EN ISO 17225-1:2014
(Main)Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO 17225-1:2014)
Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO 17225-1:2014)
ISO 17225-1:2014 determines the fuel quality classes and specifications for solid biofuels of raw and processed materials originating from a) forestry and arboriculture; b) agriculture and horticulture; and c) aquaculture.
Chemically treated material may not include halogenated organic compounds or heavy metals at levels higher than those in typical virgin material values or higher than typical values of the country of origin.
Biogene Festbrennstoffe - Brennstoffspezifikationen und -klassen - Teil 1: Allgemeine Anforderungen (ISO 17225-1:2014)
Dieser Teil von ISO 17225 legt die qualitätsbezogenen Brennstoffklassen und Spezifikationen für biogene Festbrennstoffe aus Rohmaterial und verarbeitetem Material fest, die aus folgenden Quellen stammen:
a) Forstwirtschaft und Baumkultur;
b) Landwirtschaft und Gartenbau;
c) Aquakultur.
Chemisch behandeltes Material darf halogen-organische Verbindungen oder Schwermetalle nicht in Konzentrationen enthalten, die über denen der typischen Werte für naturbelassenes Material (siehe Anhang B) oder der typischen Werte für das Herkunftsland liegen.
ANMERKUNG Roh und verarbeitetes Material umfasst holzartige Biomasse, halmgutartige Biomasse, Biomasse von Früchten, aquatische Biomasse und biologisch abbaubaren Abfall aus den vorstehend genannten Bereichen.
Biocombustibles solides - Classes et spécifications des combustibles - Partie 1: Exigences générales (ISO 17225-1:2014)
L'ISO 17225-1:2014 détermine les classes de qualité et les spécifications des biocombustibles solides de matières premières et de matières transformées provenant de:
a) la sylviculture et l'arboriculture;
b) l'agriculture et l'horticulture;
c) l'aquaculture.
Les niveaux de composés organiques halogénés ou de métaux lourds inclus dans les matériaux traités chimiquement ne doivent pas dépasser les valeurs des matériaux vierges ou les valeurs types du pays d'origine.
Trdna biogoriva - Specifikacije goriv in razredi - 1. del: Splošne zahteve (ISO 17225-1:2014)
Standard EN ISO 17225-1 določa razrede kakovosti goriva in specifikacije za trdna biogoriva iz surovih in obdelanih materialov, ki izvirajo iz a) gozdarstva in gojenja dreves, b) kmetijstva in vrtnarstva, c) gojenja vodnih organizmov. Kemično obdelan material ne sme vsebovati večje količine halogeniranih organskih spojin ali težkih kovin, kot jih vsebujejo običajni primarni materiali (glejte Dodatek B) ali količine, večje od običajne v državi izvora.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17225-1:2014
01-julij-2014
1DGRPHãþD
SIST EN 14961-1:2010
Trdna biogoriva - Specifikacije goriv in razredi - 1. del: Splošne zahteve (ISO 17225
-1:2014)
Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO
17225-1:2014)
Feste Biobrennstoffe - Brennstoffspezifikationen und -klassen - Teil 1: Allgemeine
Anforderungen (ISO 17225-1:2014)
Biocombustibles solides - Classes et spécifications des combustibles - Partie 1:
Exigences générales (ISO 17225-1:2014)
Ta slovenski standard je istoveten z: EN ISO 17225-1:2014
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.160.10 Trda goriva Solid fuels
SIST EN ISO 17225-1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17225-1:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 17225-1:2014
EUROPEAN STANDARD
EN ISO 17225-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2014
ICS 27.190; 75.160.10 Supersedes EN 14961-1:2010
English Version
Solid biofuels - Fuel specifications and classes - Part 1: General
requirements (ISO 17225-1:2014)
Biocombustibles solides - Classes et spécifications des Feste Biobrennstoffe - Brennstoffspezifikationen und -
combustibles - Partie 1: Exigences générales (ISO 17225- klassen - Teil 1: Allgemeine Anforderungen (ISO 17225-
1:2014) 1:2014)
This European Standard was approved by CEN on 3 April 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17225-1:2014 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17225-1:2014
EN ISO 17225-1:2014 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17225-1:2014
EN ISO 17225-1:2014 (E)
Foreword
This document (EN ISO 17225-1:2014) has been prepared by Technical Committee ISO/TC 238 “Solid
biofuels” in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of which is
held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawn
at the latest by November 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14961-1:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17225-1:2014 has been approved by CEN as EN ISO 17225-1:2014 without any modification.
3
-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.