SIST EN ISO 12543-2:1999/A1:2005

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass

This part of this European Standard describes performance requirements for laminated safety glass as defined in EN 12543-1.

Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Teil 2: Verbund-Sicherheitsglas

Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 2: Verre feuilleté de sécurité

L'ISO 12543-2:2004 établit les exigences de performances pour le verre feuilleté de sécurité.

Steklo v stavbah - Lepljeno steklo in lepljeno varnostno steklo - 2. del: Lepljeno varnostno steklo

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2005
• Withdrawal Date: 31-May-2006
• ICS: 81.040.20 - Glass in building
• Technical Committee: STV - Steklo, svetloba in razsvetljava v gradbeništvu
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Jun-2006
• Due Date: 01-Jun-2006
• Completion Date: 01-Jun-2006
• Directive: 89/106/EEC - Construction products
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Ref Project: EN ISO 12543-2:1998/A1:2004 - Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass

Relations

• Replaced By: SIST EN ISO 12543-2:2012 - Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011)
• Effective Date: 01-Jan-2012
• Replaced By: SIST EN ISO 12543-2:1999/A1:2005 - Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass
• Effective Date: 01-Jun-2006
• Amends: SIST EN ISO 12543-2:1999 - Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:1998)
• Effective Date: 22-Dec-2008
• Replaces: SIST EN ISO 12543-2:1999/A1:2005 - Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass
• Effective Date: 01-Jun-2006
• Amends: SIST EN ISO 12543-2:1999 - Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:1998)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12543-2:1999/A1:2005
01-marec-2005
Steklo v stavbah - Lepljeno steklo in lepljeno varnostno steklo - 2. del: Lepljeno
varnostno steklo
Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety
glass
Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Teil 2: Verbund-
Sicherheitsglas
Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 2: Verre
feuilleté de sécurité
Ta slovenski standard je istoveten z: EN ISO 12543-2:1998/A1:2004
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN ISO 12543-2:1999/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12543-2:1999/A1:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 12543-2:1999/A1:2005
EUROPEAN STANDARD
EN ISO 12543-2:1998/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2004
ICS 81.040.20
English version
Glass in building - Laminated glass and laminated safety glass -
Part 2: Laminated safety glass
Verre dans la construction - Verre feuilleté et verre feuilleté Glas im Bauwesen - Verbundglas und Verbund-
de sécurité - Partie 2: Verre feuilleté de sécurité Sicherheitsglas - Teil 2: Verbund-Sicherheitsglas
This amendment A1 modifies the European Standard EN ISO 12543-2:1998; it was approved by CEN on 4 April 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12543-2:1998/A1:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12543-2:1999/A1:2005
EN ISO 12543-2
...