SIST EN 688:2011
(Main)Resilient floor coverings - Specification for corklinoleum
Resilient floor coverings - Specification for corklinoleum
This European Standard specifies the characteristics of corklinoleum, supplied in roll form.
To encourage the consumer to make an informed choice, the standard includes a classification system based on intensity of use, which shows where resilient floor coverings should give satisfactory service (see EN 685). It also includes requirements for marking.
The term 'linoleum' is frequently incorrectly applied to a range of floor coverings, often to those based on polyvinyl chloride or rubber. Such materials are excluded from this standard.
Elastische Bodenbeläge - Spezifikation für Korklinoleum
Diese Europäische Norm legt die Eigenschaften von Korklinoleum fest, das in Form von Rollen geliefert wird.
Um den Verbraucher bei seiner Auswahl zu unterstützen, enthält diese Norm ein Klassifizierungssystem (siehe EN 685) auf Basis der Nutzungsintensität, das zeigt, wo für diese Bodenbeläge ein zufriedenstellender Nutzen möglich wäre. Die Norm legt auch die Anforderungen zur Kennzeichnung fest.
Der Begriff „Linoleum“ wird häufig fälschlicherweise auch für andere Bodenbeläge, oft für solche auf Basis von Polyvinylchlorid oder Elastomeren, verwendet. Derartige Materialien sind nicht in dieser Norm einge-schlossen.
Revêtements de sol résilients - Spécifications pour le linoléum sur liège
La présente Norme européenne spécifie les caractéristiques du linoléum sur liège, fourni sous forme de
rouleaux.
Pour aider le consommateur à faire un choix éclairé, la présente norme inclut un système de classification
basé sur l'intensité d'utilisation, qui indique l'endroit où il convient que ces revêtements de sol résilients
rendent un service satisfaisant (voir l'EN 685). Elle inclut également les exigences relatives au marquage.
Le terme «linoléum» est fréquemment appliqué à tort à une gamme de revêtements de sol, souvent à base de
polychlorure de vinyle ou de caoutchouc. De tels produits sont exclus de la présente norme.
Netekstilne talne obloge - Specifikacija plutovinastih linolejev
Ta evropski standard določa značilnosti plutovinastih linolejev, ki so na voljo v zvitkih.
Da bi ta evropski standard potrošnike spodbujal k sprejemanju utemeljenih odločitev, vsebuje klasifikacijski sistem, temelječ na intenzivnosti uporabe, ki kaže, kje bi se te netekstilne talne obloge lahko zadovoljivo uporabljale (glej EN 685). Vključuje tudi zahteve za označevanje.
Izraz »linolej« se večkrat nepravilno uporablja za različne talne obloge, pogosto za talne obloge na osnovi polivinil klorida ali gume. Ta standard ne vključuje takih materialov.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Netekstilne talne obloge - Specifikacija plutovinastih linolejevElastische Bodenbeläge - Spezifikation für KorklinoleumRevêtements de sol résilients - Spécifications pour le linoléum sur liègeResilient floor coverings - Specification for corklinoleum97.150Netekstilne talne oblogeNon-textile floor coverings79.100Pluta in izdelki iz pluteCork and cork productsICS:Ta slovenski standard je istoveten z:EN 688:2011SIST EN 688:2011en,fr,de01-september-2011SIST EN 688:2011SLOVENSKI
STANDARDSIST EN 688:19991DGRPHãþD
SIST EN 688:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 688
April 2011 ICS 97.150 Supersedes EN 688:1997English Version
Resilient floor coverings - Specification for corklinoleum
Revêtements de sol résilients - Spécifications pour le linoléum sur liège
Elastische Bodenbeläge - Spezifikation für Korklinoleum This European Standard was approved by CEN on 10 March 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 688:2011: ESIST EN 688:2011
EN 688:2011 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .54 Identification .55 Requirements .55.1 General requirements .55.2 Classification requirements .86 Marking .8Annex A (informative)
Optional properties .9Bibliography . 10 SIST EN 688:2011
EN 688:2011 (E) 3 Foreword This document (EN 688:2011) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 688:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 688:2011
EN 688:2011 (E) 4 1 Scope This European Standard specifies the characteristics of corklinoleum, supplied in roll form. To encourage the consumer to make an informed choice, the standard includes a classification system based on intensity of use, which shows where resilient floor coverings should give satisfactory service (see EN 685). It also includes requirements for marking. The term 'linoleum' is frequently incorrectly applied to a range of floor coverings, often to those based on polyvinyl chloride or rubber. Such materials are excluded from this standard. 2 Normative references The following referenced documents are indispensable for the application of this do
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Netekstilne talne obloge - Specifikacija plutovinastih linolejevElastische Bodenbeläge - Spezifikation für KorklinoleumRevêtements de sol résilients - Spécifications pour le linoléum sur liègeResilient floor coverings - Specification for corklinoleum97.150Netekstilne talne oblogeNon-textile floor coveringsICS:Ta slovenski standard je istoveten z:FprEN 688kSIST FprEN 688:2010en,de01-november-2010kSIST FprEN 688:2010SLOVENSKI
STANDARD
kSIST FprEN 688:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 688
September 2010 ICS 97.150 Will supersede EN 688:1997English Version
Resilient floor coverings - Specification for corklinoleum
Revêtements de sol résilients - Spécifications pour le linoléum sur liège
Elastische Bodenbeläge - Spezifikation für Korklinoleum This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 134.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 688:2010: EkSIST FprEN 688:2010
FprEN 688:2010 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .54 Identification .55 Requirements .55.1 General requirements .55.2 Classification requirements .86 Marking .8Annex A (informative)
Optional properties .9Bibliography . 10 kSIST FprEN 688:2010
FprEN 688:2010 (E) 3 Foreword This document (FprEN 688:2010) has been prepared by Technical Committee CEN/TC 134 “Resilient, textile and laminate floor coverings”, the secretariat of which is held by BSI. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 688:1997. kSIST FprEN 688:2010
FprEN 688:2010 (E) 4 1 Scope This European Standard specifies the characteristics of corklinoleum, supplied in roll form. To encourage the consumer to make an informed choice, the standard includes a classification system based on intensity of use, which shows where resilient floor coverings should give satisfactory service (see EN 685). It also includes requirements for marking. The term 'linoleum' is frequently incorrectly applied to a range of floor coverings, often to those based on polyvinyl chloride or rubber. Such materials are excluded from this standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 426, Resilient floor coverings — Determination of width, length, straightness and flatness of sheet material EN 428, Resilient floor coverings —- Determination of overall thickness EN 429, Resilient floor coverings — Determi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.