oSIST prEN IEC 63418:2025/oprAA:2025
(Amendment)Fixed accessories intended for household and similar purposes that supply power through an interface
Fixed accessories intended for household and similar purposes that supply power through an interface
Appareils fixes prévus pour des usages domestiques et analogues qui assurent l'alimentation électrique par l'intermédiaire d'une interface
Fiksni dodatki, namenjeni za gospodinjsko in podobno uporabo, ki se napajajo prek vmesnika
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2025
Fiksni dodatki, namenjeni za gospodinjsko in podobno uporabo, ki se napajajo
prek vmesnika
Fixed accessories intended for household and similar purposes that supply power
through an interface
Appareils fixes prévus pour des usages domestiques et analogues qui assurent
l'alimentation électrique par l'intermédiaire d'une interface
Ta slovenski standard je istoveten z: prEN IEC 63418:2025/prAA:2025
ICS:
29.120.30 Vtiči, vtičnice, spojke Plugs, socket-outlets,
couplers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 63418:2025
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
October 2025
ICS -
English Version
Fixed accessories intended for household and similar purposes
that supply power through an interface
Appareils fixes prévus pour des usages domestiques et To be completed
analogues qui assurent l'alimentation électrique par
l'intermédiaire d'une interface
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 63418:2025; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2026-01-02.
It has been drawn up by CLC/TC 23BX.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 82443 Ref. No. prEN IEC 63418:2025/prAA:2025 E
prEN 63418:2025/prAA:2025 (E)
8 European foreword
9 This document (prEN IEC 63418:2025/prAA:2025) has been prepared by CLC/TC 23BX, “Switches, boxes and
10 enclosures for household and similar purposes, plugs and socket outlet for D.C.”.
11 This document is currently submitted to the Enquiry.
12 The following dates are proposed:
• latest date by which the existence of this document (doa) dav + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
13 This document has been prepared under a standardization request addressed to CENELEC by the European
14 Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
15 Member States.
16 For the relationship with EU Legislation, see informative Annexes ZZA and ZZB, which is an integral part of this
17 document.
18 Annex ZA
19 (normative)
21 Normative references to international publications with their
22 corresponding European publications
23 The following documents are referred to in the text in such a way that some or all of their content constitutes
24 requirements of this document. For dated references, only the edition cited applies. For undated references, the
25 latest edition of the referenced document (including any amendments) applies.
26 NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
27 EN/HD applies.
28 NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
29 www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-75 2014 Environmental testing – Part 2-75: Tests – EN 60068-2-75 2014
Test Eh: Hammer tests
IEC 60112 - Method for the determination of the proof and EN IEC 60112 2020
the comparative tracking indices of solid
insulating materials
IEC 60127 series Miniature fuses
Miniature fuses - Part 1: Definitions for EN 60127-1 2006
miniature fuses and general requirements for
+ A1 2011
miniature fuse-links
+ A2 2015
Miniature fuses - Part 10: User guide for EN 60127-10 2002
miniature fuses
Miniature fuses - Part 2: Cartridge fuse-links EN 60127-2 2014
+ A1 2023
Miniature fuses - Part 3: Sub-miniature fuse- EN 60127-3 2015
links
+ A1 2020
Miniature fuses - Part 4: Universal modular EN 60127-4 2005
fuse-links (UMF) - Through-hole and surface
+ A1 2009
mount types
+ A2 2013
Miniature fuses - Part 5: Guidelines for quality EN 60127-5 2017
assessment of miniature fuse-links
Miniature fuses - Part 6: Fuse-holders for EN 60127-6 2014
miniature fuse-links
Miniature fuses - Part 7: Miniature fuse-links EN 60127-7 2016
for special applications
Miniature fuses - Part 8: Fuse resistors with EN IEC 60127-8 2018
particular overcurrent protection
prEN 63418:2025/prAA:2025 (E)
Publication Year Title EN/HD Year
IEC 60227-1 2024 Polyvinyl chloride insulated cables of rated -
voltages up to and including 450/750 V - Part
1: General requirements
IEC 60227-3 2024 Polyvinyl chloride insulated cables of rated -
voltages up to and including 450/750 V - Part
3: Non-sheathed cables for fixed wiring
IEC 60227-4 2024 Polyvinyl chloride insulated cables of rated -
voltages up to and including 450/750 V - Part
4: Sheathed cables for fixed wiring
IEC 60227-5 2024 Polyvinyl chloride insulated cables of rated -
voltages up to and including 450/750 V - Part
5: Flexible cables (cords
IEC 60227-6 2024 Polyvinyl chloride insulated cables of rated -
voltages up to and including 450/750 V - Part 6
: lift cables and cables for flexible connections
IEC 60227-7 2024 Polyvinyl chloride insulated cables of rated -
voltages up to and including 450/750 V - Part
7: Flexible cables screened and unscreened
with two or more conductors and of rated
voltages up to and including 300/500 V
IEC 60245-1 2003 Rubber insulated cables - Rated voltages up to - -
and including 450/750 V - Part 1 : general
requirements
+ A1 2007 - -
IEC 60245-3 1994 Rubber insulated cables. Rated voltages UP to - -
and including 450/750 V. Part 3 : heat resistant
silicone insulated cables.
