SIST EN 15632-4:2022
(Main)District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods
District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with metal service pipes; requirements and test methods
This document provides requirements and test methods for flexible, factory made, buried district heating pipe systems with metallic service pipes and bonding between the layers of the pipe assemblies and thermal insulation materials of polyurethane or polyisocyanurate foam, the casing being made of polyethylene.
It shall be used in conjunction with part 1.
This document is valid for maximum media temperatures up to 120 °C and, occasionally peak temperatures up to 140 °C for maximum 300 h/a, and a design pressure up to 2,5 MPa for a design lifetime of at least 30 years.
This document covers surveillance systems.
In conjunction with the other parts of EN 15632, this document is applicable to pipes, fittings, their joints and to joints with components made of non-plastics materials intended to be used for district heating installations.
NOTE For higher temperatures or for the transport of other fluids, for example potable water, additional requirements and testing is needed. Such requirements are not specified in this document.
Fernwärmerohre - Werkmäßig gedämmte flexible Rohrsysteme - Teil 4: Verbundmediumrohre aus Metall; Anforderungen und Prüfungen
Dieses Dokument enthält Anforderungen und Prüfverfahren für flexible, werkmäßig hergestellte, erdverlegte Fernwärmenetze mit Mediumrohren aus Metall, Verbund zwischen den Schichten der Rohrbaugruppen sowie Wärmedämmstoffen aus Polyurethan oder Polyisocyanurat-Schaumstoff, wobei der Außenmantel aus Polyethylen hergestellt ist.
Es muss in Verbindung mit Teil 1 verwendet werden.
Dieses Dokument gilt für eine maximale Medientemperatur von 120 °C, gelegentlich auftretende Temperaturspitzen bis 140 °C für maximal 300 h/a sowie für einen zulässigen Betriebsdruck bis einschließlich 2,5 MPa für eine Auslegungslebensdauer von mindestens 30 Jahren.
Dieses Dokument gilt für Überwachungssysteme.
Zusammen mit den anderen Teilen von EN 15632 gilt dieses Dokument für Rohre, Formstücke, ihre Verbindungen untereinander sowie mit Rohrleitungsteilen, deren Werkstoffe nicht aus Kunststoff bestehen und die für Fernwärmeinstallationen vorgesehen sind.
ANMERKUNG Für höhere Temperaturen oder für den Transport anderer Flüssigkeiten, z. B. Trinkwasser, sind zusätzliche Anforderungen und Prüfungen erforderlich. Derartige Anforderungen sind in diesem Dokument nicht festgelegt.
Tuyaux de chauffage urbain - Systèmes de tuyaux flexibles manufacturés - Partie 4 : Système bloqué avec tubes de service en métal ; exigences et méthodes d'essai
Le présent document fournit les exigences et les méthodes d’essai relatives aux systèmes de tuyaux de chauffage urbain flexibles manufacturés enterrés avec des tubes de service en métal, une adhérence entre les couches des assemblages de tubes et des matériaux d’isolation thermique en mousse de polyuréthane ou de polyisocyanate ; les tubes de protection doivent être en polyéthylène.
Il doit être utilisé conjointement avec la partie 1.
Le présent document s’applique à des températures maximales de fluide de 120 °C et, occasionnellement des températures de fusion maximales de 140 °C pour une durée maximale de 300 h/a, et des pressions de conception maximales de 2,5 MPa, pour une durée de vie prévue d’au moins 30 ans.
Le présent document couvre les systèmes de surveillance.
Le présent document s’applique conjointement avec les autres parties de l’EN 15632 aux tuyaux, raccords, leurs joints, et aux joints avec des composants en matériaux non plastiques destinés à être utilisés pour les installations de chauffage urbain.
NOTE Pour les températures plus élevées ou pour le transport d’autres fluides, par exemple, de l’eau potable, des exigences et des essais supplémentaires sont nécessaires. Ces exigences ne sont pas spécifiées dans le présent document.
