SIST EN 60286-3-2:2009

Packaging of components for automatic handling - Part 3-2: Packaging of surface mount components on continuous tapes - Type VI - Blister carrier tapes of 4 mm width (IEC 60286-3-2:2009)

This part of IEC 60286 is applicable to the tape packing of ultra small surface mount components using plastic blister carrier tape of 4 mm in width which has concave cavities for containing components of 1 mm in pitch of the component compartments (W4P1).

Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 3-2: Gurtung von oberflächenmontierbaren Bauelementen auf Endlosgurten - Typ VI - Blistergurte mit 4 mm Breite (IEC 60286-3-2:2009)

Emballage de composants pour opérations automatisées - Partie 3-2: Emballage des composants appropriés au montage en surface en bandes continues - Type VI: Bandes porteuses à cloques de 4 mm de large (CEI 60286-3-2:2009)

Pakiranje komponent za avtomatično ravnanje - 3-2. del: Pakiranje komponent za površinsko montažo na neprekinjene trakove - Tip VI - Mehurčkasti nosilni trakovi širine 4 mm (IEC 60286-3-2:2009)

General Information

• Status: Withdrawn
• Publication Date: 20-Sep-2009
• Withdrawal Date: 04-Jul-2016
• ICS: 31.020 - Electronic components in general
• ICS: 55.060 - Spools. Bobbins
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 14-Jun-2016
• Due Date: 07-Jul-2016
• Completion Date: 05-Jul-2016
• Ref Project: EN 60286-3-2:2009 - Packaging of components for automatic handling - Part 3-2: Packaging of surface mount components on continuous tapes - Type VI - Blister carrier tapes of 4 mm width

Relations

• Replaced By: SIST EN 60286-3:2013 - Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes
• Effective Date: 28-Jan-2023
• Replaced By: SIST EN 60286-3:2013 - Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60286-3-2:2009
01-oktober-2009
3DNLUDQMHNRPSRQHQW]DDYWRPDWLþQRUDYQDQMHGHO3DNLUDQMHNRPSRQHQW]D
SRYUãLQVNRPRQWDåRQDQHSUHNLQMHQHWUDNRYH7LS9,0HKXUþNDVWLQRVLOQLWUDNRYL
ãLULQHPP,(&
Packaging of components for automatic handling - Part 3-2: Packaging of surface mount
components on continuous tapes - Type VI - Blister carrier tapes of 4 mm width (IEC
60286-3-2:2009)
Gurtung und Magazinierung von Bauelementen für automatische Verarbeitung - Teil 3-2:
Gurtung von oberflächenmontierbaren Bauelementen auf Endlosgurten - Typ VI -
Blistergurte mit 4 mm Breite (IEC 60286-3-2:2009)
Emballage de composants pour opérations automatisées - Partie 3-2: Emballage des
composants appropriés au montage en surface en bandes continues - Type VI: Bandes
porteuses à cloques de 4 mm de large (CEI 60286-3-2:2009)
Ta slovenski standard je istoveten z: EN 60286-3-2:2009
ICS:
31.020 Elektronske komponente na Electronic components in
splošno general
55.060 Tulci. Vretena Spools. Bobbins
SIST EN 60286-3-2:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60286-3-2:2009

---------------------- Page: 2 ----------------------

SIST EN 60286-3-2:2009

EUROPEAN STANDARD
EN 60286-3-2

NORME EUROPÉENNE
August 2009
EUROPÄISCHE NORM

ICS 31.020; 31.240


English version


Packaging of components for automatic handling -
Part 3-2: Packaging of surface mount components on continuous tapes -
Type VI -
Blister carrier tapes of 4 mm width
(IEC 60286-3-2:2009)


Emballage de composants  Gurtung und Magazinierung
pour opérations automatisées - von Bauelementen
Partie 3-2: Emballage des composants für automatische Verarbeitung -
appropriés au montage Teil 3-2: Gurtung
en surface en bandes continues - von oberflächenmontierbaren
Type VI - Bauelementen auf Endlosgurten -
Bandes porteuses Typ VI -
à cloques de 4 mm de large Blistergurte mit 4 mm Breite
(CEI 60286-3-2:2009) (IEC 60286-3-2:2009)



This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60286-3-2:2009 E

---------------------- Page: 3 ----------------------

SIST EN 60286-3-2:2009
EN 60286-3-2:2009 – 2 –
Foreword
The text of document 40/1973/FDIS, future edition 1 of IEC 60286-3-2, prepared by IEC TC 40,
Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 60286-3-2 on 2009-07-01.
This European Standard is to be used in conjunction with EN 60286-3.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-07-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60286-3-2:2009 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60286-3-2:2009
– 3 – EN 60286-3-2:2009

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60286-3 2007 Packaging of components for automatic EN 60286-3 2007
handling -
Part 3: Packaging of surface mount
components on continuous tapes

---------------------- Page: 5 ----------------------

SIST EN 60286-3-2:2009

---------------------- Page: 6 ----------------------

SIST EN 60286-3-2:2009
IEC 60286-3-2
®
Edition 1.0 2009-05
INTERNATIONAL
STANDARD


Packaging of components for automatic handling –
Part 3-2: Packaging of surface mount components on continuous tapes –
Type VI – Blister carrier tapes of 4 mm width


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
K
ICS 31.020; 31.240 ISBN 2-8318-1039-6
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 60286-3-2:2009
– 2 – 60286-3-2 © IEC:2009(E)
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 General .5
1.1 Scope.5
1.2 Normative references .5
2 Tape dimensions .6
3 Polarity and orientation of components in the tape .8
4 Fixing components and additional tape requirements.8
4.1 Tape requirements .8
4.2 Peel force of the cover tape.9
4.3 Minimum bending radius.9
4.4 Break force of the cover tapes.9
4.5 Taping material .9
5 Packing .9
5.1 General .9
5.2 Reel dimensions.9
6 Marking .9
Annex A (informative) Dimensions of reel .10

Figure 1 – Type VI carrier tape .6
Figure 2 – Maximum pocket off-set .6
Figure 3 – Maximum component tilt, rotation and lateral movement .7
Figure A.1 – Reel.10

Table 1 – Constant dimensions of carrier tape .7
Table 2 – Variable dimensions of carrier tape .8
Table A.1 – Dimensions of reel .10

---------------------- Page: 8 ----------------------

SIST EN 60286-3-2:2009
60286-3-2 © IEC:2009(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING –

Part 3-2: Packaging of surface mount components on continuous tapes –
Type VI – Blister carrier tapes of 4 mm width


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical m
...