iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 710:1997/FprA1

(Amendment)

Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant associated equipment

Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant associated equipment

Sicherheit von Maschinen - Sicherheitsanforderungen an Gießereimaschinen und -anlagen der Form- und Kernherstellung und dazugehörige Einrichtungen

Sécurité des machines - Prescriptions de sécurité applicables aux machines et chantiers de moulage et de noyautage en fonderie et à leurs équipements annexes

Varnost strojev - Varnostne zahteve za livarske stroje, stroje za izdelavo jeder in pripadajočo opremo

General Information

Status
Not Published
ICS
25.120.30 - Moulding equipment
Technical Committee
CEN/TC 202 - Foundry machinery
Drafting Committee
CEN/TC 202/WG 2 - Moulding and core making
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
17-Feb-2010
Completion Date
17-Feb-2010
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
89/392/EEC - Machinery - Safety of machinery: general essential health and safety requirements
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
SIST EN 710:2000/kFprA1:2009 - Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant associated equipment

Relations

Merged Into
EN 710:1997+A1:2010 - Safety requirements for foundry moulding and coremaking machinery and plant associated equipment
Effective Date
18-Jan-2023
Amends
EN 710:1997 - Safety requirements for foundry moulding and coremaking machinery and plant associated equipment
Effective Date
22-Dec-2008

Buy Standard

EN 710:2000/kFprA1:2009EN 710:2000/kFprA1:2009
PreviousNext
Draft
EN 710:2000/kFprA1:2009
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 710:2000/kFprA1:2009
01-november-2009
9DUQRVWVWURMHY9DUQRVWQH]DKWHYH]DOLYDUVNHVWURMHVWURMH]DL]GHODYRMHGHULQ
SULSDGDMRþRRSUHPR
Safety of machinery - Safety requirements for foundry moulding and coremaking
machinery and plant associated equipment
Sicherheit von Maschinen - Sicherheitsanforderungen an Gießereimaschinen und -
anlagen der Form- und Kernherstellung und dazugehörige Einrichtungen
Sécurité des machines - Prescriptions de sécurité applicables aux machines et chantiers
de moulage et de noyautage en fonderie et à leurs équipements annexes
Ta slovenski standard je istoveten z: EN 710:1997/FprA1
ICS:
13.110 Varnost strojev Safety of machinery
25.120.30 Livarska oprema Moulding equipment
SIST EN 710:2000/kFprA1:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 710:2000/kFprA1:2009

---------------------- Page: 2 ----------------------

SIST EN 710:2000/kFprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 710:1997
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
September 2009
ICS 25.120.30

English Version
Safety of machinery - Safety requirements for foundry moulding
and coremaking machinery and plant associated equipment
Sécurité des machines - Prescriptions de sécurité Sicherheit von Maschinen - Sicherheitsanforderungen an
applicables aux machines et chantiers de moulage et de Gießereimaschinen und -anlagen der Form- und
noyautage en fonderie et à leurs équipements annexes Kernherstellung und dazugehörige Einrichtungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 202.
This draft amendment A1, if approved, will modify the European Standard EN 710:1997. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 710:1997/FprA1:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 710:2000/kFprA1:2009
EN 710:1997/FprA1:2009 (E)
Contents Page
Foreword .3
1 Modification of the title .4
2 Modification to "Contents" .4
3 Modification to "Foreword" .4
4 Modification to "Introduction" .4
5 Modification to Clause 2, "Normative references" .4
6 Modification to Clause 3, "Definitions" .6
7 Modifications to Clause 4, "Hazards" . 10
8 Modifications to Clause 5, "Safety requirements and measures" . 10
9 Modifications to 5.2 to 5.8 . 13
10 Modification to Clause 6, "Verification of the safety requirements and preventative
measures according to clause 5" .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 23062:2022(Main)
Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022)
SIST EN ISO 23062:2023

This document deals with foreseeable significant hazards, hazardous situations and events relevant to molding and coremaking machinery and associated equipment when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 5). It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during the life-cycle phases in accordance with ISO 12100:2010, 5.4, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment.
This document applies to the following equipment:
a) machinery constructed to condition and/or reclaim foundry sands for mold and coremaking (including related moldable granular materials);
b) molding machinery;
c) coremaking machinery;
d) knock-out equipment;
e) other directly associated equipment.
This document does not apply to:
—    ladles and pouring equipment;
NOTE          This equipment is covered within the European Union (EU) by EN 1247:2010.
—    wax and lost foam pattern production and wax removal equipment;
—    additive manufacturing equipment;
—    dust and/or gaseous emissions reduction equipment;
—    crane installations;
—    winches;
—    continuous conveyors or handling systems which can be an integral part of the equipment covered by this document;
—    sand and casting separation systems.
This document does not explicitly deal with electrical hazards. These hazards are covered by IEC 60204-1: 2016

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1247:2004+A1:2010(Main)
Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
SIST EN 1247:2004+A1:2010

This document specifies requirements to be met by the manufacturer for the foreseeable significant hazards due to design, construction and installation, during commissioning, operation, maintenance, and decommissioning of the following machines and equipment which are used directly and indirectly for the manufacture of castings:
-   Ladles;
-   Pouring equipment;
-   Centrifugal casting machines for production of tubes (only machines with horizontal or oblique axis of rotation);
-   Continuous and semi continuous casting machines for non-ferrous metals.
This document specifies the safety requirements in addressing the following items:
-   controls;
-   protection against:
-   mechanical hazards, movement of machines and material, ejection of parts, material, liquids and gases, implosion, structural instability;
-   electric hazards;
-   explosion, fire, scalds, contact with hot parts (burns), gases and flames;
-   noise and vibration;
-   thermal radiation;
-   harmful by-products, poisoning, pollution of operators air;
-   impact;
-   deterioration of worker’s health;
-   shearing;
-   crushing;
-   maintenance, provision for warning systems.
It is assumed that
-   normal operation of equipment falling within this scope may involve the intervention of personnel;
-   machines are operated by skilled and adequately trained persons;
-   machines are used with adequate workplace lighting conforming to local regulations, or to EN 12464-1.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 869:2006+A1:2009(Main)
Safety of machinery - Safety requirements for pressure metal diecasting units
SIST EN 869:2007+A1:2009

