SIST EN 10111:1998
(Main)Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
This European standard specifies the grades of continuously hot rolled tow caroon steel sheet and strip (in coils) for cold forming. Depending on its actual width, strip is classified as: - hot rolled wide strip if its width is greater than or equal to 600 mm; - hot rolled slit wide strip, if its width is less than 600 mm. For each grade, it specifies the chemical composition and the mechanical properties. This European Standard is applicable to products of thickness not less than 1,5 mm and not exceeding 8 mm. This European Standard is not applicable to products covered by other standards, such as: - hot roiled products of non-alloy structural steels for general use (EN 10025); - steel sheet for pressure purposes (EN 10028); - steel sheet for welded gas cylinders (EN 10120); - quenched and tempered steels (EN 10083-1 and EN 10083-2).
Kontinuierlich warmgewalztes Band und Blech aus weichen Stählen zum Kaltumformen - Technische Lieferbedingungen
Diese Europäische Norm gilt für kontinuierlich warmgewalztes Blech und Band (in Rollen) aus weichen Stählen zum Kaltumformen. Nach seiner tatsächlichen Breite wird das Band unterteilt nach Warmbreitband mit Breiten >= mm und längsgeteiltes Warmbreitband mit Breiten < 600 mm.
Bandes et tôles laminées a chaud en continu, en acier doux pour emboutissage ou pliage a froid - Conditions techniques de livraison
La présente norme européenne prescrit les qualités des tôles et bandes (en bobines) laminées a chaud en continu, en acier doux pour emboutissage ou pliage a froid. Suivant sa largeur réelle la bande est classée en: large bande a chaud,si sa largeur est supérieure ou égale a 600 mm; large bande a chaud refendue, si sa largeur est inférieure a 600 mm.
Kontinuirno vroče valjane pločevine in trakovi iz maloogljičnega jekla za preoblikovanje v hladnem - Tehnični dobavni pogoji
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kontinuierlich warmgewalztes Band und Blech aus weichen Stählen zum Kaltumformen - Technische LieferbedingungenBandes et tôles laminées a chaud en continu, en acier doux pour emboutissage ou pliage a froid - Conditions techniques de livraisonContinuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions77.14
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.