iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 13911:2024

(Main)

Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters

Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters

This document specifies minimum safety requirements and test methods for a firehood to be worn during firefighting operations to protect against heat and fire.
This document has two optional requirements: firehoods can be either with a ventilation window for comfort, or a barrier for protection against particulate contaminants, or both.
This document applies in situations when protective clothing (e.g. EN 469, EN ISO 15384), respiratory protection devices (e.g. EN 136 and EN 137), and helmet (e.g. EN 443, EN 16471) are also worn.

Schutzkleidung für die Feuerwehr - Anforderungen und Prüfverfahren für Feuerschutzhauben für die Feuerwehr

Dieses Dokument legt Mindestsicherheitsanforderungen und Prüfverfahren für die bei der Brandbekämpfung zu tragende Feuerschutzhaube fest, um sich gegen Hitze und Feuer zu schützen.
Dieses Dokument enthält zwei wahlfreie Anforderungen: Feuerschutzhauben können entweder mit einem Belüftungsfenster für Komfortzwecke oder mit einer Barriere zum Schutz gegen Kontamination durch Partikel (Partikelbarriere) ausgestattet sein.
Dieses Dokument gilt für Situationen, in denen zudem Schutzkleidung (z. B. EN 469, EN ISO 15384), Atemschutzgeräte (z. B. EN 136 und EN 137), und Helme (z. B. EN 443, EN 16471) getragen werden.

Habillement de protection pour sapeurs-pompiers - Exigences et méthodes d’essai pour les cagoules de protection contre le feu pour sapeurs-pompiers

Le présent document spécifie les exigences de sécurité minimales et les méthodes d’essai relatives à une cagoule de protection contre le feu portée dans le cadre d’opérations de lutte contre des incendies pour assurer une protection contre la chaleur et le feu.
Le présent document contient deux exigences facultatives : les cagoules de protection contre le feu peuvent être équipées d’une zone de ventilation pour le confort et/ou d’une barrière de protection contre les particules contaminantes.
Le présent document s’applique dans les situations nécessitant le port concomitant d’un habillement de protection (par exemple, EN 469, EN ISO 15384), d’appareils de protection respiratoire (par exemple, EN 136 et EN 137), et de casque (par exemple, EN 443, EN 16471).

Zaščitna obleka za gasilce - Zahteve in preskusne metode za zaščitne gasilske kapuce

General Information

Status
Not Published
Public Enquiry End Date
29-Apr-2024
ICS
13.220.10 - Fire-fighting
13.340.20 - Head protective equipment
Technical Committee
OVP - Personal protecting equipment
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
26-Feb-2024
Due Date
15-Jul-2024
Directive
2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
M/571 - COMMISSION IMPLEMENTING DECISION of 19.11.2020 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards personal protective equipment in support of Regulation (EU) 2016/425 of the European Parliament and of the Council
Ref Project
prEN 13911 - Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters

Relations

Replaces
SIST EN 13911:2017 - Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters
Effective Date
03-Feb-2021

Buy Standard

prEN 13911:2024 - BARVEprEN 13911:2024 - BARVE
PreviousNext
Draft
prEN 13911:2024 - BARVE
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13911:2024
01-april-2024
Nadomešča:
SIST EN 13911:2017
Zaščitna obleka za gasilce - Zahteve in preskusne metode za zaščitne gasilske
kapuce
Protective clothing for firefighters - Requirements and test methods for fire hoods for
firefighters
Schutzkleidung für die Feuerwehr - Anforderungen und Prüfverfahren für
Feuerschutzhauben für die Feuerwehr
Habillement de protection pour sapeurs-pompiers - Exigences et méthodes d’essai pour
les cagoules de protection contre le feu pour sapeurs-pompiers
Ta slovenski standard je istoveten z: prEN 13911
ICS:
13.220.10 Gašenje požara Fire-fighting
13.340.20 Varovalna oprema za glavo Head protective equipment
oSIST prEN 13911:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13911:2024

---------------------- Page: 2 ----------------------
oSIST prEN 13911:2024


DRAFT
EUROPEAN STANDARD
prEN 13911
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2024
ICS 13.340.20 Will supersede EN 13911:2017
English Version

