SIST EN 60320-3:2015/A2:2023
(Amendment)Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges (IEC 60320-3:2014/AMD2:2022)
Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges (IEC 60320-3:2014/AMD2:2022)
Gerätesteckvorrichtungen für den Hausgebrauch und ähnliche allgemeine Zwecke - Teil 3: Normblätter und Lehren (IEC 60320-3:2014/AMD2:2022)
Connecteurs pour usages domestiques et usages généraux analogues - Partie 3: Feuilles de norme et calibres (IEC 60320-3:2014/AMD2:2022)
Aparatne spojke za hišno rabo in podobne splošne namene - 3. del: Standardni merilni lističi - Dopolnilo A2 (IEC 60320-3:2014/AMD2:2022)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60320-3:2015/A2:2023
01-maj-2023
Aparatne spojke za hišno rabo in podobne splošne namene - 3. del: Standardni
merilni lističi - Dopolnilo A2 (IEC 60320-3:2014/AMD2:2022)
Appliance couplers for household and similar general purposes - Part 3: Standard sheets
and gauges (IEC 60320-3:2014/AMD2:2022)
Gerätesteckvorrichtungen für den Hausgebrauch und ähnliche allgemeine Zwecke - Teil
3: Normblätter und Lehren (IEC 60320-3:2014/AMD2:2022)
Connecteurs pour usages domestiques et usages généraux analogues - Partie 3:
Feuilles de norme et calibres (IEC 60320-3:2014/AMD2:2022)
Ta slovenski standard je istoveten z: EN 60320-3:2014/A2:2022
ICS:
29.120.30 Vtiči, vtičnice, spojke Plugs, socket-outlets,
couplers
SIST EN 60320-3:2015/A2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60320-3:2015/A2:2023
---------------------- Page: 2 ----------------------
SIST EN 60320-3:2015/A2:2023
EUROPEAN STANDARD EN 60320-3:2014/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2022
ICS 29.120.30
English Version
Appliance couplers for household and similar general purposes -
Part 3: Standard sheets and gauges
(IEC 60320-3:2014/AMD2:2022)
Connecteurs pour usages domestiques et usages généraux Gerätesteckvorrichtungen für den Hausgebrauch und
analogues - Partie 3: Feuilles de norme et calibres ähnliche allgemeine Zwecke - Teil 3: Normblätter und
(IEC 60320-3:2014/AMD2:2022) Lehren
(IEC 60320-3:2014/AMD2:2022)
This amendment A2 modifies the European Standard EN 60320-3:2014; it was approved by CENELEC on 2022-11-09. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60320-3:2014/A2:2022 E
---------------------- Page: 3 ----------------------
SIST EN 60320-3:2015/A2:2023
EN 60320-3:2014/A2:2022 (E)
European foreword
The text of document 23G/476/FDIS, future IEC 60320-3/AMD2, prepared by SC 23G "Appliance
couplers" of IEC/TC 23 "Electrical accessories" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60320-3:2014/A2:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-08-09
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-11-09
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60320-3/AMD2 was approved by CENELEC as a European
Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 60320-3:2015/A2:2023
IEC 60320-3
®
Edition 1.0 2022-10
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 2
AM ENDEMENT 2
Appliance couplers for household and similar general purposes –
Part 3: Standard sheets and gauges
Connecteurs pour usages domestiques et usages généraux analogues –
Partie 3: Feuilles de norme et calibres
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.120.30 ISBN 978-2-8322-5774-6
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 5 ----------------------
SIST EN 60320-3:2015/A2:2023
– 2 – IEC 60320-3:2014/AMD2:2022
© IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
APPLIANCE COUPLERS FOR HOUSEHOLD
AND SIMILAR GENERAL PURPOSES –
Part 3: Standard sheets and gauges
AMENDMENT 2
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of
...
