iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D6631-05(2019)

(Guide)

Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method

Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method

SIGNIFICANCE AND USE
3.1 The purpose of an interlaboratory evaluation, as defined in this guide, is to determine the variability of results obtained in different laboratories on equivalent equipment using a prescribed test method.  
3.2 The definitions of statistical terms used in this guide are contained in Terminology E456.
SCOPE
1.1 This guide covers a simplified statistical procedure for planning and conducting interlaboratory evaluations of test methods.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

Status
Historical
Publication Date
31-May-2019
ICS
03.120.20 - Product and company certification. Conformity assessment
Technical Committee
D01 - Paint and Related Coatings, Materials, and Applications
Drafting Committee
D01.20 - Quality Assurance and Statistics
Current Stage
Ref Project

Relations

Replaces
ASTM D6631-05(2015) - Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
Effective Date
01-Jun-2019
Refers
ASTM E1345-98(2019) - Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
Effective Date
01-May-2019
Refers
ASTM E456-13A(2017)e1 - Standard Terminology Relating to Quality and Statistics
Effective Date
01-Oct-2017
Refers
ASTM E456-13A(2017)e3 - Standard Terminology Relating to Quality and Statistics
Effective Date
01-Oct-2017
Refers
ASTM E1345-98(2014) - Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
Effective Date
01-Nov-2014
Refers
ASTM E177-14 - Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
Effective Date
01-May-2014
Refers
ASTM E456-13ae3 - Standard Terminology Relating to Quality and Statistics
Effective Date
15-Nov-2013
Refers
ASTM E456-13ae1 - Standard Terminology Relating to Quality and Statistics
Effective Date
15-Nov-2013
Refers
ASTM E456-13ae2 - Standard Terminology Relating to Quality and Statistics
Effective Date
15-Nov-2013
Refers
ASTM E456-13a - Standard Terminology Relating to Quality and Statistics
Effective Date
15-Nov-2013
Refers
ASTM E456-13 - Standard Terminology Relating to Quality and Statistics
Effective Date
15-Aug-2013
Refers
ASTM E691-13 - Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
Effective Date
01-May-2013
Refers
ASTM E177-13 - Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
Effective Date
01-May-2013
Refers
ASTM E456-12 - Standard Terminology Relating to Quality and Statistics
Effective Date
01-May-2012
Refers
ASTM E456-12e1 - Standard Terminology Relating to Quality and Statistics
Effective Date
01-May-2012

Buy Standard

ASTM D6631-05(2019) - Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test MethodASTM D6631-05(2019) - Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
PreviousNext
Guide
ASTM D6631-05(2019) - Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: D6631 − 05 (Reapproved 2019)
Standard Guide for
Committee D01 for Conducting an Interlaboratory Study for
1
the Purpose of Determining the Precision of a Test Method
This standard is issued under the fixed designation D6631; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope current limits of both the software, and the statistical protocols
currently available, this effectively restricts the use of this
1.1 This guide covers a simplified statistical procedure for
guide to test methods which yield results that are continuous.
planning and conducting interlaboratory evaluations of test
This generally means a measured quantity, such as pH or
methods.
brightness. Results that are discrete (such as counts or pass-
1.2 This international standard was developed in accor-
fail), or ordered (ranked), present three special problems in the
dance with internationally recognized principles on standard-
creation of a meaningful precision statement:
ization established in the Decision on Principles for the
4.1.1 The amount of information contained in discrete and
Development of International Standards, Guides and Recom-
ordereddataismuchlessthanincontinuousdata,necessitating
mendations issued by the World Trade Organization Technical
the collection of much more data.
Barriers to Trade (TBT) Committee.
4.1.2 The sensitivity (the ability to discriminate between
similar samples) is much less in discrete and ordered data than
2. Referenced Documents
continuous data.
2
2.1 ASTM Standards:
4.1.3 Since the precision statement relies on the normal
E177 Practice for Use of the Terms Precision and Bias in
distribution, and the distributions of discrete and ordered data
ASTM Test Methods
are usually decidedly non-normal, the normal precision state-
E456 Terminology Relating to Quality and Statistics
ment is invalid.
E691 Practice for Conducting an Interlaboratory Study to
4.2 Given these concerns with discrete and ordered data, a
Determine the Precision of a Test Method
simple statement of the results obtained in these types of
E1345 Practice for Reducing the Effect of Variability of
studies might be the most useful information for a prospective
Color Measurement by Use of Multiple Measurements
user of a test method.
3. Significance and Use
5. Preliminary
3.1 The purpose of an interlaboratory evaluation, as defined
5.1 Flow chart the test method.
in this guide, is to determine the variability of results obtained
in different laboratories on equivalent equipment using a
5.2 Survey known sources of information related to the test
prescribed test method.
method to establish how results are affected by variations in
operating conditions, atmospheric conditions, differences be-
3.2 The definitions of statistical terms used in this guide are
tween operators, etc. Select what appears to be the optimum
contained in Terminology E456.
procedure.
4. Problem Formulation
5.3 Provide instructions for the test method and, without
4.1 The objective of the evaluation should be to clearly comment, observe a laboratory technician perform a test
define the expected precision of the test method. Within the according to these instructions. Revise any parts of the draft
causing difficulty.
1 5.4 If desirable, make a comparative study with other test
This guide is under the jurisdiction of ASTM Committee D01 on Paint and
Related Coatings, Materials, and Applications and is the direct responsibility of methods for measuring the property by using specimens with a
Subcommittee D01.20 on Quality Assurance and Statistics.
wide range of values of the property under test (and possibly
Current edition approved June 1, 2019. Published June 2019. Originally
with wide ranges in other properties).
approved in 2001. Last previous edition approved in 2015 as D6631 – 05 (2015).
DOI: 10.1520/D6631-05R19.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or 6. Preparation for Interlaboratory Study
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
6.1 Prepare a clear statement of the type of information
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. required from the interlaboratory evaluation.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
D6631 − 05 (2019)
6.2 Based on the s
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D3740-23(Practice)
Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction

