iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 16647:2015/prA1

(Amendment)

Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private households

Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private households

This European Standard applies for decorative fireplaces/appliances for domestic use, producing a flame using alcohol, hereafter referred to as fuel, in liquid or gelatinous fuel for decoration.
NOTE 1   The requirements are strictly applied even when used in other areas. Outside the private household and outdoor area can apply more or different rules on the use of the appliances.
This European Standard applies to free-standing, wall-mounted and built-in appliances with a maximum power output of 4,5 kW.
This European Standard applies for appliances ready for use, whose burner is of one unit or are an integral component of the appliances but not for appliances with a fuel tank separate from the appliance.
This European Standard does not apply for appliances specifically designed for heating food or keeping food warm (rechauds), as well as for appliances for use in boats, caravans, other vehicles or outdoor areas.
This European Standard does not apply for appliances with a power output higher than 4,5 kW or with a defined heating function.
NOTE 2   National regulation may restrict the power output to less than 4,5 kW.

Feuerstellen für flüssige Brennstoffe - Dekorative Geräte, die unter Verwendung eines Alkohol basierten flüssigen oder gelförmigen Brennstoffes eine Flamme erzeugen - Nutzung im privaten Haushaltbereich

Foyers pour combustibles liquides - Appareils décoratifs produisant une flamme à l'aide de combustible à base d'alcool ou de combustible gélifié - Utilisation domestique

Kamini na tekoča goriva - Dekorativne naprave, ki plamen vzdržujejo z gorivom na osnovi alkohola ali želatinastim gorivom - Uporaba v zasebnih gospodinjstvih - Dopolnilo A1

General Information

Status
Not Published
Publication Date
18-Oct-2021
Withdrawal Date
18-Apr-2022
ICS
97.100.99 - Heaters using other sources of energy
Technical Committee
CEN/TC 46 - Oil stoves
Drafting Committee
CEN/TC 46/WG 2 - Fireplaces for Ethanol/Gel
Current Stage
4098 - Decision to abandon - Enquiry
Completion Date
13-Jan-2021
Directive
2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
Mandate
M/538 - [C(2015)8011] Alcohol-powered flueless fireplaces in support of Directive 2001/95/EC
Ref Project
SIST EN 16647:2015/oprA1:2020 - Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private households

Relations

Amends
EN 16647:2015 - Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private households
Effective Date
08-Nov-2017

Buy Standard

EN 16647:2015/oprA1:2020EN 16647:2015/oprA1:2020
PreviousNext
Draft
EN 16647:2015/oprA1:2020
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16647:2015/oprA1:2020
01-april-2020
Kamini na tekoča goriva - Dekorativne naprave, ki plamen vzdržujejo z gorivom na
osnovi alkohola ali želatinastim gorivom - Uporaba v zasebnih gospodinjstvih -
Dopolnilo A1
Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based
or gelatinous fuel - Use in private households
Feuerstellen für flüssige Brennstoffe - Dekorative Geräte, die unter Verwendung eines
Alkohol basierten flüssigen oder gelförmigen Brennstoffes eine Flamme erzeugen -
Nutzung im privaten Haushaltbereich
Foyers pour combustibles liquides - Appareils décoratifs produisant une flamme à l'aide
de combustible à base d'alcool ou de combustible gélifié - Utilisation domestique
Ta slovenski standard je istoveten z: EN 16647:2015/prA1
ICS:
97.100.40 Grelniki na tekoče gorivo Liquid fuel heaters
SIST EN 16647:2015/oprA1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16647:2015/oprA1:2020

---------------------- Page: 2 ----------------------
SIST EN 16647:2015/oprA1:2020


DRAFT
EUROPEAN STANDARD
EN 16647:2015
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
March 2020
ICS
English Version

Fireplaces for liquid fuels - Decorative appliances
producing a flame using alcohol based or gelatinous fuel -
Use in private households
Foyers pour combustibles liquides - Appareils Feuerstellen für flüssige Brennstoffe - Dekorative
décoratifs produisant une flamme à l'aide de Geräte, die unter Verwendung eines Alkohol basierten
combustible à base d'alcool ou de combustible gélifié - flüssigen oder gelförmigen Brennstoffes eine Flamme
Utilisation domestique erzeugen - Nutzung im privaten Haushaltbereich
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 46.

This draft amendment A1, if approved, will modify the European Standard EN 16647:2015. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16647:2015/prA1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 16647:2015/oprA1:2020
EN 16647:2015/prA1:2020 (E)
Contents Page
European foreword . 3
1 Modification to 4.4 “Materials”. 4
2 Modification to Clause 5.8.7, “Combustion performance” . 4
3 Modification to Annex B.7 “Malfunction-related devices”. 9
4 Modification to Annex B.8 “Electric power-loss-related devices” . 10
5 Modifications in line with the Internal Regulations Part 3 throughout the text . 10

2

---------------------- Page: 4 ----------------------
SIST EN 16647:2015/oprA1:2020
EN 16647:2015/prA1:2020 (E)
European foreword
This document (EN 16647:2015/prA1:2020) has been prepared by Technical Committee CEN/TC 46
“Fireplaces for liquid fuels”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enqui
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16647:2015(Main)
Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private households
SIST EN 16647:2015