SLOVENSKI STANDARD
SIST EN 60320-3:2015/oprA2:2022
01-marec-2022
Aparatne spojke za hišno rabo in podobne splošne namene - 3. del: Standardni
merilni lističi - Dopolnilo A2
Amendment 2 - Appliance couplers for household and similar general purposes - Part 3:
Standard sheets and gauges
Gerätesteckvorrichtungen für den Hausgebrauch und ähnliche allgemeine Zwecke - Teil
3: Normblätter und Lehren
Connecteurs pour usages domestiques et usages généraux analogues - Partie 3:
Feuilles de norme et calibres
Ta slovenski standard je istoveten z: EN 60320-3:2014/prA2:2022
ICS:
29.120.30 Vtiči, vtičnice, spojke Plugs, socket-outlets,
couplers
SIST EN 60320-3:2015/oprA2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60320-3:2015/oprA2:2022
---------------------- Page: 2 ----------------------
SIST EN 60320-3:2015/oprA2:2022
23G/470/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60320-3/AMD2 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-01-07 2022-04-01
SUPERSEDES DOCUMENTS:
23G/465/CD, 23G/468A/CC
IEC SC 23G : APPLIANCE COUPLERS
SECRETARIAT: SECRETARY:
Sweden Mr Ingvar Eriksson
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
SC 34D,TC 61,TC 108
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Amendment 2 - Appliance couplers for household and similar general purposes - Part 3:
Standard sheets and gauges
PROPOSED STABILITY DATE: 2024
NOTE FROM TC/SC OFFICERS:
Copyright © 2021 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it,
for any other purpose without permission in writing from IEC.
---------------------- Page: 3 ----------------------
SIST EN 60320-3:2015/oprA2:2022
IEC CDV 60320-3/AMD2 © IEC 2021 2 23G/470/CDV
1 Introduction (not part of the proposal)
2
3 This update reintroduces the table of compatibility
4 The drawings in Table 2 are added.
5 Standard sheets updated.
6
7
8 Proposal
9 4 General requirements
10 Add, in Table 2, the following rows:
60245
IEC 53
or
60245 IEC
c
10 I 120 Yes 0,75
89
M N
60245
IEC 53
or
60245 IEC
c
10 I 155 Yes 0,75
89
O P
60245
IEC 53
or
60245 IEC
c
16 I 155 Yes 1
89
Q
R
11
12
13 Add the following new standard sheets after the existing standard sheet L:
14
15
---------------------- Page: 4 ----------------------
SIST EN 60320-3:2015/oprA2:2022
IEC CDV 60320-3/AMD2 © IEC 2021 3 23G/470/CDV
16 Standard sheet M
17 Plug connector for 10 A / 250 V for use in class I equipment in hot conditions
18
19 The outline 1) of the front part shall not be exceeded or decreased, at any point, within a
20 distance of 17 mm from the engagement face.
21 The outline 2) of the rear part shall not be exceeded in any section perpendicular to the axis of
22 the plug connector, except that, for plug connectors with lateral cord entry and for those
23 combined with other accessories, this limitation does not apply in the direction of the axis of the
24 cord or of the actuating member.
25 The sketches are not intended to govern design except as regards the dimensions shown.
26 Dimensions in millimetres
27
28
29 NOTE The sketches are not intended to govern design, except as regards the dimensions shown. Dimensions
30 without tolerances are only recommendations.
31
---------------------- Page: 5 ----------------------
SIST EN 60320-3:2015/oprA2:2022
IEC CDV 60320-3/AMD2 © IEC 2021 4 23G/470/CDV
32
33 Standard sheet N
34 Appliance outlet 10 A / 250 V for class I equipment in hot conditions
35
36 The sketches are not intended to govern design except as regards the dimensions shown.
37
38 Dimensions in millimetres
39
40
41
42
43 NOTE The sketches are not intended to govern design, except as regards the dimensions shown. Dimensions
44 without tolerances are only recommendations.
45
46
---------------------- Page: 6 ----------------------
SIST EN 60320-3:2015/oprA2:2022
IEC CDV 60320-3/AMD2 © IEC 2021 5 23G/470/CDV
47 Standard sheet O
48 Plug connector for 10 A / 250 V for use in class I equipment in very hot condition
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.