SIGNIFICANCE AND USE
4.1 This practice provides the basic minimum criteria for use in evaluating the qualifications of a testing or inspection agency, or both, for soil and rock. The criteria may be supplemented by more specific criteria and requirements. An individual user can also use it to judge the qualification of an agency. The existence of a formal accrediting body such as a federal, state, or independent agency is not necessary for the use of this standard.
Note 1: Users of this practice should be aware that certain of these requirements may not be achievable and/or applicable to work performed outside of the United States of America (U.S.A.). In such cases, users should make sure that all necessary modifications are made to these requirements such as to render them appropriate to each specific set of circumstances.  
4.2 The intent of this practice is to provide a consensus basis for evaluating a testing or inspection agency, or both, with respect to that agency's capability to objectively and competently provide the specific services needed by the user.  
4.3 This practice may be used as a basis for accreditation.  
4.4 The users of an accredited agency must review the agency's scope of accreditation to make sure the agency has been accredited for its technical competence to perform the tasks requested by the user.
SCOPE
1.1 This practice establishes minimum qualifications for agencies engaged in the testing and inspection of soil and rock. Minimum requirements for field and laboratory personnel are defined. The practice also covers the establishment and maintenance of a quality system.  
1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on soil and rock, and for establishing essential characteristics pertaining to an agency's organization, personnel, facilities, and quality system. This practice may be supplemented by more specific criteria and requirements for particular projects.  
1.3 This practice can be used as a basis to evaluate testing and inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private, engaged in the testing and inspection of soil and rock as used in engineering design and construction.  
1.4 To qualify for accreditation to this standard, the agency must include at least five standards relating to testing methods, inspection methods, or both, from the standards covered under the jurisdictions of Committee D18, in its certificate of accreditation.  
1.5 This practice is applicable to all standards which include a reference to Practice D3740.  
1.6 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process.  
1.9 This international standard was developed in accordance with internationally recognized principles on standardizat...

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM C1093-23(Practice)
Standard Practice for Accreditation of Testing Agencies for Masonry

SIGNIFICANCE AND USE
4.1 This practice provides the basic minimum criteria for use in evaluating the qualifications of testing agencies for masonry materials. The criteria may be supplemented by more specific criteria and requirements. It can be used as a guide for internal audits by individual users.  
4.2 The intent of this practice is to provide a consensus basis for evaluating a testing agency, with respect to that agency's capability to objectively and competently provide the specific services needed by the user.  
4.3 This practice may be used as a basis for accreditation.
SCOPE
1.1 This practice covers the minimum requirements for laboratory personnel, for establishing and maintaining a quality system, and it establishes minimum qualifications for agencies engaged in the testing of masonry materials.  
1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on masonry materials, and for establishing guidelines pertaining to an agency's organization, personnel, facilities, and quality system. This practice may be supplemented by more specific criteria and requirements for particular projects.  
1.3 This practice can be used as a basis to evaluate testing agencies, and it is intended for use for the qualifying or accrediting of testing agencies, or both, public or private, engaged in the testing of masonry materials.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM E860-22(Practice)
Standard Practice for Examining and Preparing Items That Are or May Become Involved in Criminal or Civil Litigation

