Aerospace series - Embedded tags - Choice of fixation for installation, removal and replacement of embedded tags

This document is applicable in the aeronautical domain to on-board parts and to equipment intended to be embedded or positioned on any civil or military airborne vehicle with a type certificate.
The purpose of this document is to guide design, manufacturing, maintenance and operations organizations in the installation, removal and replacement of RFID tags (UHF and HF) and Contact Memory Buttons (CMB), according to the environments defined in RTCA DO-160/EUROCAE ED-14 and according to the type of support and the expected fixation performances. This guide will provide help in the specification of the tag installation/removal functions and/or will enable the solutions on offer from tag suppliers to be enhanced.
The term "tag" used in this document covers all the tags used to store electronic data, including RFID tags and CMB tags. As a reminder, the tags can also contain information that can be read by devices other than RFID or CMB readers (e.g., bar codes - Data Matrix, QR codes, etc., and/or alphanumerical characters) and information that can be read by the naked eye without any tools (human-readable).

Luft- und Raumfahrt - On-Board-Etiketten - Auswahl der Befestigung zum Anbringen, Entfernen und Ersetzen von On-Board-Etiketten

Série aérospatiale - Étiquettes embarquées - Choix de fixation pour pose, dépose et remplacement d’étiquettes embarquées

Le présent document s'applique, dans le domaine aéronautique, aux pièces embarquées et aux équipements destinés à être incorporés ou positionnés sur tout véhicule aéroporté civil ou militaire disposant d’un certificat de type.
L’objectif de ce document est de guider les organismes de conception, de fabrication, de maintenance et d’exploitation pour la pose, la dépose et le remplacement des étiquettes RFID (UHF et HF) et des Contact Memory Button (CMB), en fonction des environnements définis dans la RTCA DO-160/EUROCAE ED-14 et selon le type de supports, ainsi que les performances de fixation attendues. Ce guide fournira une aide à la spécification des fonctions pose/dépose de l’étiquette et/ou permettra d’approfondir les solutions proposées par les fournisseurs d’étiquettes.
Le terme « étiquette » utilisé dans le présent document couvre à la fois l’ensemble des étiquettes de stockage de données électroniques et parmi celles-ci les étiquettes RFID et les étiquettes CMB. Pour rappel, les étiquettes peuvent aussi contenir des informations lisibles par un autre média que le lecteur RFID ou CMB (par exemple : code à barres – Data Matrix, QR code, etc. et/ou caractères alphanumériques) ainsi que des informations lisibles à l’œil nu sans outillage (human readable).

Aeronavtika - Vgrajene oznake - Možnost izbire pritrditve za namestitev, odstranitev in zamenjavo vgrajenih oznak

General Information

Status
Not Published
Public Enquiry End Date
15-Nov-2022
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
31-Aug-2022
Due Date
18-Jan-2023
Completion Date
21-Nov-2022

Buy Standard

Draft
oSIST prEN 4906:2022 - BARVE
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4906:2022
01-oktober-2022
Aeronavtika - Vgrajene oznake - Možnost izbire pritrditve za namestitev,
odstranitev in zamenjavo vgrajenih oznak

Aerospace series - Embedded tags - Choice of fixation for installation, removal and

replacement of embedded tags

Luft- und Raumfahrt - On-Board-Etiketten - Auswahl der Befestigung zum Anbringen,

Entfernen und Ersetzen von On-Board-Etiketten

Série aérospatiale - Étiquettes embarquées - Choix de fixation pour pose, dépose et

remplacement d’étiquettes embarquées
Ta slovenski standard je istoveten z: prEN 4906
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
49.035 Sestavni deli za letalsko in Components for aerospace
vesoljsko gradnjo construction
oSIST prEN 4906:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 4906:2022
---------------------- Page: 2 ----------------------
oSIST prEN 4906:2022
DRAFT
EUROPEAN STANDARD
prEN 4906
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2022
ICS 49.035; 35.240.60
English Version
Aerospace series - Embedded tags - Choice of fixation for
installation, removal and replacement of embedded tags

Série aérospatiale - Étiquettes embarquées - Choix de Luft- und Raumfahrt - On-Board-Etiketten - Auswahl

fixation pour pose, dépose et remplacement der Befestigung zum Anbringen, Entfernen und

d'étiquettes embarquées Ersetzen von On-Board-Etiketten

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-

STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4906:2022 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4906:2022
prEN 4906:2022 (E)
Contents Page

European foreword ...................................................................................................................................................... 5

1 Scope .................................................................................................................................................................... 6

2 Normative references .................................................................................................................................... 6

3 Terms and definitions ................................................................................................................................... 7

