97.100.99 - Heaters using other sources of energy

This European Standard specifies the requirements and test methods for the construction, safety, fitness
for purpose, rational use of energy and the marking of a micro combined heat and power appliance;
(hereafter referred to as “mCHP appliance”).
This European Standard applies to mCHP appliances of types B22, B23, B32, B33, B52, B53, C1, C3, C42, C43
C52, C53, C62, C63, C82, C83 and C9 based on the classifications of CEN/TR 1749:
– that use one or more supplied gases of the three gas famil...view more

This European Standard applies for decorative fireplaces/appliances for domestic use, producing a flame using alcohol, hereafter referred to as fuel, in liquid or gelatinous fuel for decoration.
NOTE 1   The requirements are strictly applied even when used in other areas. Outside the private household and outdoor area can apply more or different rules on the use of the appliances.
This European Standard applies to free-standing, wall-mounted and built-in appliances with a maximum power output of...view more

This European Standard specifies the requirements and test methods for the construction, safety, fitness
for purpose, rational use of energy and the marking of a micro combined heat and power appliance;
(hereafter referred to as “mCHP appliance”).
This European Standard applies to mCHP appliances of types B22, B23, B32, B33, B52, B53, C1, C3, C42, C43
C52, C53, C62, C63, C82, C83 and C9 based on the classifications of CEN/TR 1749:
– that use one or more supplied gases of the three gas famil...view more

This European Standard specifies the requirements and test methods for the construction, safety, fitness for purpose, rational use of energy and the marking of a micro combined heat and power appliance; (hereafter referred to as “mCHP appliance”). This European Standard applies to mCHP appliances of types B22, B23, B32, B33, B52, B53, C1, C3, C42, C43 C52, C53, C62, C63, C82, C83 and C9 based on the classifications of CEN/TR 1749: – that use one or more supplied gases of the three gas families a...view more

ISO 9459-4:2013 specifies a method of evaluating the annual energy performance of solar water heaters using a combination of test results for component performance and a mathematical model to determine an annual load cycle task performance under specified weather and load conditions. The procedure is applicable to solar water heaters with integral backup or preheating into a conventional storage or instantaneous water heater and to integral collector storage water heaters. System operating requi...view more

ISO 9459-5:2007 specifies a method for outdoor laboratory testing of solar domestic hot-water (SDHW) systems. The method may also be applied for in-situ tests, and also for indoor tests by specifying appropriate draw-off profiles and irradiance profiles for indoor measurements. The system performance is characterized by means of whole-system tests using a 'black-box' approach, i.e. no measurements on the system components or inside the system are necessary. Detailed instructions are given on the...view more

Describes test procedures for characterizing the performance of solar domestic water heating systems operated without auxiliary boosting and for predicting annual performance in any given climatic and operating conditions.Suitable for testing all types of systems including forced circulation, thermosiphon, freon-charged collektor systems.

Establishes a uniform indoor test method for rating solar domestic water heating systems for thermal performance. Applies only to solar water heating systems designed solely to heat potable water to be supplied for domestic water usage. The test procedures described are applicable to systems of solar storage capacity of 0,6 m^3 or less.

This Technical Report provides a discussion of the parameters that have a bearing on the internal corrosion of solar water heating systems. The following topics are not dealt with: problems of compatibility between polymeric materials (plastics and rubber) and fluids; corrosion risks concerning the enclosure and the external surface of the absorber; safety and health questions.

This European Standard applies for decorative fireplaces/appliances for domestic use, producing a flame using alcohol, hereafter referred to as fuel, in liquid or gelatinous fuel for decoration.
NOTE 1   The requirements are strictly applied even when used in other areas. Outside the private household and outdoor area can apply more or different rules on the use of the appliances.
This European Standard applies to free-standing, wall-mounted and built-in appliances with a maximum power output of...view more