels - Teil 3: Messung der passiven
passive dans les connecteurs coaxiaux Intermodulation in koaxialen Steckverbindern
(IEC 62037-3:2021) (IEC 62037-3:2021)
This European Standard was approved by CENELEC on 2021-12-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62037-3:2021 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62037-3:2022
EN IEC 62037-3:2021 (E)
European foreword
The text of document 46/836/FDIS, future edition 2 of IEC 62037-3, prepared by IEC/TC 46 “Cables,
wires, waveguides, RF connectors, RF and microwave passive components and accessories” was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62037-3:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022–09–23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024–12–23
document have to be withdrawn
This document supersedes EN 62037-3:2012 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62037-3:2021 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62037-3:2022
EN IEC 62037-3:2021 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62037-1 - Passive RF and microwave devices, EN IEC 62037-1 -
intermodulation level measurement - Part
1: General requirements and measuring
methods
IEC 62037-4 - Passive RF and microwave devices, EN 62037-4 -
intermodulation level measurement - Part
4: Measurement of passive intermodulation
in coaxial cables
3
---------------------- Page: 5 ----------------------
SIST EN IEC 62037-3:2022
---------------------- Page: 6 ----------------------
SIST EN IEC 62037-3:2022
IEC 62037-3
®
Edition 2.0 2021-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Passive RF and microwave devices, intermodulation level measurement –
Part 3: Measurement of passive intermodulation in coaxial connectors
Dispositifs RF et à micro-ondes passifs, mesure du niveau d’intermodulation –
Partie 3: Mesure de l’intermodulation passive dans les connecteurs coaxiaux
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.040.20 ISBN 978-2-8322-1049-1
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 62037-3:2022
– 2 – IEC 62037-3:2021 © IEC 2021
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviated terms . 5
3.1 Terms and definitions . 5
3.2 Abbreviated terms . 5
4 Test method . 6
4.1 Samples for testing . 6
4.2 Connection of unit . 6
4.3 Set-up 1 – Fixed frequency test considerations . 6
4.4 Set-up 2 considerations . 6
4.5 Impacts . 6
5 Report . 7
Annex A (normative) Calculating equivalent impact energy . 8
Annex B (normative) Calculating impact energy for different connector types . 9
Figure 1 – Impact test illustration . 7
Table 1 – Impact information for some popular connectors. 7
Table A.1 – Estimated mass of various diameter steel balls . 8
Table B.1 – Impact energy calculation for RF connector type . 9
---------------------- Page: 8 ----------------------
SIST EN IEC 62037-3:2022
IEC 62037-3:2021 © IEC 2021 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PASSIVE RF AND MICROWAVE DEVICES,
INTERMODULATION LEVEL MEASUREMENT –
Part 3: Measurement of passive intermodulation in coaxial connectors
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.