4 List of acronyms .............................................................................................................................................. 8

5 General remarks ............................................................................................................................................. 8

5.1 General................................................................................................................................................................ 8

5.2 Choosing the tag ............................................................................................................................................ 10

5.3 Shape of the support .................................................................................................................................... 10

5.4 Size of the support ........................................................................................................................................ 10

5.5 Orientation ...................................................................................................................................................... 10

5.6 Temperature................................................................................................................................................... 10

5.7 Integrity of the tags ...................................................................................................................................... 11

5.8 Non-reuse of tags .......................................................................................................................................... 11

5.9 Resistance to cleaning and maintenance operations ...................................................................... 11

5.10 Risk of projection .......................................................................................................................................... 11

5.11 Flammability ................................................................................................................................................... 11

5.12 Degassing/toxicity ........................................................................................................................................ 11

6 Types/methods of fixation ........................................................................................................................ 12

6.1 Introduction .................................................................................................................................................... 12

6.2 Bonding ............................................................................................................................................................ 12

6.2.1 Types of bonding ........................................................................................................................................... 12

6.2.2 The advantages of bonding ....................................................................................................................... 13

6.2.3 The disadvantages of bonding.................................................................................................................. 13

6.2.4 Remarks ........................................................................................................................................................... 13

6.3 Mechanical fixation ...................................................................................................................................... 14

6.3.1 General.............................................................................................................................................................. 14

6.3.2 Screwing ........................................................................................................................................................... 14

6.3.3 Riveting ............................................................................................................................................................. 15

6.3.4 Stapling ............................................................................................................................................................. 16

6.3.5 Crimping ........................................................................................................................................................... 16

6.3.6 Pinching ............................................................................................................................................................ 16

6.3.7 Fixation using plastic collars .................................................................................................................... 16

6.4 Fixation to textiles ........................................................................................................................................ 17

6.5 Fixation in pouches ...................................................................................................................................... 19

6.6 Welding ............................................................................................................................................................. 20

6.7 Incorporated in the container .................................................................................................................. 21

6.8 Fixation by magnets ..................................................................................................................................... 21

6.9 Fixation by clips ............................................................................................................................................. 22

7 Selection method........................................................................................................................................... 22

8 Bonding ............................................................................................................................................................ 23

8.1 Location of the tag on the airborne vehicle ......................................................................................... 23

8.2 Nature of the surface ................................................................................................................................... 24

---------------------- Page: 4 ----------------------
oSIST prEN 4906:2022
prEN 4906:2022 (E)

8.3 Temperature .................................................................................................................................................. 24

8.4 Vibrations/shocks/constant acceleration ........................................................................................... 24

8.5 Sensitivity to fluids, fungus, salt spray, humidity, immersion, icing, sand and dust ............ 24

8.6 Tearing-off (aerodynamic air flows, maintenance operations, etc.) ......................................... 25

8.7 UV/Light ........................................................................................................................................................... 25

8.8 Lifespan ............................................................................................................................................................ 25

8.9 Replacement ................................................................................................................................................... 26

9 Screwing, riveting and nailing ................................................................................................................. 26

9.1 Location of the tag ........................................................................................................................................ 26

9.2 Nature of the surface ................................................................................................................................... 26

9.3 Temperature .................................................................................................................................................. 26

9.4 Vibrations/shocks/constant acceleration ........................................................................................... 26

9.5 Sensitivity to fluids, fungus, salt spray, humidity, icing, sand and dust .................................... 26

9.6 Tearing-off (aerodynamic air flows, handling, etc.)......................................................................... 26

9.7 UV/Light ........................................................................................................................................................... 26

9.8 Lifespan ............................................................................................................................................................ 26

9.9 Replacement ................................................................................................................................................... 26

10 Crimping/Pinching ....................................................................................................................................... 27

10.1 Location of the tag ........................................................................................................................................ 27

10.2 Nature of the surface ................................................................................................................................... 27

10.3 Temperature .................................................................................................................................................. 27

10.4 Vibrations/shocks/constant acceleration ........................................................................................... 27

10.5 Sensitivity to fluids, fungus, salt spray, humidity, icing, sand and dust .................................... 27

10.6 Tearing-off (aerodynamic air flows, handling, etc.)......................................................................... 27

10.7 UV/Light ........................................................................................................................................................... 27

10.8 Lifespan ............................................................................................................................................................ 27

10.9 Replacement ................................................................................................................................................... 27

11 Wrapping and fixation with collars........................................................................................................ 28

11.1 Location of the tag on the airborne vehicle ......................................................................................... 28

11.2 Nature of the surface ................................................................................................................................... 28

11.3 Temperature .................................................................................................................................................. 28