Protective clothing for firefighters - Requirements and test
methods for fire hoods for firefighters
Vêtements de protection pour les sapeurs-pompiers - Schutzkleidung für die Feuerwehr - Anforderungen
Exigences et méthodes d'essai pour les cagoules de und Prüfverfahren für Feuerschutzhauben für die
protection contre le feu pour sapeurs-pompiers Feuerwehr
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 162.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13911:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13911:2024
prEN 13911:2024 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Design and materials . 9
4.1 Introduction . 9
4.2 Flexibility . 9
4.3 Facial opening . 9
4.4 Yoke interface area .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14458:2018(Main)
Personal eye-equipment - High performance visors intended only for use with protective helmets
EN 14458:2018

This European Standard specifies the minimum requirements for visors designed specifically to be used only with protective helmets, including but not limited to those conforming to EN 443, EN 14052, EN 16471 and EN 16473 as the situation dictates. These visors may be permanently fitted to, or removable from, the helmet. See the scope of the various helmet standards for applications.
These visors are not intended to protect against smoke and gas /vapour hazards.
Three types of visors in two forms are described in this document.
The two forms are:
-   face guards provide both eye and face protection, and
-   eye guards that are shorter and effectively provide only eye protection.
The three types are:
-   Visors for general use: Eye guards and face guards providing resistance and/or protection against mechanical, liquid chemical and basic physical hazards.
-   Visors with increased thermal performance: Face guards that additionally provide resistance and/or protection against higher than basic levels of heat and flame. This additional requirement is not applicable for eye guards.
-   Mesh visors: Eye guards and face guards that incorporate mesh oculars with defined levels of performance from EN 1731, and other additional mechanical requirements described in this standard.
Visors for sporting use, those with corrective effect, and goggles used with a protective helmet are not covered by this standard.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13911:2017(Main)
Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters
EN 13911:2017

This standard specifies minimum safety requirements and test methods for a firehood to be worn during firefighting operations and associated activities. This standard only applies in situations when protective clothing (EN 469), breathing apparatus (EN 136 and EN 137), and helmet (EN 443) are also worn.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16473:2015(Main)
Firefighters helmets - Helmets for technical rescue
EN 16473:2014

This European Standard specifies the minimum requirements for technical rescue helmets. These helmets are intended to protect the upper head mainly against the effects of mechanical hazards such as impact and penetration, flame, electrical and chemical hazards whilst conducting technical rescue and associated activities.
Technical rescues involves work associated with the environments and conditions associated with operational scenarios such as but not limited to those found during road traffic collisions and when working in and around collapsed structures often for extended periods of time after natural disasters (flood, earthquake, etc.)
Requirements for marking and information to be supplied by the manufacturer are included.
Helmets for use whilst firefighting in buildings and other structures or in wildland firefighting environments, are not covered by this European Standard, see EN 443 and EN 16471.
Helmets for use in water rescue operations using craft are also not covered by this European Standard.
Protection of the face, eyes, ears and neck may require additional items of PPE, which are not covered by this European Standard.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16471:2015(Main)
Firefighters helmets - Helmets for wildland fire fighting
EN 16471:2014

This European Standard specifies the minimum requirements for wildland fire fighting helmets protecting the upper head mainly against the effects of impact, penetration, heat, flame and burning embers whilst conducting fire fighting and associated activities in wildland environments. Requirements for marking and information to be supplied by the manufacturer are included. Wildland fire fighting involves direct and indirect attack techniques (like wood cutting). This helmet is not intended to provide protection during fire entrapment.
Wildland environments include forests, crops, plantations and grass/heath/scrub or farmland.
Helmets for use whilst fire fighting in buildings and other structures are not covered by this European Standard (see EN 443).
Protection of the face, eyes, ears and neck may require additional items of PPE, which are not covered by this European Standard.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 443:2008
Helmets for fire fighting in buildings and other structures
EN 443:2008

The purpose of this European Standard is to provide essential performance requirements for protective helmets for Firefighters whilst firefighting in buildings and other structures. The helmets in this Standard can be used for other activities subject to a Risk Assessment. This standard allows options to take account of particular national requirements.
The standard also includes guidance on selection, use, care and maintenance in an informative annex. Fire fighters should be trained in the use, care and maintenance of helmets covered by this standard, including an understanding of any limitation.
The standard deals with two types of helmets: a type A and a type B. Selection of the type of helmet and any optional equipment should be made following a comprehensive risk assessment.
This standard primarily specifies minimum safety requirements for the protection of the upper head. Requirements for the protection of the lower face and the neck, where relevant, are covered by other European standards, which are referenced in this standard. However helmets incorporating means of protecting the firefighters lower face and neck are not excluded from complying with this standard.
Figures 1 to 5 are integral parts of this standard.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    41 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14458:2018/oprA1:2019(Amendment)
Personal eye-equipment - High performance visors intended only for use with protective helmets
EN 14458:2018/prA1