SIGNIFICANCE AND USE
4.1 This practice establishes procedures to be followed by the forensic science practitioner to document the nature, state, or condition of items of evidence. It also describes specific actions that are required for destructive testing if planned testing, examination, disassembly, or other actions are likely to alter the nature, state, or condition of the evidence so as to preclude or adversely limit additional examination or testing.  
4.2 Deviations from this practice are not necessarily wrong or inferior, but such deviations should be justified and documented.
SCOPE
1.1 This practice covers procedures for the examination and testing of evidence items or systems that may have been involved in a specific incident which are, or may be reasonably expected to be, the subject of civil or criminal litigation.  
1.2 This practice is applicable when it is determined that examination or testing of evidence is required, and such examination is likely to change the nature, state, or condition of the evidence.  
1.3 This practice is intended for use by competent forensic science practitioners with the requisite formal education, discipline-specific training (see Practice E2917), and demonstrated proficiency to perform forensic casework.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM F3069-14(2022)(Guide)
Standard Guide for Requirements for Bodies That Operate Certification Programs in the Field of Search and Rescue

SIGNIFICANCE AND USE
4.1 A certification body issuing certifications in the field of search and rescue is required to meet the requirements identified in this guide.  
4.2 This guide can be used by an authority having jurisdiction to determine whether to accept a certification from a certification body.  
4.3 This guide can be used by an authority having jurisdiction to validate audit a certifying body.  
4.4 This guide can be used by a certifying body to validate that its certification scheme, certification process, and certification system meet industry standards.  
4.5 Any certification body operating in accordance to ANSI-ISO-IEC 17024 or equivalent shall be considered to be in compliance with this standard.
SCOPE
1.1 This guide defines the organizational structure, policies, and procedures required to operate a certification program in the field of search and rescue.  
1.2 Certifications are used by authorities having jurisdiction as a component to their credentialing process, typically to demonstrate one component of an individual’s ability to field.  
1.3 Certifications are typically provided by third party, disinterested providers and are commonly used to validate an individual’s, team’s, or authority having jurisdiction’s training program in a particular area.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
ASTM
ASTM F3526-21(Guide)
Standard Guide for Aircraft Instrument Systems Technician Certification

SIGNIFICANCE AND USE
4.1 The guide is intended to be used to assess competencies of qualified individuals who wish to become certified as an AIS Technician through a certification program.  
4.2 The guide is intended to be used in concert with a certification provider’s structure and materials for management, exam delivery, and candidate preparation.
SCOPE
1.1 The purpose of this guide is to address the basic fundamental subject knowledge activities and functions for avionics professionals to be titled Aircraft Instrument Systems (AIS) Technician.  
1.2 This guide is the basis for the Aircraft Instrument Systems certification, an endorsement to the Aircraft Electronics Technician (AET) certification. Candidates must be a certified AET to take the certification exam associated with this guide.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
ASTM
ASTM E2936-20(Guide)
Standard Guide for Contractor Self-Assessment for U.S. Government Asset Management Systems

SIGNIFICANCE AND USE
4.1 The intent of this guide is to provide a foundation for the minimum effective internal assessment of a contractor’s government asset management system. A contractor may incorporate all or part of this guide in accordance with its established procedures and operating environment. Self-assessment should be used to identify deficiencies, related increases to risk, and to serve as a method for obtaining correction to those deficiencies, independent of, and often in advance of, a government audit, review or assessment. It should also be used to assist in determining the effective assignment of asset management resources; and to serve as a method for promoting continuous improvement in asset management practices. Self-assessments, in and of themselves may not be sufficiently independent to address external or government review, assessment, or audit requirements.  
4.2 To the extent possible, a Contractor Self-Assessment (CSA) program should provide a level of objectivity like that of an asset management system analysis performed by a government or other external auditor. Individuals who perform assessments should not be the same individuals who perform the functions being tested when enough resources are available. The contractor’s official written procedures should identify functional positions responsible for performing the self-assessment and address management controls used to maintain independence and prevent conflicts of interest whenever individuals who perform property functions also participate in CSA activities.  
4.3 The results of the CSA alone do not determine adequacy or inadequacy of the contractor’s government asset management system but should identify the level of risk presented by the contractor’s business practices. The results of the CSA should be made available to external auditors or reviewers for potential inclusion in their audits or reports in accordance with contractual requirements and the contractor’s procedures.
SCOPE
1.1 This guide is intended to be used by entities engaged in contracts with the Government of the United States of America.  
1.2 This guide applies to the current version of the FAR Government Property clause 52.245-1 dated January 2017. Entities with earlier or subsequently dated requirements/contracts should address any contractual difference when applying this guide.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    8 pages
    English language
    sale 15% off
  • Guide
    8 pages
    English language
    sale 15% off
ASTM
ASTM E3215-19a(Practice)
Standard Practice for Certification of Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers

SCOPE
1.1 This practice establishes the certification requirements for less lethal aerosol devices used by law enforcement, corrections officers, and other public safety officers.  
1.1.1 This practice is intended to be used by certification bodies and by purchasers and suppliers in the procurement of less lethal aerosol devices that meet Specification E3187/E3187M.  
1.1.2 The performance, testing, labeling, documentation, and reporting requirements for certification are specified in Specification E3187/E3187M.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM F3245-19(Guide)
Standard Guide for Aircraft Electronics Technician Personnel Certification

SIGNIFICANCE AND USE
4.1 The guide is intended to be used to assess competencies of qualified individuals who wish to become certified as an Aircraft Electronics Technician through a certification program.  
4.2 The guide is intended to be used in concert with a certification provider’s structure and materials for management, exam delivery, and candidate preparation.
SCOPE
1.1 The purpose of this guide is to address the basic fundamental subject knowledge, task performance, and task knowledge activities and functions for avionics professionals to be titled Aircraft Electronics Technicians (AETs).  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    7 pages
    English language
    sale 15% off
  • Guide
    7 pages
    English language
    sale 15% off
ASTM
ASTM D6689-01(2019)e1(Guide)
Standard Guide for Optimizing, Controlling, and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

SIGNIFICANCE AND USE
4.1 Many analytical laboratories comply with accepted quality system requirements such as NELAC, Chapter 5,5 (see Note 2) and ISO/IEC 17025. When using standard test methods, their test results on the same sample should agree with those from other similar laboratories within the reproducibility estimates (R2) published in the standard. Reproducibility estimates are generated during the standardization process as part of the interlaboratory studies (ILS). Many laboratories participate in proficiency tests to confirm that they perform consistently over time. In both ILS and proficiency testing protocols, it is generally assumed that only one workstation is used to generate the data (see 6.5.1).
Note 2: NELAC, Chapter 5, allows the use of a Work Cell where multiple instruments/operators are treated as one unit: the performance of the Work Cell is tracked rather than each workstation independently. This guide is intended to go beyond the Work Cell to achieve the benefits of monitoring workstations independently.  
4.2 Many laboratories have workloads or logistical requirements, or both, that dictate the use of multiple workstations. Some have multiple stations in the same area (central laboratory format). Others’ stations are scattered throughout a facility (at-line laboratory format). Often, analysis reports do not identify the workstation used for the testing, even if workstations differ in their testing uncertainties. Problems can arise if clients mistakenly attribute variation in report values to process rather then workstation variability. These problems can be minimized if the laboratory organization sets, complies with, and reports a unified set of measurement quality objectives throughout.  
4.3 This guide can be used to harmonize calibration and control protocols for all workstations, thereby providing the same level of measurement traceability and control. It streamlines documentation and training requirements, thereby facilitating flexibility in personnel...
SCOPE
1.1 This guide describes a protocol for optimizing, controlling, and reporting test method uncertainties from multiple workstations in the same laboratory organization. It does not apply when different test methods, dissimilar instruments, or different parts of the same laboratory organization function independently to validate or verify the accuracy of a specific analytical measurement.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    7 pages
    English language
    sale 15% off
ASTM
ASTM D7495-12(2019)(Specification)
Standard Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials

SCOPE
1.1 This document contains minimum requirements for establishing and implementing an accreditation program for agencies testing and inspecting road and paving materials.  
1.2 The criteria in this document are applicable to accreditation programs which accredit agencies testing and inspecting road and paving materials.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off