EN 353-1:2002

Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for guided type fall arresters including a rigid anchor line usually attached to or integrated in fixed ladders or rungs adequately adjusted to suitable structures. Guided type fall arresters including a rigid anchor line conforming to this European Standard are sub-systems constituting one of the fall arrest systems covered by prEN 363, when combined with a full body harness specified in EN 361 including a front attachment point located appropriately in relation to the fall arrester. Other types of fall arresters are specified in EN 353-2 or in EN 360. Energy absorbers are specified in EN 355.

Persönliche Schutzausrüstungen gegen Absturz - Teil 1: Steigschutzeinrichtungen einschließlich fester Führung

Diese Europäische Norm legt Anforderungen, Prüfverfahren, Kennzeichnung, Informationen des Herstellers und Verpackung für mitlaufende Auffanggeräte einschließlich fester Führung (Steigschutzeinrichtungen) fest, die gewöhnlich an Steigleitern oder Steigeisengängen angebracht oder in diese integriert sind, wobei diese in geeigneter Weise an passenden Konstruktionen befestigt sind. Mitlaufende Auffanggeräte einschließlich fester Führung (Steigschutzeinrichtungen) nach dieser Europäischen Norm sind Teilsysteme, die in Kombination mit einem Auffanggurt nach EN 361 einschließlich einer vorderen Öse, die sich in passender Lage zum Auffanggerät befindet, eines der Auffangsysteme nach EN 363 bilden. Andere Arten von Auffanggeräten sind in EN 360 und in EN 353-2 festgelegt. Falldämpfer sind in EN 355 festgelegt.

Equipement de protection individuelle contre les chutes de hauteur - Partie 1: Antichutes mobiles incluant un support d'assurage rigide

La présente Norme européenne spécifiée les exigences, les méthodes d'essai, le marquage, la notice d'information du fabricant et l'emballage des antichutes mobiles incluant un support d'assurage rigide généralement fixé ou intégré à des échelles ou à des barreaux d'ascension adéquatement fixés sur des structures appropriées. Les antichutes mobiles incluant un support d'assurage rigide conformes à la présente Norme européenne sont utilisés dans des sous-systèmes qui constituent l'un des systèmes d'arrêt des chutes couverts par le prEN 363 lorsqu'ils sont associés à un harnais d'antichute spécifié dans l'EN 361 comprenant un point d'accrochage frontal placé de manière appropriée par rapport à l'antichute. D'autres types d'antichutes sont spécifiés dans l'EN 353-2 ou dans l'EN 360. Les absorbeurs d'énergie sont spécifiés dans l'EN 355.

Osebna varovalna oprema za zaščito pred padci z višine - 1. del: Drseče naprave za zaustavljanje na togem vodilu

General Information

• Status: Withdrawn
• Publication Date: 21-May-2002
• Withdrawal Date: 30-Sep-2014
• ICS: 13.340.99 - Other protective equipment
• Technical Committee: CEN/TC 160 - Protection against falls from height including working belts
• Drafting Committee: CEN/TC 160/WG 2 - Personal fall arresting systems, components and systems
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-Oct-2014
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Directive: 93/68/EEC - Council Directive amending Dir. 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (personal protective equipment), 90/384/EEC (automatic weighing instruments), 90/385/EEC (active implantable medicinal devices), 90/396/EEC (appliances burning gaseous fuels), 91/263/EEC (telecommunications terminal equipment), 92/42/EEC and 73/23/EEC
• Directive: 93/95/EEC - Personal protective equipment (Dir. 89/686/EEC amendment)
• Directive: 96/58/EC - Personal protective equipment (Dir. 89/686/EEC amendment)
• Mandate: M/BC/CEN/88/11 - Order for standardization concerning Personal Protective Equipment (P.P.E.) - protection against falls from height
• Ref Project: SIST EN 353-1:2002 - Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line

Relations

• Replaces: EN 353-1:1992 - Personal protective equipment against falls from a height - Guided type fall arresters on a rigid anchorage line
• Effective Date: 22-Dec-2008
• Replaced By: EN 353-1:2014 - Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line
• Effective Date: 08-Oct-2014
• Revised: prEN 353-1 - Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor line
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Personal protective equipment against falls from a height - Part 1: Guided type fall arresters including a rigid anchor lineEquipement de protection individuelle contre les chutes de hauteur - Partie 1: Antichutes mobiles incluant un support d'assurage rigidePersönliche Schutzausrüstungen gegen Absturz - Teil 1: Steigschutzeinrichtungen einschließlich fester Führung13.340.99Druga varovalna opremaOther protective equipment13.340.60Protection against falling and slippingICS:SIST EN 353-1:2002enTa slovenski standard je istoveten z:EN 353-1:200201-november-2002SIST EN 353-1:2002SLOVENSKI
STANDARDSIST EN 353-1:19961DGRPHãþD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 353-1May 2002ICS 13.340.99Supersedes EN 353-1:1992English versionPersonal protective equipment against falls from a height - Part1: Guided type fall arresters including a rigid anchor lineEquipement de protection individuelle contre les chutes dehauteur - Partie 1: Antichutes mobiles incluant un supportd'assurage rigidePersönliche Schutzausrüstungen gegen Absturz -Mitlaufende Auffanggeräte einschließlich fester FührungThis European Standard was approved by CEN on 12 March 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 353-1:2002 E



EN 353-1:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Requirements.54.1Design and ergonomics.54.2Materials and construction.54.3Locking.64.3.1Locking after conditioning.64.3.2Locking after optional conditioning.64.4Static strength.64.5Dynamic performance.64.6Corrosion resistance.64.7Marking and information.65Test methods.75.1Locking test after conditioning.
...