Cevi za daljinsko ogrevanje - Tovarniško izdelani gibki cevni sistemi - 4. del: Vezane kovinske cevi - Zahteve in preskusne metode
Ta dokument določa zahteve in preskusne metode za tovarniško izdelane gibke podzemne cevne sisteme za daljinsko ogrevanje s kovinskimi delovnimi cevmi z medsebojno vezanimi sloji in toplotno izolacijo iz poliuretana ali poliizocianuratne pene, katerih plašč je iz polietilena.
Uporabljati ga je treba skupaj s 1. delom.
Ta dokument se uporablja za najvišjo temperaturo medijev do 120 °C z občasno najvišjo temperaturo do 140 °C za največ 300 h/a in s konstrukcijskim obratovalnim tlakom do 2,5 MPa za predvideno življenjsko dobo vsaj 30 let.
Ta dokument zajema nadzorne sisteme.
Ta dokument se v povezavi z drugimi deli standarda EN 15632 uporablja za cevi, fitinge, njihove spoje ter spoje s komponentami iz nepolimernih materialov, namenjene uporabi v napeljavah za daljinsko ogrevanje.
OPOMBA: Za višje temperature ali prevoz drugih tekočin, na primer pitne vode, so potrebni dodatne zahteve in preskusi. Take zahteve niso določene v tem dokumentu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 15632-4:2022
01-julij-2022
Nadomešča:
SIST EN 15632-4:2009
Cevi za daljinsko ogrevanje - Tovarniško izdelani gibki cevni sistemi - 4. del:
Vezane kovinske cevi - Zahteve in preskusne metode
District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with
metal service pipes; requirements and test methods
Fernwärmerohre - Werkmäßig gedämmte flexible Rohrsysteme - Teil 4:
Verbundmediumrohre aus Metall; Anforderungen und Prüfungen
Tuyaux de chauffage urbain - Systèmes de tuyaux flexibles manufacturés - Partie 4 :
Système bloqué avec tubes de service en métal ; exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 15632-4:2022
ICS:
23.040.07 Cevovodi za daljinsko Pipeline and its parts for
ogrevanje in njihovi deli district heat
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
SIST EN 15632-4:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15632-4:2022
---------------------- Page: 2 ----------------------
SIST EN 15632-4:2022
EN 15632-4
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2022
EUROPÄISCHE NORM
ICS 23.040.07 Supersedes EN 15632-4:2009
English Version
District heating pipes - Factory made flexible pipe systems
- Part 4: Bonded system with metal service pipes;
requirements and test methods
Tuyaux de chauffage urbain - Systèmes de tuyaux Fernwärmerohre - Werkmäßig gedämmte flexible
flexibles manufacturés - Partie 4 : Système bloqué avec Rohrsysteme - Teil 4: Verbundmediumrohre aus
tubes de service en métal ; exigences et méthodes Metall; Anforderungen und Prüfungen
d'essai
This European Standard was approved by CEN on 27 March 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15632-4:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15632-4:2022
EN 15632-4:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Operating conditions . 6
5 Requirements . 6
5.1 General requirements . 6
5.2 Service pipes, fittings and their connections . 6
5.3 Axial shear strength of the pipe assemblies . 8
5.4 Linear water tightness of pipe assemblies . 8
5.5 Fittings . 8
5.6 Surveillance systems . 8
6 Test procedures . 8
6.1 General . 8
6.2 Axial shear strength of pipe assemblies . 8
6.2.1 General . 8
6.2.2 Test procedure . 9
6.3 Cycle test . 10
6.4 Linear water tightness of pipe assemblies . 11
Annex A (informative) Guideline for testing . 12
Bibliography . 14
2
---------------------- Page: 4 ----------------------
SIST EN 15632-4:2022
EN 15632-4:2022 (E)
European foreword
This document (EN 15632-4:2022) has been prepared by Technical Committee CEN/TC 107
“Prefabricated district heating and district cooling pipe systems”, the secretariat of which is held by DS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2022, and conflicting national standards shall
be withdrawn at the latest by November 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15632-4:2009.
This document is one of a series of standards which form several parts of EN 15632, District heating
pipes — Factory made flexible pipe systems:
— Part 1: Classification, general requirements and test methods;
— Part 2: Bonded system with plastic service pipes; requirements and test methods;
— Part 3: Non bonded system with plastic service pipes; requirements and test methods;
— Part 4: Bonded system with metal service pipes; requirements and test methods.
