iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61326:1998/A3:2004

(Amendment)

Electrical equipment for measurement, control and laboratory use - EMC requirements

Electrical equipment for measurement, control and laboratory use - EMC requirements

Will be superseded by EN 61326 series

Elektrische Betriebsmittel für Leittechnik und Laboreinsatz - EMV-Anforderungen

Matériels électriques de mesure, de commande et de laboratoire - Prescriptions relatives à la CEM

Addition of annexes E and F to EN

General Information

Status
Withdrawn
Publication Date
29-Feb-2004
Withdrawal Date
16-Oct-2024
ICS
33.100.01 - Electromagnetic compatibility in general
Technical Committee
MKP - Industrial-process measurement and control
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-Oct-2024
Due Date
08-Nov-2024
Completion Date
17-Oct-2024
Directive
2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
89/336/EEC - Electromagnetic compatibility (EMC)
Ref Project
EN 61326:1997/A3:2003 - Electrical equipment for measurement, control and laboratory use - EMC requirements

Relations

Replaced By
SIST EN 61326-2-5:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2
Effective Date
29-Jan-2023
Replaced By
SIST EN 61326-2-3:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
Effective Date
29-Jan-2023
Replaced By
SIST EN 61326-2-6:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment
Effective Date
29-Jan-2023
Replaced By
SIST EN 61326-1:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 1: General requirements
Effective Date
29-Jan-2023
Replaced By
SIST EN 61326-2-2:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
Effective Date
29-Jan-2023
Replaced By
SIST EN 61326-3-1:2008 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
Effective Date
28-Jan-2023
Replaced By
SIST EN 61326-3-2:2008 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
Effective Date
28-Jan-2023
Replaced By
SIST EN 61326-2-4:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
Effective Date
28-Jan-2023
Replaced By
SIST EN 61326-2-1:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
Effective Date
28-Jan-2023
Replaced By
SIST EN 61326-1:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 1: General requirements
Effective Date
07-Jun-2022
Replaced By
SIST EN 61326-3-2:2008 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment
Effective Date
01-Jun-2011
Replaced By
SIST EN 61326-3-1:2008 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
Effective Date
13-May-2010
Replaced By
SIST EN 61326-2-4:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
Effective Date
01-Nov-2009
Replaced By
SIST EN 61326-1:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 1: General requirements
Effective Date
01-Jan-2007
Replaced By
SIST EN 61326-2-1:2007 - Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
Effective Date
01-Jan-2007

Buy Standard

EN 61326:1998/A3:2004EN 61326:1998/A3:2004
PreviousNext
Amendment
EN 61326:1998/A3:2004
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI SIST EN 61326:1998/A3:2004

STANDARD
marec 2004
Addition of annexes E and F to EN
ICS 5HIHUHQþQDãWHYLOND
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61000-2-4:2024(Main)
Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances
EN IEC 61000-2-4:2024

This part of IEC 61000 is related to conducted disturbances in the frequency range from 0 kHz
to 150 kHz. It gives compatibility levels in differential mode (L-L and L-N) for industrial locations,
with a nominal voltage up to 35 kV and a nominal frequency of 50 Hz or 60 Hz.
NOTE 1 Industrial locations are defined in 3.1.8.
Power distribution systems on ships, aircraft, offshore platforms and railways are not included.
NOTE 2 See also Annex E. The compatibility levels specified in this document apply at the in-plant point of coupling
(IPC). The level of the low-frequency disturbances at the terminals of equipment receiving its supply from the IPC is
generally assumed to be similar to the disturbance level at the IPC itself. However, in some situations this is not the
case, particularly when a long feeder is dedicated to the supply of a particular load, or when a disturbance is
generated or amplified within the installation of which the equipment forms a part.
Compatibility levels are specified for the types of low-frequency electromagnetic disturbances
expected at any in-plant point of coupling (IPC) within industrial locations, for guidance in the
definition of:
a) limits for disturbance emissions in industrial power distribution systems (including the
planning levels defined in 3.1.5);
NOTE 3 A very wide range of conditions is possible in the electromagnetic environments of industrial networks.
These are approximated in this document by the three classes described in Clause 4. However, it is the responsibility
of the operator of such a network to take account of the particular electromagnetic and economic conditions, including
equipment characteristics, in setting the above-mentioned limits.
b) immunity levels for the equipment within these systems.
The disturbance phenomena considered are:
– voltage deviations;
– voltage dips and short interruptions;
– voltage imbalance;
– power-frequency variations;
– harmonics up to order 40;
– interharmonics up to the 40th harmonic;
– voltage components above the 40th harmonic up to 150 kHz;
– DC component;
– transient overvoltages.
The compatibility levels are given for different classes of environment determined by the
characteristics of the supply network and loads.
NOTE 4 Compatibility levels at the point of common coupling (PCC) on public networks are specified in
IEC 61000-2-2 for low-voltage networks and IEC 61000-2-12 for medium-voltage networks. IEC TR 61000-3-6 and
IEC TR 61000-3-7 describe the approach of power distribution system operators to the limitation of emissions from
installations and large loads.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 301 489-17 V3.3.1:2024(Main)
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems - Harmonised Standard for ElectroMagnetic Compatibility
ETSI EN 301 489-17 V3.2.6 (2023-06)