11.4 Vibrations/shocks/constant acceleration ........................................................................................... 28

11.5 Sensitivity to fluids, fungus, salt spray, humidity, icing, sand and dust .................................... 28

11.6 Tearing-off (aerodynamic air flows, handling, etc.)......................................................................... 28

11.7 UV/Light ........................................................................................................................................................... 28

11.8 Lifespan ............................................................................................................................................................ 28

11.9 Replacement ................................................................................................................................................... 28

12 Braiding/weaving ......................................................................................................................................... 28

12.1 Location of the tag on the airborne vehicle ......................................................................................... 28

12.2 Nature of the surface ................................................................................................................................... 28

12.3 Temperature .................................................................................................................................................. 28

12.4 Vibrations/shocks/constant acceleration ........................................................................................... 29

12.5 Sensitivity to fluids, fungus, salt spray, humidity, icing, sand and dust .................................... 29

12.6 Tearing-off (aerodynamic air flows, handling, etc.)......................................................................... 29

12.7 UV/Light ........................................................................................................................................................... 29

12.8 Lifespan ............................................................................................................................................................ 29

12.9 Replacement ................................................................................................................................................... 29

13 Welding ............................................................................................................................................................ 29

13.1 Location of the tag on the airborne vehicle ......................................................................................... 29

13.2 Nature of the surface ................................................................................................................................... 29

13.3 Temperature .................................................................................................................................................. 29

---------------------- Page: 5 ----------------------
oSIST prEN 4906:2022
prEN 4906:2022 (E)

13.4 Vibrations/shocks/constant acceleration ........................................................................................... 29

13.5 Sensitivity to fluids, fungus, salt spray, humidity, icing, sand and dust .................................... 29

13.6 Tearing-off (aerodynamic air flows, handling, etc.) ......................................................................... 29

13.7 UV/Light ........................................................................................................................................................... 29

13.8 Lifespan ............................................................................................................................................................ 29

13.9 Replacement ................................................................................................................................................... 30

14 Coated bonding .............................................................................................................................................. 30

14.1 Location of the tag on the airborne vehicle ......................................................................................... 30

14.2 Nature of the surface ................................................................................................................................... 30

14.3 Temperature................................................................................................................................................... 30

14.4 Vibrations/shocks/constant acceleration ........................................................................................... 30

14.5 Sensitivity to fluids, fungus, salt spray, humidity, icing, sand and dust .................................... 30

14.6 Tearing-off (aerodynamic air flows, handling, etc.) ......................................................................... 30

14.7 UV/Light ........................................................................................................................................................... 30

14.8 Lifespan ............................................................................................................................................................ 30

14.9 Replacement ................................................................................................................................................... 30

Bibliography ................................................................................................................................................................. 31

---------------------- Page: 6 ----------------------
oSIST prEN 4906:2022
prEN 4906:2022 (E)
European foreword

This document (prEN 4906:2022) has been prepared by the Aerospace and Defence Industries

Association of Europe — Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this document has

received the approval of the National Associations and the Official Services of the member countries of

ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.

Any feedback and questions on this document should be directed to the users’ national standards body.

A complete listing of these bodies can be found on the CEN website.
---------------------- Page: 7 ----------------------
oSIST prEN 4906:2022
prEN 4906:2022 (E)
1 Scope

This document is applicable in the aeronautical domain to on-board parts and to equipment intended to

be embedded or positioned on any civil or military airborne vehicle with a type certificate.

The purpose of this document is to guide design, manufacturing, maintenance and operations

organizations in the installation, removal and replacement of RFID tags (UHF and HF) and Contact

Memory Buttons (CMB), according to the environments defined in RTCA DO-160/EUROCAE ED-14 and

according to the type of support and the expected fixation performances. This guide will provide help in

the specification of the tag installation/removal functions and/or will enable the solutions on offer from

tag suppliers to be enhanced.

The term “tag” used in this document covers all the tags used to store electronic data, including RFID tags

and CMB tags. As a reminder, the tags can also contain information that can be read by devices other than

RFID or CMB readers (e.g. bar codes - Data Matrix, QR codes, etc., and/or alphanumerical characters) and

information that can be read by the naked eye without any tools (human-readable).