This European Standard applies for decorative fireplaces/appliances for domestic use, producing a flame using alcohol, hereafter referred to as fuel, in liquid or gelatinous fuel for decoration.
NOTE 1   The requirements are strictly applied even when used in other areas. Outside the private household and outdoor area can apply more or different rules on the use of the appliances.
This European Standard applies to free-standing, wall-mounted and built-in appliances with a maximum power output of 4,5 kW.
This European Standard applies for appliances ready for use, whose burner is of one unit or are an integral component of the appliances but not for appliances with a fuel tank separate from the appliance.
This European Standard does not apply for appliances specifically designed for heating food or keeping food warm (rechauds), as well as for appliances for use in boats, caravans, other vehicles or outdoor areas.
This European Standard does not apply for appliances with a power output higher than 4,5 kW or with a defined heating function.
NOTE 2   National regulation may restrict the power output to less than 4,5 kW.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 16647-1(Main)
Alcohol powered flueless fireplaces – Safety requirements and test methods- Part 1: Manually operated decorative fireplaces for domestic use
oSIST prEN 16647-1:2023

This document applies only to decorative fireplaces that have been manufactured for domestic use, which produce a flame using liquid alcohol, hereafter referred to as fuel.
NOTE 1:   The requirements outlined in this document be applied even outside domestic settings. In that case additional or different rules on the use of the fireplaces may apply.
This document applies to free-standing, wall-mounted and built-in fireplaces.
This document applies to decorative fireplaces that require manual user interaction for ignition, filling, re-filling or extinguishing the fireplace.
NOTE 2: The fireplaces can contain some electric or electronic components.
This document applies to fireplaces ready for use, whose fuel box is of one unit or are an integral component of the fireplaces but not for fireplaces with a fuel tank separate from the fireplace.
This document does not apply to fireplaces specifically designed for heating food or keeping food warm (rechauds), nor does it apply to fireplaces for use in boats, caravans, other vehicles or outdoor areas.
This document does not apply to fireplaces with a power output higher than 4.5 kW or with a defined heating function.
NOTE 3:   National regulation can restrict the power output to less than 4,5 kW.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16647:2015(Main)
Fireplaces for liquid fuels - Decorative appliances producing a flame using alcohol based or gelatinous fuel - Use in private households
SIST EN 16647:2015

This European Standard applies for decorative fireplaces/appliances for domestic use, producing a flame using alcohol, hereafter referred to as fuel, in liquid or gelatinous fuel for decoration.
NOTE 1   The requirements are strictly applied even when used in other areas. Outside the private household and outdoor area can apply more or different rules on the use of the appliances.
This European Standard applies to free-standing, wall-mounted and built-in appliances with a maximum power output of 4,5 kW.
This European Standard applies for appliances ready for use, whose burner is of one unit or are an integral component of the appliances but not for appliances with a fuel tank separate from the appliance.
This European Standard does not apply for appliances specifically designed for heating food or keeping food warm (rechauds), as well as for appliances for use in boats, caravans, other vehicles or outdoor areas.
This European Standard does not apply for appliances with a power output higher than 4,5 kW or with a defined heating function.
NOTE 2   National regulation may restrict the power output to less than 4,5 kW.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 16647-1(Main)
Alcohol powered flueless fireplaces – Safety requirements and test methods- Part 1: Manually operated decorative fireplaces for domestic use
oSIST prEN 16647-1:2023

This document applies only to decorative fireplaces that have been manufactured for domestic use, which produce a flame using liquid alcohol, hereafter referred to as fuel.
NOTE 1:   The requirements outlined in this document be applied even outside domestic settings. In that case additional or different rules on the use of the fireplaces may apply.
This document applies to free-standing, wall-mounted and built-in fireplaces.
This document applies to decorative fireplaces that require manual user interaction for ignition, filling, re-filling or extinguishing the fireplace.
NOTE 2: The fireplaces can contain some electric or electronic components.
This document applies to fireplaces ready for use, whose fuel box is of one unit or are an integral component of the fireplaces but not for fireplaces with a fuel tank separate from the fireplace.
This document does not apply to fireplaces specifically designed for heating food or keeping food warm (rechauds), nor does it apply to fireplaces for use in boats, caravans, other vehicles or outdoor areas.
This document does not apply to fireplaces with a power output higher than 4.5 kW or with a defined heating function.
NOTE 3:   National regulation can restrict the power output to less than 4,5 kW.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
kSIST FprEN ISO 17294-1:2023

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
kSIST FprEN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 81060-2:2019/A2:2024(Amendment)
Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type - Amendment 2 (ISO 81060-2:2018/Amd 2:2024)
SIST EN ISO 81060-2:2020/A2:2024
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16783:2024(Main)
Thermal insulation products - Environmental Product Declarations (EPD) - Product Category Rules (PCR) complementary to EN 15804 for factory made and in-situ formed products
kSIST FprEN 16783:2024

This document provides the product category rules (PCR) for Type III environmental declarations (as in EN 15804:2012+A2:20191) for factory made and in situ thermal insulation products.
Complementary to EN 15804:2012+A2:20191, the PCR described in this document:
-   specify the declared unit to be used;
-   define the system boundaries for thermal insulation products;
-   specify/describe the default scenarios and rules for defining scenarios for certain life cycle information modules.
These PCR are intended to be used for cradle to gate, cradle to gate with options or cradle to grave assessment, provided the intention is properly stated in the system boundary description.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day