REN/ERM-EMC-409

  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50065-2-3:2024(Main)
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communicating equipment operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors
EN 50065-2-3:2024

This document applies to electrical equipment using signals in the frequency range 3 kHz to 95 kHz to transmit or receive information on low voltage electrical systems, for electricity suppliers and distributors. In the case of equipment which includes functions other than the transmission or reception of information on LV distribution networks or installations of network users connected to the public electricity distribution network, this document applies only to that part of the equipment intended for such transmission or reception of information. Other parts of the equipment are expected to comply with the immunity standard or standards relevant to the functions of those other parts.
The object of this document is to contribute to ensuring EMC in general. It specifies essential immunity requirements and test methods, including those tests which are to be performed during type-testing of MCE, for electromagnetic interference (EMI) generated on LV installations.
It defines the methods and requirements for testing immunity concerning the basic function of an MCE, in relation to continuous and transient disturbances, both conducted and radiated, and electrostatic discharges. Test requirements are specified for each port considered.
Furthermore it provides guidelines for the assessment of the performance of the communication function of an MCE. Normative specifications are under consideration.
This document gives limits which are applicable to MCE used by electricity suppliers and distributors (e.g. DSOs) for purposes like energy management and network monitoring and automation. The levels do not however cover extreme cases which could occur in any location but with a low probability of occurrence. In special cases situations will arise where the level of disturbances could exceed the levels specified in this document, e.g. where a hand-held transmitter is used in proximity of an apparatus. In these instances special mitigation measures might have to be employed.
It does not specify immunity between MCE operating in the same nominal frequency band or immunity to signals originating from power line carrier systems operating on high or medium-voltage networks.
Safety considerations are not included in this document.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62153-4-15:2021/A1:2024(Amendment)
Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell (IEC 62153-4-15:2021/AMD1:2024)
EN IEC 62153-4-15:2021/A1:2024
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61000-3-12:2012/A1:2024(Amendment)
Fragment 1: Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase
EN 61000-3-12:2011/A1:2024
  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-V CLC Guide 34:2024(Main)
Guide to the drafting and use of harmonized and non-harmonized EMC standards
CLC Guide 34:2024

This CENELEC Guide establishes useful guidelines for the preparation and use of standards in the field of electromagnetic compatibility (EMC) in general, and in particular for the implementation of the EMC Directive and the Radio Equipment Directive (RED). This Guide is intended to be used by Technical Committees.
The purpose of this guide is to give advice on:
-  the preparation of dedicated Product and Product Family Standards;
-  the application of EMC Standards.
Certification aspects are not covered by this Guide.
NOTE Certification is the action by a third party demonstrating that adequate confidence is provided that a duly identified product, process or service is in conformity with a standard or with other normative documents.

  • Guide
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61800-3:2024(Main)
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools (IEC 61800-3:2022)
EN IEC 61800-3:2023

IEC 61800-3:2022 specifies electromagnetic compatibility (EMC) requirements for adjustable speed power drive systems (PDSs) and machine tools (MTs). A PDS is an AC or DC motor drive including an electronic converter. Requirements are stated for AC and DC PDSs and MTs with input and/or output voltages (line-to-line voltage), up to 35 kV AC RMS. This document applies to equipment of all power ratings.
As a product EMC standard, this document can be used for the assessment of PDS and MT. It can also be used for the assessment of complete drive modules (CDM) or basic drive modules (BDM).
Traction applications and electric vehicles are excluded. Equipment which is defined as group 2 in CISPR 11:2015 is excluded.
This document does not give requirements for the electrical machine which converts power between the electrical and mechanical forms within the PDS. Requirements for rotating electrical machines are covered by the IEC 60034 series. In this document, the term "motor" is used to describe the electrical machine, whether rotary or linear, and regardless of the direction of power flow.
This document is applicable to BDMs, CDMs, PDSs and MTs with or without radio function. However, this document does not specify any radio transmission and reception requirements.
This document defines the minimum requirements for emission and immunity in the frequency range from 0 Hz to 400 GHz. Tests are not required in frequency ranges where no requirements are specified.
This fourth edition cancels and replaces the third edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
>extension of the scope to machine tools with one or more embedded PDS ;
>extension of the frequency range for radiated immunity tests to 6 GHz;
>general updates in the normative part and the informative annexes

  • Standard
    133 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62153-4-16:2021/AC:2024(Corrigendum)
Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up (IEC 62153-4-16:2021/COR1:2023)
EN IEC 62153-4-16:2021/AC:2023-11
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60335-2-7:2024(Main)
Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for washing machine (IEC 60335-2-7:2019)
EN IEC 60335-2-7:2023

This European Standard deals with the safety of electric washing machines for household and similar use, that are intended for washing clothes and textiles, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60335-2-7:2024/A11:2024(Main)
Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for washing machine
EN IEC 60335-2-7:2023/A11:2023

This European Standard deals with the safety of electric washing machines for household and similar use, that are intended for washing clothes and textiles, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day