SIST EN ISO 3834-6:2024
(Main)Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 series (ISO 3834-6:2024)
Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 series (ISO 3834-6:2024)
This part of ISO 3834 gives guidelines for the implementation of requirements given in the other parts of ISO 3834, and is intended to help manufacturers and users select that part of ISO 3834 appropriate to their needs. It is expected that they will already be familiar with ISO 3834 as a whole.
Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil 6: Richtlinie zur Einführung der Normenreihe ISO 3834 (ISO 3834-6:2024)
Dieses Dokument enthält Richtlinien für das Einführen der Anforderungen, die in den anderen Teilen der ISO 3834 festgelegt sind. Es hilft den Anwendern, den geeigneten Teil von ISO 3834 auszuwählen. Es wird erwartet, dass die Anwender die Normenreihe ISO 3834 bereits kennen.
Dieses Dokument enthält keine zusätzlichen Anforderungen zu denen in ISO 3834 1 bis ISO 3834 5.
Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 6: Lignes directrices pour la mise en application de la série ISO 3834 (ISO 3834-6:2024)
Le présent document donne des lignes directrices pour la mise en application des exigences données dans les autres parties de la série ISO 3834. Il est destiné à aider les utilisateurs à choisir la partie appropriée de la série ISO 3834. Il est entendu que ces derniers sont déjà familiers avec la série ISO 3834 dans son ensemble.
Le présent document ne fournit pas d'exigences supplémentaires par rapport à celles des normes ISO 3834-1 à ISO 3834-5.
Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 6. del: Smernice za uporabo standardov serije ISO 3834 (ISO 3834-6:2024)
Ta del standarda ISO 3834 podaja smernice za izvajanje zahtev iz drugih delov standarda ISO 3834 ter je namenjen za pomoč proizvajalcem in uporabnikom pri izbiri ustreznega dela standarda ISO 3834 glede na njihove potrebe. Pričakuje se, da so proizvajalci in uporabniki že v celoti seznanjeni s standardom ISO 3834.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Nadomešča:
SIST-TP CEN ISO/TR 3834-6:2007
Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 6. del: Smernice
za uporabo standardov serije ISO 3834 (ISO 3834-6:2024)
Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on
implementing ISO 3834 series (ISO 3834-6:2024)
Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil
6: Richtlinie zur Einführung der Normenreihe ISO 3834 (ISO 3834-6:2024)
Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 6: Lignes
directrices pour la mise en application de la série ISO 3834 (ISO 3834-6:2024)
Ta slovenski standard je istoveten z: EN ISO 3834-6:2024
ICS:
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 3834-6
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 25.160.01 Supersedes CEN ISO/TR 3834-6:2007
English Version
Quality requirements for fusion welding of metallic
materials - Part 6: Guidelines on implementing ISO 3834
series (ISO 3834-6:2024)
Exigences de qualité en soudage par fusion des Qualitätsanforderungen für das Schmelzschweißen von
matériaux métalliques - Partie 6: Lignes directrices metallischen Werkstoffen - Teil 6: Richtlinie zur
pour la mise en application de la série ISO 3834 (ISO Einführung der Normenreihe ISO 3834 (ISO 3834-
3834-6:2024) 6:2024)
This European Standard was approved by CEN on 13 January 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3834-6:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 3834-6:2024) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TR 3834-6:2007.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 3834-6:2024 has been approved by CEN as EN ISO 3834-6:2024 without any
modification.
International
Standard
ISO 3834-6
First edition
Quality requirements for fusion
2024-02
welding of metallic materials —
Part 6:
Guidelines on implementing the ISO
3834 series
Exigences de qualité en soudage par fusion des matériaux
métalliques —
Partie 6: Lignes directrices pour la mise en application de la série
ISO 3834
Reference number
ISO 3834-6:2024(en) © ISO 2024
ISO 3834-6:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 3834-6:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 1
5 Using the ISO 3834 series . 1
5.1 General .1
5.2 Product standards .2
5.3 Purchasers and users .2
5.4 Quality management systems in accordance with ISO 9001 .2
5.5 Quality management systems other than ISO 9001 .2
5.6 Manufacturers .2
6 Incorporating the ISO 3834 series in product standards . 2
7 Using other documents with the ISO 3834 series . 2
8 Documentation and quality systems . 3
8.1 Documentation .3
8.2 Quality management system .3
9 Selecting the level of quality requirements . 4
10 Implementation in fabrication . 6
10.1 General guidelines for implementation .6
10.1.1 Basic principles .6
10.1.2 Implementation .6
10.1.3 Control of welding .8
10.1.4 Production procedures .8
10.2 Organization .9
11 Interpretation of particular clauses in the ISO 3834 series .10
11.1 Requirements review and technical review .10
11.2 Subcontracting .10
11.3 Welding coordination .11
11.3.1 General .11
11.3.2 Welding coordinator .11
11.3.3 Welding inspection personnel . 12
11.3.4 NDT personnel . 12
11.3.5 Correlation between ISO 14731 and ISO 3834 series quality levels . 12
11.4 Equipment . 13
11.5 Welding activities . 13
11.6 Storage of parent metal . 13
11.7 Calibration and validation . 13
11.8 Identification and traceability .14
12 Assessment and certification .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.