This European Standard specifies the minimum requirements for visors designed specifically to be used only with protective helmets, including but not limited to those conforming to EN 443, EN 14052, EN 16471 and EN 16473 as the situation dictates. These visors may be permanently fitted to, or removable from, the helmet. See the scope of the various helmet standards for applications.
These visors are not intended to protect against smoke and gas /vapour hazards.
Three types of visors in two forms are described in this document.
The two forms are:
-   face guards provide both eye and face protection, and
-   eye guards that are shorter and effectively provide only eye protection.
The three types are:
-   Visors for general use: Eye guards and face guards providing resistance and/or protection against mechanical, liquid chemical and basic physical hazards.
-   Visors with increased thermal performance: Face guards that additionally provide resistance and/or protection against higher than basic levels of heat and flame. This additional requirement is not applicable for eye guards.
-   Mesh visors: Eye guards and face guards that incorporate mesh oculars with defined levels of performance from EN 1731, and other additional mechanical requirements described in this standard.
Visors for sporting use, those with corrective effect, and goggles used with a protective helmet are not covered by this standard.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14458:2018(Main)
Personal eye-equipment - High performance visors intended only for use with protective helmets
EN 14458:2018

This European Standard specifies the minimum requirements for visors designed specifically to be used only with protective helmets, including but not limited to those conforming to EN 443, EN 14052, EN 16471 and EN 16473 as the situation dictates. These visors may be permanently fitted to, or removable from, the helmet. See the scope of the various helmet standards for applications.
These visors are not intended to protect against smoke and gas /vapour hazards.
Three types of visors in two forms are described in this document.
The two forms are:
-   face guards provide both eye and face protection, and
-   eye guards that are shorter and effectively provide only eye protection.
The three types are:
-   Visors for general use: Eye guards and face guards providing resistance and/or protection against mechanical, liquid chemical and basic physical hazards.
-   Visors with increased thermal performance: Face guards that additionally provide resistance and/or protection against higher than basic levels of heat and flame. This additional requirement is not applicable for eye guards.
-   Mesh visors: Eye guards and face guards that incorporate mesh oculars with defined levels of performance from EN 1731, and other additional mechanical requirements described in this standard.
Visors for sporting use, those with corrective effect, and goggles used with a protective helmet are not covered by this standard.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13911:2017(Main)
Protective clothing for firefighters - Requirements and test methods for fire hoods for firefighters
EN 13911:2017

This standard specifies minimum safety requirements and test methods for a firehood to be worn during firefighting operations and associated activities. This standard only applies in situations when protective clothing (EN 469), breathing apparatus (EN 136 and EN 137), and helmet (EN 443) are also worn.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16471:2015(Main)
Firefighters helmets - Helmets for wildland fire fighting
EN 16471:2014

This European Standard specifies the minimum requirements for wildland fire fighting helmets protecting the upper head mainly against the effects of impact, penetration, heat, flame and burning embers whilst conducting fire fighting and associated activities in wildland environments. Requirements for marking and information to be supplied by the manufacturer are included. Wildland fire fighting involves direct and indirect attack techniques (like wood cutting). This helmet is not intended to provide protection during fire entrapment.
Wildland environments include forests, crops, plantations and grass/heath/scrub or farmland.
Helmets for use whilst fire fighting in buildings and other structures are not covered by this European Standard (see EN 443).
Protection of the face, eyes, ears and neck may require additional items of PPE, which are not covered by this European Standard.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16473:2015(Main)
Firefighters helmets - Helmets for technical rescue
EN 16473:2014

This European Standard specifies the minimum requirements for technical rescue helmets. These helmets are intended to protect the upper head mainly against the effects of mechanical hazards such as impact and penetration, flame, electrical and chemical hazards whilst conducting technical rescue and associated activities.
Technical rescues involves work associated with the environments and conditions associated with operational scenarios such as but not limited to those found during road traffic collisions and when working in and around collapsed structures often for extended periods of time after natural disasters (flood, earthquake, etc.)
Requirements for marking and information to be supplied by the manufacturer are included.
Helmets for use whilst firefighting in buildings and other structures or in wildland firefighting environments, are not covered by this European Standard, see EN 443 and EN 16471.
Helmets for use in water rescue operations using craft are also not covered by this European Standard.
Protection of the face, eyes, ears and neck may require additional items of PPE, which are not covered by this European Standard.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day