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN 1464, Adhesives — Determination of peel resistance of adhesive bonds — Floating roller method

EN 1465, Adhesives — Determination of tensile lap-shear strength of bonded assemblies

EN 4817, Aerospace series — Passive UHF RFID tags intended for aircraft use
EN 4818, Aerospace series — Passive HF RFID tags intended for aircraft use

EN 4819, Aerospace series — Contact Memory Button (CMB) tags intended for aircraft use

EN ISO 11343, Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive

bonds under impact wedge conditions — Wedge impact method (ISO 11343)

ISO 4578, Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-

roller method

RTCA DO-160G/EUROCAE ED-14G, Environmental Conditions and Test Procedures for Airborne

Equipment
SAE AS 5678B, Passive RFID Tags Intended for Airborne Equipment Use
SAE AS 6023, Active and Battery Assisted Passive Tags Intended for Aircraft Use

Published by: the International Organization for Standardization (ISO), https://www.iso.org/.

Published by: SAE International (US) Society of Automotive Engineers, https://www.sae.org/.

---------------------- Page: 8 ----------------------
oSIST prEN 4906:2022
prEN 4906:2022 (E)
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

• ISO Online browsing platform: available at https://www.iso.org/obp/ui
• IEC Electropedia: available at https://www.electropedia.org/
3.1
airborne vehicule
any machine capable of taking off and flying in the air
3.2
surface tension
physical-chemical phenomenon related to the molecular interactions of a fluid

Note 1 to entry: It results from the increase in the energy at the interface between two fluids. The system tends

towards an equilibrium corresponding to the lowest-energy configuration and therefore modifies its geometry to

reduce the surface area of this interface. The force that maintains the system in this configuration is the surface

tension.
3.3
primer

material added to make smooth coatings more adhesive to facilitate the application of the second coat

(glue, paint, etc.)
3.4
orientation
relative position of an item of equipment
EXAMPLE upright, on its side, upside down
Note 1 to entry: The orientation can affect the reading of tags.
3.5
certification

any form of recognition in accordance with a regulation or a standard based on an appropriate

assessment, certifying that a person or organization, a product, a part, or non-fixed equipment meets the

applicable requirements of this regulation or this document, as well as the delegated acts and the

implementing acts adopted on the basis thereof, through the issue of a certificate testifying this

conformity
3.6
declaration

any written declaration made under the sole responsibility of a person or an organization confirming that

the applicable requirements of a regulation or a standard, as well as the delegated acts and the

implementing acts adopted on the basis thereof and pertaining to a person or an organization, a product,

a part, or non-fixed equipment, are met
3.7
equipment

any instrument, mechanism, machine, auxiliary device, software or accessory transported onboard an

airborne vehicle by the airborne vehicle operator, which is not a part and which is used, or intended to

---------------------- Page: 9 ----------------------
oSIST prEN 4906:2022
prEN 4906:2022 (E)

be used, to operate or control the airborne vehicle, that contributes to the survivability of the persons

onboard or that has on influence on the operation of the airborne vehicle in complete safety

3.8
counterboring

machining operation consisting of counterboring a part, in particular to produce the bearing surface of a

nut, washer, etc
3.9
peeling
action consisting of detaching a coating from its support
3.10
part

any element of an item of equipment, as defined by the type design of the product

3.11
product
airborne vehicle, engine, propeller; or one of these components
3.12
support
physical part of an item of equipment or a part on which the tag is positioned
3.13
environmental protection

measures guaranteeing that the property, persons and organizations taking part in civil aviation activities

in the Union obey the applicable law of the Union, meet the international standards and adopt the

recommended practices
4 List of acronyms
For the purposes of this document, the following acronyms apply.
APU Auxiliary Power UNIT
CMB Contact Memory Button
HF High Frequency
RFID Radio Frequency IDentification
RCTA Radio Technical Commission for Aeronautics
UHF Ultra-High Frequency
UV UltraViolet
5 General remarks
5.1 General

The fixation of the tag to a product, item of equipment or part shall ensure that the tag remains affixed to

the product, item of equipment or part for a given duration that is consistent with the lifespan of the

product, item of equipment or part, while the tag remains operational (i.e. the tag remains readable/re-

writeable) or up to its replacement if failed.
---------------------- Page: 10 ----------------------
oSIST prEN 4906:2022
prEN 4906:2022 (E)

The methods used to install tags vary according to the shape, size, type of material and texture of the

equipment, and to the environmental conditions under which the equipment will be monitored.

The tags shall be compatible with the intended type of fixation. The technical documentation provided by

the manufacturer usually contains this type of information.
The main criteria to be taken into consideration are as follows:

— the shape of the surface to which the tag will be affixed (flat, cylindrical, etc.), which shall meet the

manufacturer’s recommendations in terms of the flatness or the curvature of the surface;

— the size of the equipment to be identified and the area available to install the tag;

— the material of the surface of the equipment to be tagged, such as metal, plastic or textile fabric, etc.;

— the length of time for which the equipment shall be tagged (short or long term, permanent or

temporary);
— the length of time for which the e
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.