SIST EN 1301-1:2008
(Main)Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery
Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery
This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy drawn wire for general engineering applications.
It does not apply for aeronautical application.
It applies to drawn wires, except for electrical or welding purposes.
It does not apply to drawing stock.
Aluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 1: Technische Lieferbedingungen
Dieses Dokument legt die Technischen Lieferbedingungen für gezogene Drähte aus Aluminium und Aluminiumlegierungen für allgemeine Anwendungen fest.
Es gilt nicht für Anwendungen in der Luftfahrt.
Es gilt für gezogene Drähte, ausgenommen Drähte für elektrotechnische oder schweißtechnische Anwendungen.
Es gilt nicht für Vordraht.
Aluminium et alliages d'aluminium - Fil étiré - Partie 1: Conditions techniques de contrôle et de livraison
Ce document spécifie les conditions techniques de contrôle et de livraison du fil étiré en aluminium ou en alliage d'aluminium destiné à des applications mécaniques générales.
Il ne s'applique pas aux applications aéronautiques.
Il s’applique aux fils étirés, à l’exception des fils électriques et de soudage.
Il ne s’applique pas aux fils machine.
Aluminij in aluminijeve zlitine - Vlečena žica - 1. del: Tehnični pogoji za prevzem in dobavo
General Information
- Status
- Published
- Publication Date
- 05-Oct-2008
- Technical Committee
- INEK - Nonferrous metals
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 24-Sep-2008
- Due Date
- 29-Nov-2008
- Completion Date
- 06-Oct-2008
Relations
- Effective Date
- 01-Nov-2008
- Effective Date
- 25-Mar-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
SIST EN 14361:2025 - Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
SIST EN 1301-2:2008 - Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties - Effective Date
- 28-Jan-2026
- Referred By
SIST EN 1301-3:2008 - Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
SIST EN 1301-1:2008 specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy drawn wire intended for general engineering applications. Developed by the Slovenian Institute for Standardization (SIST), this standard is aligned with the European standard EN 1301-1:2008 and covers requirements for product quality, manufacturing processes, mechanical properties, and documentation. It is important to note that this standard does not cover drawn wires for aeronautical, electrical, welding, or drawing stock purposes.
Adhering to these standardized technical conditions helps ensure consistent quality and traceability, supporting the reliable use of aluminium and aluminium alloy drawn wire in a variety of industrial applications.
Key Topics
- Scope of Application
- Applicable to aluminium and aluminium alloy drawn wires for engineering (non-aeronautical, non-electrical, non-welding uses)
- Ordering and Product Requirements
- Specifies details to be included in orders, such as:
- Product form and type (e.g., round, rectangular wire)
- Designation of alloy and temper (in accordance with EN 573-3 and EN 515)
- Dimensions, tolerances (see EN 1301-3)
- Quantity, certificates, and any special requirements
- Specifies details to be included in orders, such as:
- Manufacturing and Quality Control
- Manufacturer discretion over production processes unless otherwise specified
- Full responsibility for inspection and testing lies with the manufacturer
- Chemical and Mechanical Properties
- Chemical composition to comply with EN 573-3
- Mechanical properties as per EN 1301-2 or mutually agreed specifications
- Product Integrity and Appearance
- Wires must be free from defects that could affect performance
- Requirements for surface finish, packaging, and marking as agreed
- Testing and Inspection
- Procedures for sampling, chemical and mechanical testing, retesting
- Test methodology references EN 10002-1 for tensile testing and EN 1301-2 for mechanical properties
- Documentation
- Certificates of mass and analysis and inspection certificates (as per EN 10204)
- Non-conformity Handling
- Arbitration process for dispute resolution over compliance
Applications
Aluminium and aluminium alloy drawn wire produced under SIST EN 1301-1:2008 is widely used in general engineering sectors. Typical applications include:
- Fasteners and hardware: Bolts, pins, and other mechanical components
- Automotive parts: Non-aeronautical sectors requiring high-quality and reliable material
- Construction: Fencing, mesh, support wires, and framing elements
- Industrial equipment: Springs, cables, and wire forms for machines
- Consumer goods: Components in appliances, furniture, and fittings
Using wire that conforms to this standard ensures compatibility with industry expectations for quality, consistency, and documentation-facilitating easier procurement, manufacturing, and product acceptance.
Related Standards
- EN 573-3: Chemical composition and form of wrought aluminium products
- EN 515: Designations for temper of wrought aluminium and its alloys
- EN 1301-2: Mechanical properties of drawn wire
- EN 1301-3: Tolerances on dimensions of drawn wire
- EN 10002-1: Tensile testing method for metallic materials
- EN 10204: Types of inspection documents for metallic products
- EN 12258-1: General terms and definitions for aluminium and its alloys
- EN 14361: Aluminium and aluminium alloys - Chemical analysis - Sampling guidance
SIST EN 1301-1:2008 provides the foundation for technical compliance, supports traceability, and streamlines quality assurance processes for manufacturers and end-users in the aluminium wire industry.
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
SIST EN 1301-1:2008 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery". This standard covers: This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy drawn wire for general engineering applications. It does not apply for aeronautical application. It applies to drawn wires, except for electrical or welding purposes. It does not apply to drawing stock.
This document specifies the technical conditions for inspection and delivery of aluminium and aluminium alloy drawn wire for general engineering applications. It does not apply for aeronautical application. It applies to drawn wires, except for electrical or welding purposes. It does not apply to drawing stock.
SIST EN 1301-1:2008 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1301-1:2008 has the following relationships with other standards: It is inter standard links to SIST EN 1301-1:1998, SIST EN 573-3:2026, SIST EN 573-3:2019+A2:2024, SIST EN 12258-1:1999, SIST EN 10204:2004, SIST EN 14361:2025, SIST EN ISO 6892-1:2020, SIST EN 515:2017, SIST EN 1301-2:2008, SIST EN 1301-3:2008, SIST EN 15088:2006, SIST EN 1090-3:2008, SIST EN 1090-3:2019, SIST EN 13195:2014, SIST EN 13195:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1301-1:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GREDYRAluminium und Aluminiumlegierungen - Gezogene Drähte - Teil 1: Technische LieferbedingungenAluminium et alliages d'aluminium - Fil étiré - Partie 1: Conditions techniques de contrôle et de livraisonAluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:EN 1301-1:2008SIST EN 1301-1:2008en,fr,de01-november-2008SIST EN 1301-1:2008SLOVENSKI
STANDARDSIST EN 1301-1:19981DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1301-1September 2008ICS 77.150.10Supersedes EN 1301-1:1997
English VersionAluminium and aluminium alloys - Drawn wire - Part 1: Technicalconditions for inspection and deliveryAluminium et alliages d'aluminium - Fil étiré - Partie 1 :Conditions techniques de contrôle et de livraisonAluminium und Aluminiumlegierungen - Gezogene Drähte -Teil 1: Technische LieferbedingungenThis European Standard was approved by CEN on 16 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1301-1:2008: ESIST EN 1301-1:2008
Foreword : amended; Clause 2: EN 12258-1:1998 and EN 14361 added; Clause 3: subclauses 3.1 to 3.9 deleted and replaced by reference to EN 12258-1:1998; Clause 6: subclauses 6.1.2 and 6.1.3 modified; Clause 7: completely revised. EN 1301 comprises the following parts under the general title: "Aluminium and aluminium alloys – Drawn wire": Part 1: Technical conditions for inspection and delivery Part 2 : Mechanical properties Part 3 : Tolerances on dimensions According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
...