SIST EN 50130-4:2011/A1:2014

Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems

This EMC product-family standard, for immunity requirements, applies to the components of the following alarm systems, intended for use in and around buildings in residen¬tial, commercial, light industrial and industrial environments:
–   access control systems, for security applications;
–   alarm transmission systems 1);
–   CCTV systems, for security applications;
–   fire detection and fire alarm systems;
–   hold-up alarm systems;
–   intruder alarm systems;
–   social alarm systems;
The tests and severities to be used are the same for indoor and outdoor applications of fixed, movable and portable equipment.
The levels do not cover extreme cases, which may occur in any location, but with an extremely low probability of occurrence, or in special locations close to powerful emitters (e.g. radar transmitters).
Equipment within the scope of this standard should be designed in order to operate satisfactorily in the environmental electromagnetic conditions of residential, commercial, light industrial and industrial environments. This implies particularly that it should be able to operate correctly within the conditions fixed by the electromagnetic compatibility levels for the various disturbances on the low voltage public supply system as defined by EN 61000 2 2. The immunity tests in this standard only concern the most critical disturbance phenomena.
For equipment using radio signalling, mains signalling or with connections to the public telephone system, additional requirements, from other standards specific to these signalling media, might apply.
This standard does not specify basic safety requirements, such as protection against electrical shocks, unsafe operation, insulation coordination and related dielectric tests.
This standard does not cover EMC emission requirements. These are covered by other appropriate standards.

Alarmanlagen - Teil 4: Elektromagnetische Verträglichkeit - Produktfamiliennorm: Anforderungen an die Störfestigkeit von Anlageteilen für Brandmeldeanlagen, Einbruch- und Überfallmeldeanlagen, Video-Überwachungsanlagen, Zutrittskontrollanlagen sowie Personen-Hilferufanlagen

Systèmes d’alarme - Partie 4: Compatibilité électromagnétique - Norme de famille de produits: Exigences relatives à l’immunité des composants des systèmes d’alarme de détection d’incendie, contre l’intrusion, contre les hold-up, CCTV, de contrôle d’accès et d’alarme sociale

Alarmni sistemi - 4. del: Elektromagnetna združljivost - Standard za varnost proizvodov - Zahteve za odpornost sestavnih komponent požarnih, vlomnih, nadzornih in socialnih alarmnih sistemov - Dopolnilo A1

General Information

• Status: Published
• Publication Date: 23-Nov-2014
• ICS: 13.320 - Alarm and warning systems
• ICS: 33.100.20 - Immunity
• Technical Committee: EAL - Alarm systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 12-Nov-2014
• Due Date: 17-Jan-2015
• Completion Date: 24-Nov-2014
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Directive: TP103 - Pravilnik o železniškem telekomunikacijskem omrežju
• Ref Project: EN 50130-4:2011/A1:2014 - Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems

Relations

• Amends: SIST EN 50130-4:2011 - Alarm systems -- Part 4: Electromagnetic compatibility - Product family standard - Immunity requirements for components of fire, intruder and social alarm systems
• Effective Date: 01-Dec-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50130-4:2011/A1:2014
01-december-2014
Alarmni sistemi - 4. del: Elektromagnetna združljivost - Standard za varnost
proizvodov - Zahteve za odpornost sestavnih komponent požarnih, vlomnih,
nadzornih in socialnih alarmnih sistemov - Dopolnilo A1
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard:
Immunity requirements for components of fire, intruder, hold up, CCTV, access control
and social alarm systems
Alarmanlagen - Teil 4: Elektromagnetische Verträglichkeit - Produktfamiliennorm:
Anforderungen an die Störfestigkeit von Anlageteilen für Brandmeldeanlagen, Einbruch-
und Überfallmeldeanlagen, Video-Überwachungsanlagen, Zutrittskontrollanlagen sowie
Personen-Hilferufanlagen
Systèmes d’alarme - Partie 4: Compatibilité électromagnétique - Norme de famille de
produits: Exigences relatives à l’immunité des composants des systèmes d’alarme de
détection d’incendie, contre l’intrusion, contre les hold-up, CCTV, de contrôle d’accès et
d’alarme sociale
Ta slovenski standard je istoveten z: EN 50130-4:2011/A1:2014
ICS:
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
33.100.20 Imunost Immunity
SIST EN 50130-4:2011/A1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50130-4:2011/A1:2014

---------------------- Page: 2 ----------------------

SIST EN 50130-4:2011/A1:2014


EUROPEAN STANDARD EN 50130-4:2011/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2014
ICS 13.320; 29.020

English Version
Alarm systems - Part 4: Electromagnetic compatibility - Product
family standard: Immunity requirements for components of fire,
intruder, hold up, CCTV, access control and social alarm
systems
Systèmes d'alarme - Partie 4: Compatibilité Alarmanlagen - Teil 4: Elektromagnetische Verträglichkeit -
électromagnétique - Norme de famille de produits: Produktfamiliennorm: Anforderungen an die Störfestigkeit
Exigences relatives à l'immunité des composants des von Anlageteilen für Brandmeldeanlagen, Einbruch- und
systèmes d'alarme de détection d'incendie, contre Überfallmeldeanlagen, Video-Überwachungsanlagen,
l'intrusion, contre les hold-up, CCTV, de contrôle d'accès et Zutrittskontrollanlagen sowie Personen-Hilferufanlagen
d'alarme sociale
This amendment A1 modifies the European Standard EN 50130-4:2011; it was approved by CENELEC on 2014-08-11. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnisch
...