+ A1 1997 - -
+ A2 2011 - -
IEC 60245-4 2011 Rubber insulated cables - Rated voltages up to - -
and including 450/750 V - Part 4 : cords and
flexible cables
IEC 60245-5 1994 Rubber insulated cables - Rated voltages up to - -
and including 450/750 V - Part 5 : lift cables
+ A1 2003
IEC 60245-6 1994 Rubber insulated cables. Rated voltages UP to - -
and including 450/750 V. Part 6 : arc welding
electrode cables.
+ A1 1997
+ A2 2003
IEC 60245-7 1994 Rubber insulated cables. Rated voltages UP to - -
and including 450/750 V. Part 7 : heat resistant
+ A1 1997 - -
ethylene-vinyl acetate rubber insulated cables.
IEC 60245-8 1998 Rubber insulated cables. Rated voltages UP to - -
and including 450/750 V. Part 8 : cords for
applications requiring high flexibility
+ A1 2003 - -
Publication Year Title EN/HD Year
+ A2 2011 - -
IEC 60317-0-1 2013 Specifications for particular types of winding EN 60317-0-1 2014
wires – Part 0-1: General requirements –
Enamelled round copper wire
+ A1 2019 + A1 2019
IEC 60417 2024 Graphical symbols for use on equipment – 12- - -
month subscription to regularly updated online
database comprising all graphical symbols
published in IEC 60417
IEC 60423 2007 Conduit systems for cable management – EN 60423 2007
Outside diameters of conduits for electrical
installations and threads for conduits and
fittings
IEC 60529 1989 Degrees of protection provided by enclosures EN 60529 1991
(IP Code)
+ corrigendum May 1993
+ AC 2016
+ A1 1999 + A1 2000
+ A2 2013 + A2 2013
+ A2:2013/AC 2019
IEC 60669 series Switches for household and similar fixed-
electrical installations
Switches for household and similar fixed EN 60669-1 2018
electrical installations - Part 1: General
+ AC 2018
requirements
+ AC 2020
Switches for household and similar fixed EN IEC 60669-2-1 2022
electrical installations - Part 2-1: Particular
+ A11 2022
requirements - Electronic switches
+ AC 2024-
+ AC 2024-
Switches for household and similar fixed EN 60669-2-2 2006
electrical installations - Part 2-2: Particular
requirements - Electromagnetic remote-control
switches (RCS)
Switches for household and similar fixed EN 60669-2-3 2006
electrical installations - Part 2-3: Particular
requirements - Time delay switches (TDS)
Switches for household and similar fixed EN 60669-2-4 2005
electrical installations - Part 2-4: Particular
requirements - Isolating switches
Switches for household and similar fixed EN 60669-2-5 2016
electrical installations - Part 2-5: Particular
requirements - Switches and related
accessories for use in home and building
electronic systems (HBES)
prEN 63418:2025/prAA:2025 (E)
Publication Year Title EN/HD Year
Switches for household and similar fixed EN 60669-2-6 2012
electrical installations - Part 2-6: Particular
requirements - Fireman's switches for exterior
and interior signs and luminaires
IEC 60670 series Boxes and enclosures for electrical EN IEC 60670-1 2021
accessories for household and similar fixed
+ A11 2021
electrical installations
EN 60670-21 2007
+ A1 2023
+ A11 2023
EN 60670-22 2006
EN 60670-23 2008
+ A1 2023
+ A11 2023
EN 60670-24 2013
+ A11 2023
IEC 60670-1 - Boxes and enclosures for electrical EN IEC 60670-1 2021
