SIST EN 1034-1:2000/kFprA1:2009

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements

Sicherheit von Maschinen - Sicherheitstechnische Anforderungen für Konstruktion und Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 1: Gemeinsame Anforderungen

Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines de fabrication et de finition du papier - Partie 1: Prescriptions communes

Varnost strojev - Varnostne zahteve za načrtovanje in konstrukcijo strojev in opreme za izdelavo papirja - 1. del: Splošne zahteve

General Information

• Status: Not Published
• Public Enquiry End Date: 30-Nov-2009
• ICS: 13.110 - Safety of machinery
• ICS: 21.020 - Characteristics and design of machines, apparatus, equipment
• ICS: 85.100 - Equipment for the paper industry
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 10-Oct-2019
• Due Date: 15-Oct-2019
• Completion Date: 10-Oct-2019
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 1034-1:2000/FprA1 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements

Relations

• Consolidated By: SIST EN 1034-1:2000+A1:2010 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
• Effective Date: 01-May-2010
• Amends: SIST EN 1034-1:2000 - Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements
• Effective Date: 01-Nov-2009

Overview

SIST EN 1034-1:2000/kFprA1:2009:2009 is a European standard developed by CEN Technical Committee 198, focusing on the safety of machinery specifically for the design and construction of paper making and finishing machines. This standard establishes common safety requirements that manufacturers and designers must integrate to ensure machinery safety during operation, maintenance, and servicing.

Designed to support compliance with the EU Machinery Directive 2006/42/EC and related regulations, this standard provides crucial guidance to reduce risks associated with paper industry equipment. It applies broadly to various machine types involved in paper manufacturing, finishing, coating, tissue production, and related processes.

Key Topics

Safety Design Principles

• Implementation of basic concepts aligned with EN ISO 12100, focusing on risk assessment, control measures, and ergonomic considerations.
• Incorporation of safeguarding measures such as guards, protective devices, and emergency stops designed according to up-to-date safety principles.

Safety-Related Control Systems

• Use of functional safety standards like EN ISO 13849-1:2008 and EN 62061:2005 for control components, emphasizing required Safety Integrity Levels (SIL) and Performance Levels (PL).
• Integration of safety devices such as emergency stops compliant with EN ISO 13850:2008, ensuring constant operability regardless of operating mode.

Protective Equipment and Guards

• Secure attachment and design of guards that also prevent exposure to hazards including ejected materials and machinery emissions (noise, thermal surfaces).
• Use of safety distances and access means following standards like EN ISO 13857:2008 and EN ISO 14122 series for stairs, ladders, and guard rails.

Ergonomics and User Safety

• Machines must be designed to avoid awkward postures and excessive manual handling, applying recommendations from EN 614-1, EN 614-2, and ergonomic norms in the EN 1005 and EN 894 series.
• Risk mitigation related to thermal contact hazards based on EN ISO 13732-1:2008.

Marking and Documentation

• Clear markings on machines including manufacturer details, serial number, and year of construction for traceability and safety information.
• Comprehensive instruction manuals adhering to EN ISO 12100-2 guidelines, covering intended use, safety functions, emergency procedures, and handling of non-ionising radiation.

Compatibility with Other Standards

• Extensions and updates to referenced standards ensure harmonization with current EU and international safety frameworks.
• Includes references to EN 809 for pumps used in paper making, fire prevention guidelines from EN 13478, noise measurement standards like EN 13023:2003, and electrical safety pursuant to EN 60204-1:2006.

Applications

SIST EN 1034-1:2000/kFprA1:2009 is applicable to a broad range of machinery in the paper industry, including:

• Paper making machines and associated equipment
• Paper finishing and coating machines
• Tissue making machines
• Machines for de-wiring bales and reel splitting
• Wood grinders used in paper production
• Auxiliary equipment such as pumps, conveyors, and circuitry linked to paper processing

This standard is essential for manufacturers, safety engineers, machine designers, and compliance officers seeking to ensure that paper machinery meets the highest safety benchmarks recognized across the European Union and other regions adopting CEN standards.

Related Standards

For a comprehensive safety management approach in paper machine design, the following related standards are critical:

• EN ISO 12100:2010 – Safety of machinery: Basic concepts and general principles
• EN ISO 13849-1:2008 – Safety-related parts of control systems
• EN 62061:2005 – Functional safety of electrical, electronic control systems
• EN ISO 14122 series – Permanent means of access to machinery
• EN ISO 13857:2008 – Safety distances to prevent hazard zones being reached
• EN ISO 13850:2008 – Emergency stop design principles
• EN 60204-1:2006 – Electrical equipment of machines - General requirements
• EN 809 – Safety requirements for pumps and pump units
• EN 13478 – Fire prevention and protection in machinery
• EN 13023:2003 – Noise measurement methods for paper machinery

Implementing SIST EN 1034-1:2000/kFprA1:2009 alongside these standards enables a robust safety framework tailored specifically to the complexities and risks inherent in paper production machinery, ensuring operators' safety, operational reliability, and regulatory compliance.

