oSIST prEN 13451-4:2024
(Main)Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms
Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms
This document specifies safety requirements for starting platforms with a height ≤ 750 mm above water level. These requirements are additional to those given in EN 13451-1 and these documents are intended to be read together.
The requirements of this specific standard take priority over those in EN 13451-1.
This document is applicable to starting platforms for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2.
Schwimmbadgeräte - Teil 4: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Startblöcke
Dieses Dokument legt sicherheitstechnische Anforderungen für Startblöcke mit einer Höhe ≤ 750 mm über dem Wasserspiegel fest. Diese Anforderungen ergänzen die Anforderungen in EN 13451-1 und diese Dokumente sind dafür vorgesehen, zusammen gelesen werden.
Die Anforderungen dieser speziellen Norm haben Vorrang gegenüber EN 13451-1.
Dieses Dokument gilt für Startblöcke zum Gebrauch in klassifizierten Schwimmbädern nach den Festlegungen in EN 15288-1 und EN 15288-2.
Équipement de piscine - Partie 4 : Exigences de sécurité et méthodes d'essai complémentaires spécifiques aux plots de départ
Le présent document spécifie des exigences de sécurité pour les plots de départ avec une hauteur ≤ 750 mm au-dessus du niveau de l’eau. Ces exigences sont complémentaires à celles données dans l’EN 13451-1 et ces documents sont destinés à être lus ensemble.
Les exigences de la présente norme spécifique prévalent sur celles de l'EN 13451-1.
Le présent document s'applique aux plots de départ destinés à être utilisés dans des piscines classées, tel que spécifié dans l'EN 15288-1 et dans l’EN 15288-2.
Oprema za plavalne bazene - 4. del: Dodatne posebne varnostne zahteve in preskusne metode za startne bloke
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13451-4:2024
01-julij-2024
Oprema za plavalne bazene - 4. del: Dodatne posebne varnostne zahteve in
preskusne metode za startne bloke
Swimming pool equipment - Part 4: Additional specific safety requirements and test
methods for starting platforms
Schwimmbadgeräte - Teil 4: Zusätzliche besondere sicherheitstechnische
Anforderungen und Prüfverfahren für Startblöcke
Équipement de piscine - Partie 4 : Exigences de sécurité et méthodes d'essai
complémentaires spécifiques aux plots de départ
Ta slovenski standard je istoveten z: prEN 13451-4
ICS:
97.220.10 Športni objekti Sports facilities
oSIST prEN 13451-4:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13451-4:2024
---------------------- Page: 2 ----------------------
oSIST prEN 13451-4:2024
DRAFT
EUROPEAN STANDARD
prEN 13451-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2024
ICS 97.220 Will supersede EN 13451-4:2014
English Version
Swimming pool equipment - Part 4 : Additional specific
safety requirements and test methods for starting
platforms
Equipement de piscine - Partie 4: Exigences de sécurité Schwimmbadgeräte - Teil 4: Zusätzliche besondere
et méthodes d'essai complémentaires spécifiques aux sicherheitstechnische Anforderungen und
plots départ Prüfverfahren für Startblöcke
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 136.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13451-4:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13451-4:2024
prEN 13451-4:2024(E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Safety requirements . 5
4.1 Design and dimensions . 5
4.2 Structural integrity . 6
4.3 Slip resistance . 7
4.4 Entry area .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.