iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 795:1996

(Main)

Protection against falls from a height - Anchor devices - Requirements and testing

Protection against falls from a height - Anchor devices - Requirements and testing

This standard specifies requirements, test methods and instructions for use and marking for anchorage devices designed exclusively for use with personal protective equipment against falls from a height.    This standard does not apply to hooks designed to EN 517, or walkways to EN 516, nor to fixed anchor points forming part of the original structure.

Schutz gegen Absturz - Anschlageinrichtungen - Anforderungen und Prüfverfahren

Diese Norm legt Anforderungen, Prüfverfahren, Gebrauchsanleitungen und Kennzeichnungen für  von Anschlageinrichtungen zur Benutzung in Verbindung mit persönlichen Schutzausrüstungen gegen Absturz fest. Diese Norm gilt nicht für Haken nach prEN 517.  Die Norm enthält ausserdem einem informativen Anhang mit Empfehlungen für die Montage, einschliesslich die Montage von Ankern.

Protection contre les chutes de hauteur - Dispositifs d'ancrage - Exigences et essais

La présente norme spécifie les exigences, les méthodes d'essai, le mode d'emploi et le marquage des dispositifs d'ancrage destinés à être utilisés avec des équipements de protection individuelle contre les chutes de hauteur. Elle ne s'applique pas aux crochets conçus pour le prEN 517.  La présente norme comprend également une annexe informative qui fournit des critères relatifs aux recommendations pour l'installation, y compris l'installation des ancres structurelles.

Varovanje pred padci z višine - Sidrišča - Zahteve in preskušanje

General Information

Status
Withdrawn
Publication Date
23-Jul-1996
Withdrawal Date
10-Jul-2012
ICS
13.340.99 - Other protective equipment
Technical Committee
CEN/TC 160 - Protection against falls from height including working belts
Drafting Committee
CEN/TC 160/WG 1 - General requirements
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
11-Jul-2012
Completion Date
11-Jul-2012
Directive
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/BC/CEN/88/11 - Order for standardization concerning Personal Protective Equipment (P.P.E.) - protection against falls from height
Ref Project
SIST EN 795:1996 - Protection against falls from a height - Anchor devices - Requirements and testing

Relations

Replaced By
EN 795:2012 - Personal fall protection equipment - Anchor devices
Effective Date
22-Dec-2008
Amended By
EN 795:1996/A1:2000 - Protection against falls from a height - Anchor devices - Requirements and testing
Effective Date
08-Jun-2022

Buy Standard

EN 795:1996EN 795:1996
PreviousNext
Standard
EN 795:1996
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-1996
9DURYDQMHSUHGSDGFL]YLãLQH6LGULãþD=DKWHYHLQSUHVNXãDQMH
Protection against falls from a height - Anchor devices - Requirements and testing
Schutz gegen Absturz - Anschlageinrichtungen - Anforderungen und Prüfverfahren
Protection contre les chutes de hauteur - Dispositifs d'ancrage - Exigences et essais
Ta slovenski standard je istoveten z: EN 795:1996
ICS:
13.340.60 =DãþLWDSUHGSDGFLLQ]GUVL Protection against falling and
slipping
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

SIST E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 358:2018(Main)
Personal protective equipment for work positioning and prevention of falls from a height - Belts and lanyards for work positioning or restraint
SIST EN 358:2019

This document applies to belts and lanyards intended for the purpose of work positioning or restraint. It specifies the requirements, testing, marking and information supplied by the manufacturer.
This document does not cover restraint lanyards with a fixed length which are not integrated into a belt.
NOTE   Restraint lanyards with a fixed length which are not integrated into a belt are covered in EN 354.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 795:2012(Main)
Personal fall protection equipment - Anchor devices
SIST EN 795:2012

This European Standard specifies requirements for performance and associated test methods for single-user anchor devices which are intended to be removable from the structure. These anchor devices incorporate stationary or travelling (mobile) anchor points designed for the attachment of components of a personal fall protection system in accordance with EN 363.
This European Standard also gives requirements for marking and instructions for use, and guidance on installation.
This European Standard is not applicable to:
-   anchor devices intended to allow more than one user to be attached at any one time;
-   anchor devices used in any sports or recreational activity;
-   equipment designed to conform to EN 516 or EN 517;
-   elements or parts of structures which were installed for use other than as anchor points or anchor devices, e.g. beams, girders;
-   structural anchors (see 3.3).