This European Standard specifies the safety requirements for pressure metal diecasting units.
It applies to pressure diecasting machines and to the interfaces with the following ancillary equipment:
-   die,
-   melting, holding and dosing furnaces (see EN 746-1),
-   metal feeding equipment,
-   inserting and removal devices,
-   spraying appliances,
-   heat exchanger for the die.
This ancillary equipment itself is not covered.
Additional risks arising from the material being cast are not covered.
This standard does not apply to low pressure diecasting machines and/or gravity diecasting machines.
This standard deals with all significant hazards, hazardous situations and events relevant to pressure diecasting machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during transport, commissioning, use, de-commissioning and maintenance periods, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment.
This document is not applicable to pressure metal diecasting units/machinery which are manufactured before the date of its publication as EN.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1248:2001+A1:2009(Main)
Foundry machinery - Safety requirements for abrasive blasting equipment
SIST EN 1248:2002+A1:2009

This standard specifies requirements to be met by the manufacturer of abrasive blasting equipment for the foreseeable significant hazards due to design, construction and installation, during commissioning, operation, maintenance and decommissioning of the equipment which employ either centrifugal force or compressed air as a means of accelerating abrasive to achieve the desired result.
Abrasive blasting equipment covers:
-   centrifugal blasting machines;
-   air blasting machines;
-   loading, conveying and unloading systems for the workpieces.
See Annex A for more details.
This standard covers all foreseeable significant hazards which could be encountered during the lifetime of the machine as listed in clause 5.
This standard does not apply to:
-   mobile centrifugal blasting equipment;
-   mobile air blasting equipment;
-   wet blasting equipment;
-   the general works compressed air supply system.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1265:1999+A1:2008(Main)
Safety of machinery - Noise test code for foundry machines and equipment
SIST EN 1265:2000+A1:2009

This noise test code specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the noise emission values of several groups of foundry machinery. It specifies noise measurement methods that are available and operating and mounting conditions that shall be used for the test.
Noise emission values include emission sound pressure levels at work stations and the sound power level. The determination of these quantities is necessary for:
-   manufacturers to declare the noise emitted;
-   comparing the noise emitted by machines in the group concerned;
-   purposes of noise control at the source at the design stage.
The use of this standard ensures the reproducibility of the determination of the !noise emission values" within specified limits determined by the grade of accuracy of the basic noise measurement method used. Noise measurement methods allowed by this standard are engineering methods (grade 2) and survey methods (grade 3).
This standard has a main body giving general requirements common to the foundry machines family. Six normative Annexes give requirements specific to the groups of foundry machinery listed below:
-   core making machines (EN 710);
-   moulding machines (EN 710);
-   knock-out grids and knock-out trays (EN 710);
-   dry abrasive blasting equipment (not restricted to foundry application) (EN 1248);
-   air blasting equipment (EN 1248);
-   diecasting machines (EN 869);
and six informative Annexes giving guidance for the definition of specific operating conditions.
The main body of this standard also gives guidance for the measurement of the noise emission of foundry machines not dealt with in the Annexes.
This standard does not cover the computation of personnel daily noise exposure.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1247:2004/FprA1(Amendment)
Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines
SIST EN 1247:2004/kFprA1:2010
  • Amendment
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 869:2006/prA1(Amendment)
Foundry machinery - Safety requirements for pressure metal diecasting units
SIST EN 869:2007/kprA1:2008
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1248:2001/prA1(Amendment)
Foundry machinery - Safety requirements for abrasive blasting equipment
SIST EN 1248:2002/kprA1:2008
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23062:2022(Main)
Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022)
SIST EN ISO 23062:2023

This document deals with foreseeable significant hazards, hazardous situations and events relevant to molding and coremaking machinery and associated equipment when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 5). It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during the life-cycle phases in accordance with ISO 12100:2010, 5.4, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment.
This document applies to the following equipment:
a) machinery constructed to condition and/or reclaim foundry sands for mold and coremaking (including related moldable granular materials);
b) molding machinery;
c) coremaking machinery;
d) knock-out equipment;
e) other directly associated equipment.
This document does not apply to:
—    ladles and pouring equipment;
NOTE          This equipment is covered within the European Union (EU) by EN 1247:2010.
—    wax and lost foam pattern production and wax removal equipment;
—    additive manufacturing equipment;
—    dust and/or gaseous emissions reduction equipment;
—    crane installations;
—    winches;
—    continuous conveyors or handling systems which can be an integral part of the equipment covered by this document;
—    sand and casting separation systems.
This document does not explicitly deal with electrical hazards. These hazards are covered by IEC 60204-1: 2016

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1369:2012(Main)
Founding - Magnetic particle testing
SIST EN 1369:2013

This European Standard specifies a magnetic particle testing method for ferro-magnetic iron and steel castings.
NOTE   An iron or steel casting is considered to be ferro-magnetic if the magnetic induction is greater than 1 T (Tesla) for a magnetic field strength of 2,4 kA/m.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day