accessories for household and similar fixed
electrical installations – Part 1: General
requirements
+ A11 2021
IEC 60695-2-10 2021 Fire hazard testing – Part 2-10: Glowing/hot- EN IEC 60695-2-10 2021
wire based test methods – Glow-wire
apparatus and common test procedure
+ AC 2024
IEC 60695-2-11 2021 Fire hazard testing – Part 2-11: Glowing/hot- EN IEC 60695-2-11 2021
wire based test methods – Glow-wire
flammability test method for end products
(GWEPT)
IEC 60998-2-1 - Connecting devices for low-voltage circuits for EN 60998-2-1 2004
household and similar purposes – Part 2-1:
Particular requirements for connecting devices
as separate entities with screw-type clamping
units
IEC 60998-2-2 - Connecting devices for low-voltage circuits for EN 60998-2-2 2004
household and similar purposes – Part 2-2:
Particular requirements for connecting devices
as separate entities with screwless-type
clamping units
IEC 61000-3-2 2018 Electromagnetic compatibility (EMC) – Part 3- EN IEC 61000-3-2 2019
2: Limits – Limits for harmonic current
emissions (equipment input current ≤16 A per
phase)
+ A1 2021
+ A2 2024 + A2 2024
Publication Year Title EN/HD Year
IEC 61000-4-2 2008 Electromagnetic compatibility (EMC) – Part 4- EN IEC 61000-4-2 2009
2: Testing and measurement techniques –
Electrostatic discharge immunity test
IEC 61000-4-3 2020 Electromagnetic compatibility (EMC) – Part 4- EN IEC 61000-4-3 2020
3: Testing and measurement techniques –
Radiated, radio-frequency, electromagnetic
field immunity test
IEC 61000-4-4 2012 Electromagnetic compatibility (EMC) – Part 4- EN 61000-4-4 2012
4: Testing and measurement techniques –
Electrical fast transient/burst immunity test
IEC 61000-4-5 2014 Electromagnetic compatibility (EMC) – Part 4- EN 61000-4-5 2014
5: Testing and measurement techniques –
Surge immunity test
+ A1 2017 + A1 2017
IEC 61000-4-6 2023 Electromagnetic compatibility (EMC) – Part 4- EN IEC 61000-4-6 2023
6: Testing and measurement techniques –
Immunity to conducted disturbances, induced
by radio-frequency fields
IEC 61000-4-11 2020 Electromagnetic compatibility (EMC) – Part 4- EN IEC 61000-4-11 2020
11: Testing and measurement techniques –
Voltage dips, short interruptions and voltage
variations immunity tests for equipment with
input current up to 16 A per phase
+ AC 2020
+ AC 2022
IEC 61032 1997 Protection of persons and equipment by EN 61032 1998
enclosures – Probes for verification
IEC 61058 series Switches for appliances
Switches for appliances - Part 1: General EN IEC 61058-1 2018
requirements
Switches for appliances - Part 1-1: EN 61058-1-1 2016
Requirements for mechanical switches
+ AC 2019
Switches for appliances - Part 1-2: EN 61058-1-2 2016
Requirements for electronic switches
+ AC 2019
Switches for appliances - Part 2-1: Particular EN IEC 61058-2-1 2021
requirements for cord switches
Switches for appliances - Part 2-4: Particular EN IEC 61058-2-4 2021
requirements for independently mounted
switches
Switches for appliances - Part 2-5: Particular EN IEC 61058-2-5 2021
requirements for change-over selectors
Switches for appliances - Part 2-6: Particular EN I
...








Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.