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 341:2011(Main)
Personal fall protection equipment - Descender devices for rescue
SIST EN 341:2011

This European Standard specifies requirements, test methods, marking and information to be supplied by the manufacturer for descender devices, which include descent lines (hereinafter referred to as lines), intended for rescue and to protect against falls in a rescue system, which is a personal fall protection system. This European Standard does not specify requirements for descender devices that are used for descending in mountaineering, rope access or work positioning systems.
NOTE   A descender device which enables the user to rescue himself and which conforms to this European Standard is personal protective equipment (PPE).

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 365:2004/AC:2006(Corrigendum)
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
SIST EN 365:2005/AC:2007

TC - Modification to 4.6

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 362:2004(Main)
Personal protective equipment against falls from a height - Connectors
SIST EN 362:2005

This European Standard specifies the requirements, test methods, marking and information supplied by the manufacturer for connectors. Connectors conforming to this European Standard are used as connecting elements in personal fall protection systems, i.e. fall arrest, work positioning, rope access, restraint and rescue systems.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 365:2004(Main)
Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging
SIST EN 365:2005

This document specifies the minimum general requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging of PPE, which includes body holding devices, and other equipment used in conjunction with a body holding device, to prevent falls, for access, egress and work positioning, to arrest falls and for rescue.
This document is not intended to cover:
1)   specific requirements that are only relevant to the particular PPE or other equipment for protection against falls from a height and its use, which should be specified in the relevant document;
2)   PPE or other equipment for protection against falls from a height used in any sports or recreational activity.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 361:2002(Main)
Personal protective equipment against falls from a height - Full body harnesses
SIST EN 361:2002

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for full body harnesses. Other types of body support, specified in other European Standards, e. g. EN 358, EN 813 or EN 1497, may be incorporated into the full body harness. Fall arrest systems are specified in prEN 363.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 355:2002(Main)
Personal protective equipment against falls from a height - Energy absorbers
SIST EN 355:2002

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for energy absorbers. Energy absorbers conforming to this European Standard are used as elements or components either integrated in a lanyard, an anchor line or a full body harness or in combination with one of them.
Combinations of an energy absorber and a lanyard are sub-systems constituting one of the fall arrest systems covered by prEN 363, when combined with a full body harness specified in EN 361.
Fall arresters are specified in EN 353-1, EN 353-2 and EN 360.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1891:1998(Main)
Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes
SIST EN 1891:1999

This European Standard applies to low stretch textile ropes of kernmantel construction from 8,5 mm to 16 mm diameter, for use by persons in rope access including all kinds of work positioning and restraint; for rescue and in speleology. Two types of low stretch kernmantel rope are defined: A and B. The European Standard specifies requirements, testing, marking and information to be supplied by the manufacturer including instructions for use of such low stretch kernmantel ropes.  NOTE 1: It is possible that rope not conforming to this European Standard may also be suitable for the activities described above.  NOTE 2: Ropes used for protection during any free climbing activity in rope access, rescue or speleology should take account of other standards, e.g. EN 892. Dynamic mountaineering rope may also be used for protection during rope access and work positioning.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1868:1997(Main)
Personal protective equipment against falls from a height - List of equivalent terms
SIST EN 1868:2002

This European Standard is applicable to personal protective equipment against falls from a height. This European Standardspecifies a list of terms used to define personal protective equipment against falls from a height. The terms are listed in the alphabetical order in the three offical languages of CEN, English, French and German. The terms or explanations given in parentheses are added exclusively for better understanding.

  • Standard
    27 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    41 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day