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2009
9DUQRVWVWURMHY9DUQRVWQH]DKWHYH]DQDþUWRYDQMHLQNRQVWUXNFLMRVWURMHYLQ
RSUHPH]DL]GHODYRSDSLUMDGHO6SORãQH]DKWHYH
Safety of machinery - Safety requirements for the design and construction of paper
making and finishing machines - Part 1: Common requirements
Sicherheit von Maschinen - Sicherheitstechnische Anforderungen für Konstruktion und
Bau von Maschinen der Papierherstellung und Ausrüstung - Teil 1: Gemeinsame
Anforderungen
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction
de machines de fabrication et de finition du papier - Partie 1: Prescriptions communes
Ta slovenski standard je istoveten z: EN 1034-1:2000/FprA1
ICS:
13.110 Varnost strojev Safety of machinery
21.020 =QDþLOQRVWLLQQDþUWRYDQMH Characteristics and design of
VWURMHYDSDUDWRYRSUHPH machines, apparatus,
equipment
85.100 Oprema za papirno industrijo Equipment for the paper
industry
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 1034-1:2000
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
July 2009
ICS 85.100
English Version
Safety of machinery - Safety requirements for the design and
construction of paper making and finishing machines - Part 1:
Common requirements
Sécurité des machines - Prescriptions de sécurité pour la Sicherheit von Maschinen - Sicherheitstechnische
conception et la construction de machines de fabrication et Anforderungen für Konstruktion und Bau von Maschinen
de finition du papier - Partie 1: Prescriptions communes der Papierherstellung und Ausrüstung - Teil 1:
Gemeinsame Anforderungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 198.
This draft amendment A1, if approved, will modify the European Standard EN 1034-1:2000. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1034-1:2000/FprA1:2009: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Modifications to the Foreword .4
2 Modifications to Clause 2 .4
3 Modification to Clause 3 .5
4 Modification to Clause 4 .5
5 Modifications to Clause 5 .5
6 Modifications to Clause 7 .8
7 Modification to Annex ZA .9
8 Addition of Annex ZB .9
9 Addition of Bibliography . 11
Bibliography . 11

Foreword
This document (EN 1034-1:2000/FprA1:2009) has been prepared by CEN /TC 198 "Printing and paper
machinery — Safety" the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.
1 Modifications to the Foreword
In the list of parts of this European Standard, replace "Part 7: Paper making machines" with "Part 7: Chests".
Add the following parts to the list of parts of this European Standard:
"Part 13: Machines for de-wiring bales and units
Part 14: Reel splitter
Part 16: Paper and board making machines
Part 17: Tissue making machines
Part 21: Coaters
Part 22: Wood grinders".
2 Modifications to Clause 2
st
Replace the 1 paragraph with the following:
"The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies."
Delete EN 292-1:1991 and add "EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general
principles for design — Part 1: Basic terminology, methodology (ISO 12100-1:2003)",
Delete EN 292-2:1991/A1:1995 and add "EN ISO 12100-2:2003, Safety of machinery — Basic concepts,
general principles for design — Part 2: Technical principles (ISO 12100-2:2003)",
Delete EN 294:1992 and add "EN ISO 13857:2008, Safety of machinery — Safety distances to prevent
hazard zones being reached by upper and lower limbs (ISO 13857:2008)",
Delete EN 418 and add "EN ISO 13850:2008, Safety of machinery — Emergency stop — Principles for design
(ISO 13850:2006)",
Delete EN 563 and add "EN ISO 13732-1:2008, Ergonomics of the thermal environment — Methods for the
assessment of human responses to contact with surfaces — Part 1: Hot surfaces (ISO 13732-1:2006)".
Add "EN 809 Pumps and pump units for liquids — Common safety requirements".
Delete EN 954-1 and add "EN ISO 13849-1:2008, Safety of machinery — Safety-related parts of control
systems — Part 1: General principles for design (ISO 13849-1:2006)".
Delete ENV 1070:1993.
Delete prEN 12437-1,
Delete prEN 12437-2,
Delete prEN 12437-3 and add "EN ISO 14122-3, Safety of machinery — Permanent means of access to
machinery — Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001)",
Delete prEN 12437-4 and add "EN ISO 14122-4, Safety of machinery — Permanent means of access to
machinery — Part 4: Fixed Ladders (ISO 14122-4:2004)".
Delete prEN 13023 and add "EN 13023:2003, Noise measurement methods for printing, paper converting,
paper making machines and auxiliary equipment — Accuracy grades 2 and 3".
Delete EN 60204-1:1992 and add "EN 60204-1:2006, Safety of machinery — Electrical equipment of
machines — Part 1: General requirements (IEC 60204-1:2005, modified)",
Delete EN 1050 and add "EN ISO 14121-1:2007, Safety of machinery – Risk assessment – Part 1: Priciples
(ISO 14121-1:2007)".
Delete prEN ISO 11688-1 and add "EN ISO 11688-1:1998, Acoustics – Recommended practice for the design
of low-noise machinery and equipment – Part 1: Planning (ISO/TR 11688-1:1995)".
Add:
"EN 13478:2001, Safety of machinery — Fire prevention and protection",
"EN 61511-1:2004, Functional safety — Safety instrumented systems for the process industry sector —
Part 1: Framework, definitions, system, hardware and software requirements (IEC 61511-1:2003 +
Corrigendum 2004)",
"EN 62061:2005, Safety of machinery — Functional safety of safety-related electrical, electronic and
programmable electronic control systems (IEC 62061:2005)".
3 Modification to Clause 3
st
In the 1 paragraph replace "EN 292-1:1991, EN 1070:1993" with "EN ISO 12100-1:2003".
4 Modification to Clause 4
st
In the 1 paragraph, delete "in accordance with EN 1050".
Throughout Table 1, replace "EN 1050 Annex A" with "EN ISO 14121-1".
5 Modifications to Clause 5
nd
In the 2 paragraph of 5, replace "EN 292" with "EN ISO 12100-2:2003".
st
In the 1 paragraph of 5.1.1 replace "4.2 of EN 292:1991" with "5 of EN ISO 12100-2:2003".
Add the following paragraphs at the end of 5.1.1:
"Guards and protective devices shall be securely held in place in accordance with 5.4.2 an
...