oSIST prEN ISO 15608:2025
(Main)Welding - Grouping system for metallic materials (ISO/DIS 15608:2024)
Welding - Grouping system for metallic materials (ISO/DIS 15608:2024)
This document specifies a uniform system for grouping materials for welding purposes. It can also be applied for other purposes, such as heat treatment, forming and non-destructive testing.
Schweißen - Gruppeneinteilung von metallischen Werkstoffen (ISO/DIS 15608:2024)
Soudage - Système de groupement des matériaux métalliques (ISO/DIS 15608:2024)
Varjenje - Sistem razvrščanja kovinskih materialov v skupine (ISO/DIS 15608:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2025
Varjenje - Sistem razvrščanja kovinskih materialov v skupine (ISO/DIS 15608:2024)
Welding - Grouping system for metallic materials (ISO/DIS 15608:2024)
Schweißen - Gruppeneinteilung von metallischen Werkstoffen (ISO/DIS 15608:2024)
Soudage - Système de groupement des matériaux métalliques (ISO/DIS 15608:2024)
Ta slovenski standard je istoveten z: prEN ISO 15608
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 15608
ISO/TC 44/SC 10
Welding — Grouping system for
Secretariat: DIN
metallic materials
Voting begins on:
Soudage — Système de groupement des matériaux métalliques
2024-12-12
Voting terminates on:
ICS: 25.160.01
2025-03-06
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 15608:2024(en)
DRAFT
ISO/DIS 15608:2024(en)
International
Standard
ISO/DIS 15608
ISO/TC 44/SC 10
Welding — Grouping system for
Secretariat: DIN
metallic materials
Voting begins on:
Soudage — Système de groupement des matériaux métalliques
ICS: 25.160.01 Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 15608:2024(en)
ii
ISO/DIS 15608:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Grouping system for steels . 1
5 Grouping system for aluminium and aluminium alloys . 3
6 Grouping system for copper and copper alloys . 4
7 Grouping system for nickel and nickel alloys . 4
8 Grouping system for titanium and titanium alloys. 4
9 Grouping system for zirconium and zirconium alloys. 5
10 Grouping system for cast irons . 5
Bibliography . 6
iii
ISO/DIS 15608:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO's adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 10, Quality management in the field of welding.
This first edition cancels and replaces the fours edition of ISO/TR 15608:2017, which has been changed into
an International standard and contains the following changes:
a) change from Technical Report to International Standard;
b) change title.
Requests for official interpretations of any aspect of this document should be directed to the Secretariat
of ISO/TC 44/SC 10 via your national standards body. A complete listing of these bodies can be found at
www.iso.org.
iv
DRAFT International Standard ISO/DIS 15608:2024(en)
Welding — Grouping system for metallic materials
1 Scope
This document specifies a uniform system for grouping materials for welding purposes. It can also be applied
for other purposes, such as heat treatment, forming and non-destructive testing.
It covers grouping systems for the following standardized materials:
— steels;
— aluminium and its alloys;
— copper and its alloys;
— nickel and its alloys;
— titanium and its alloys;
— zirconium and its alloys;
— cast irons.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at https:// www .electropedia .org/
— ISO Online browsing platform: available at https:// www .iso .org/ obp
4 Grouping system for steels
Steels are grouped as shown in Table 1. Only those elements that are specified in material standards or
specifications should be considered. Ladle (or hea
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.