In comparison with EN 15632-4:2009, the following changes have been made:
a) change in the temperature in the scope;
b) changes in the steel qualities, including the referenced standards;
c) completely revised “guideline for testing” in the informative Annex A.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 15632-4:2022
EN 15632-4:2022 (E)
Introduction
District heating technology has developed rapidly since its origin and especially in recent times. Today,
there are different generations of district heating networks. The technologies of these generations are
driven by the different heat sources and operating temperatures used.
CEN/TC 107 provides a set of European standard series for rigid and flexible piping systems in district
heating to suit all generations and requirements of district heating networks in the market.
The standard documents ensure quality for pre-fabricated piping systems in district heating.
This standard series covers flexible, pre-fabricated piping systems for operation conditions as described
in the scope of part 1.
4
---------------------- Page: 6 ----------------------
SIST EN 15632-4:2022
EN 15632-4:2022 (E)
1 Scope
This document specifies requirements and test methods for flexible, factory made, buried district heating
pipe systems with metallic service pipes and bonding between the layers of the pipe assemblies and
thermal insulation materials of polyurethane or polyisocyanurate foam, the casing being made of
polyethylene.
It is only applicable in conjunction with part 1.
This document is applicable to pipes, fittings, their joints and to joints with components made of non-
plastics materials intended to be used for district heating installations.
This document is applicable to a continuous operating temperature up to 120 °C and a maximum
operating temperature of 140 °C for maximum 300 h/a, and a design pressure up to 2,5 MPa for a design
service life of at least 30 years.
This document does not apply to cover surveillance systems.
NOTE For higher temperatures or for the transport of other fluids, for example potable water, additional
requirements and testing is needed. Such requirements are not specified in this document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1057, Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating
applications
EN 10088-2, Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion
resisting steels for general purposes
EN 10204, Metallic products - Types of inspection documents
EN 10216-2, Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy
and alloy steel tubes with specified elevated temperature properties
EN 10217-2, Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric
welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10305-1, Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold
drawn tubes
EN 10305-2, Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold
drawn tubes
EN 10305-3, Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized
tubes
EN 12449, Copper and copper alloys - Seamless, round tubes for general purposes
EN 14419, District heating pipes - Bonded single and twin pipe systems for buried hot water netwo
...
SLOVENSKI STANDARD
oSIST prEN 15632-4:2021
01-januar-2021
Cevi za daljinsko ogrevanje - Tovarniško izdelani gibki cevni sistemi - 4. del:
Vezane kovinske cevi - Zahteve in preskusne metode
District heating pipes - Factory made flexible pipe systems - Part 4: Bonded system with
metal service pipes; requirements and test methods
Fernwärmerohre - Werkmäßig gedämmte flexible Rohrsysteme - Teil 4:
Verbundmediumrohre aus Metall; Anforderungen und Prüfungen
Tuyaux de chauffage urbain - Systèmes de tuyaux flexibles préisolés - Partie 4 :
Système bloqué avec tubes de service en métal ; exigences et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 15632-4
ICS:
23.040.07 Cevovodi za daljinsko Pipeline and its parts for
ogrevanje in njihovi deli district heat
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
oSIST prEN 15632-4:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15632-4:2021
---------------------- Page: 2 ----------------------
oSIST prEN 15632-4:2021
DRAFT
EUROPEAN STANDARD
prEN 15632-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2020
ICS 23.040.07 Will supersede EN 15632-4:2009
English Version
District heating pipes - Factory made flexible pipe systems
- Part 4: Bonded system with metal service pipes;
requirements and test methods
Tuyaux de chauffage urbain - Systèmes de tuyaux Fernwärmerohre - Werkmäßig gedämmte flexible
flexibles préisolés - Partie 4 : Système bloqué avec Rohrsysteme - Teil 4: Verbundmediumrohre aus
tubes de service en métal ; exigences et méthodes Metall; Anforderungen und Prüfungen
d'essai
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 107.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15632-4:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15632-4:2021
prEN 15632-4:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Operating conditions . 6
5 Requirements . 6
5.1 General requirements . 6
5.2 Service pipes, fittings and their connections . 7
5.3 Axial shear stress of the pipe assemblies . 8
5.4 Linear water tightness of pipe assemblies . 8
5.5 Fittings . 8
5.6 Surveillance systems . 8
6 Test procedures . 8
6.1 General . 8
6.2 Axial shear strength of pipe assemblies . 8
6.2.1 General . 8
6.2.2 Test procedure . 9
6.3 Cycle test . 10
6.4 Linear water tightness of pipe assemblies . 10
Annex A (informative) Guideline for testing . 12
Bibliography . 14
2
---------------------- Page: 4 ----------------------
oSIST prEN 15632-4:2021
prEN 15632-4:2020 (E)
European foreword
This document (prEN 15632-4:2020) has been prepared by Technical Committee CEN/TC 107
“Prefabricated district heating and district cooling pipe system”, the secretariat of which is held by DS.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 15632-4:2009.
