SIST EN 12016:1999
(Main)Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Immunity
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Immunity
This European Standard specifies the immunity levels and test conditions for lifts, escalators and passenger conveyors, which are permanently installed in buildings and for which CEN/TC 10 has direct responsibility for the production of European Standards, in relation to continuous and transient, conducted and radiated disturbances including electrostatic discharges. These levels represent essential EMC requirements ; however, this standard does no specify the basic safety requirements for lifts, escalators and passenger conveyors, which are covered by EN 81-1, EN 81-2 and EN 115. If, however, electronic means are used in safety circuits associated with safety components then this standard applies. In other cases, where ultmate passenger safety is not influenced by EMC considerations, this standard can be used to assess the overall performance. Since lifts travel large vertical distances in buildings, it becomes impraticcable to test the total assembly either in a test laboratory or in situ (where the uncontrolled environment may also infuence the test procedures and results). Likewise, due to pratical restrictions imposed by the lift car internal dimensions, it is impraticable to test the lift car from within. Similar considerations regarding dimensions apply equally to the testing of escalators and passenger conveyors. Therefore, this standard applies to the sub-systems and/or apparatus of lifts, esalators and passenger conveyors, an assembly of which will comprise an installation, the boundaries of which are indicated by example in figures 2 and 3. However this standard does not apply to lighting apparatus and other services amready proven to be in conformity to the EMC Directive.
Elektromagnetische Verträglichkeit - Produktfamilien-Norm für Aufzüge, Fahrtreppen und Fahrsteige - Störfestigkeit
Diese Europäische Norm legt die Prüfschärfegrade und Prüfbedingungen für Aufzüge, Fahrtreppen und Fahrsteige, die dauerhaft in Gebäuden installiert sind und für die das CEN/TC10 direkt für die Erstellung von Europäischen Normen verantwortlich ist, in Bezug zu kontinuierlichen und vorübergehenden, leitungs- oder strahlungsgebundenen Störungen, einschließlich elektrostatischer Entladungen fest. Diese Grenzwerte stellen grundlegende EMV-Anforderungen dar.
Compatibilité électromagnétique - Norme famille de produits pour ascenseurs, escaliers mécaniques et trottoirs roulants - Immunité
La présente norme européenne spécifie les niveaux d'immunité et les conditions d'essai relatifs aux interférences électromagnétique pour les ascenseurs, escaliers mécaniques et trottoirs roulants qui sont installés de façon permanente dans des bâtiments et pour lesquels le CEN/TC10 a la responsabilité directe de l'établissement de normes européennes, en relation avec les perturbations continues et transitoires, par conduction et rayonnement, y compris les décharges électrostatiques.
Elektromagnetna združljivost - Standard skupine izdelkov za dvigala, tekoče stopnice in trakove - Odpornost proti motnjam
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektromagnetische Verträglichkeit - Produktfamilien-Norm für Aufzüge, Fahrtreppen und Fahrsteige - StörfestigkeitCompatibilité électromagnétique - Norme famille de produits pour ascenseurs, escaliers mécaniques et trottoirs roulants - ImmunitéElectromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Immunity91.140.90Lifts. Escalators33.100.20ImunostImmunityICS:Ta slovenski standard je istove
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.