This document is one of a series of standards which form several parts of EN 15632, District heating
pipes — Factory made flexible pipe systems:
Part 1: Classification, general requirements and test methods;
Part 2: Bonded system with plastic service pipes; requirements and test methods;
Part 3: Non bonded system with plastic service pipes; requirements and test methods;
Part 4: Bonded system with metal service pipes; requirements and test methods
In comparison to EN 15632-4:2009 the following changes have been made:
a) change the temperature in the scope;
b) changes in the mild steel qualities incl. the referring standards;
c) completely revised “guideline for testing” in the informative Annex A.
3
---------------------- Page: 5 ----------------------
oSIST prEN 15632-4:2021
prEN 15632-4:2020 (E)
Introduction
Factory made flexible bonded pipe systems with metallic service pipes are used in district and local
heating networks.
This part of the series of standards for the various types of flexible pipe systems shall be used in
connection with EN 15632-1 which specifies the basic design criteria for flexible district heating pipes.
4
---------------------- Page: 6 ----------------------
oSIST prEN 15632-4:2021
prEN 15632-4:2020 (E)
1 Scope
This document provides requirements and test methods for flexible, factory made, buried district
heating pipe systems with metallic service pipes and bonding between the layers of the pipe assemblies
and thermal insulation materials of polyurethane or polyisocyanurate foam, the casing being made of
polyethylene.
It shall be used in conjunction with part 1.
This document is valid for maximum media temperatures up to 120 °C and, occasionally peak
temperatures up to 140 °C for maximum 300 h/a, and a design pressure up to 2,5 MPa for a design
lifetime of at least 30 years.
This document covers surveillance systems.
In conjunction with the other parts of EN 15632, this document is applicable to pipes, fittings, their
joints and to joints with components made of non-plastics materials intended to be used for district
heating installations.
NOTE For higher temperatures or for the transport of other fluids, for example potable water, additional
requirements and testing is needed. Such requirements are not specified in this document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1057, Copper and copper alloys — Seamless, round copper tubes for water and gas in sanitary and
heating applications
EN 10088-2, Stainless steels — Part 2: Technical delivery conditions for sheet/plate and strip of corrosion
resisting steels for general purposes
EN 10216-2, Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Non-
alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-2, Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric
welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10305-1, Steel tubes for precision applications — Technical delivery conditions — Part 1: Seamless
cold drawn tubes
EN 10305-2, Steel tubes for precision applications — Technical delivery conditions — Part 2: Welded cold
drawn tubes
EN 10305-3, Steel tubes for precision applications — Technical delivery conditions — Part 3: Welded cold
sized tubes
EN 12449, Copper and copper alloys — Seamless, round tubes for general purposes
EN 14419, District heating pipes — Bonded single and twin pipe systems for buried hot water networks —
Surveillance systems
EN 15632-1, District heating pipes — Factory made flexible pipe systems — Part 1: Classification, general
requirements and test methods
5
---------------------- Page: 7 ----------------------
oSIST prEN 15632-4:2021
prEN 15632-4:2020 (E)
3 Terms and definitions
For the purposes of this document, the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.