EN 508-1:2008

Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel

This Part of EN 508 specifies requirements for self-supporting roofing products for discontinuous laying made from metallic coated steel sheet with or without additional organic coatings.
The standard establishes general characteristics, definitions, classifications and labelling for the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply when purchased before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions.
The standard applies to all discontinuously laid self-supporting external profiled sheets for roofing with the exception of tiles with a surface area less than 1 m2 and produced by stamping. These profiled roof sheets are designed to keep wind, rain and snow out of the building and to transfer any resultant loads and infrequent maintenance loads to the structure.
No requirements for supporting construction, design of roof system and execution of connections and flashings are included.

Dachdeckungsprodukte aus Metallblech - Festlegungen für selbsttragende Bedachungselemente aus Stahlblech, Aluminiumblech oder nichtrostendem Stahlblech - Teil 1: Stahl

Dieser Teil von EN 508 legt Anforderungen an selbsttragende Dacheindeckungsprodukte zur überlappenden Verlegung fest, die aus Stahlblech mit metallischem Überzug, mit oder ohne zusätzliche organische Beschichtung, gefertigt wurden.
Die Norm legt die allgemeinen Merkmale, Definitionen, Klassifizierungen und die Beschriftung für die Produkte fest, sowie die Anforderungen an die Werkstoffe, aus denen die Produkte hergestellt werden können. Sie ist dafür bestimmt, entweder vom Hersteller verwendet zu werden, um sicherzustellen, dass seine Produkte den Anforderungen entsprechen, oder vom Käufer, um zu überprüfen, ob die Produkte den Anforderungen entsprechen, bevor sie das Werk verlassen. Die Norm legt die Anforderungen an Produkte fest, unter denen die Produkte allen normalen Einsatzbedingungen gerecht werden können.
Die Norm gilt für alle außen verwendeten, überlappend verlegten, selbsttragenden Profilbleche, sie gilt nicht für Dachpfannen mit einer Oberfläche < 1 m2 und gepresste Dachpfannen. Diese Profilbleche zur Dacheindeckung sind so ausgelegt, dass sie das Eindringen von Wind, Regen und Schnee in das Gebäude verhindern und dass alle daraus und alle aus nicht ständig durchgeführten Instandhaltungsarbeiten resultierenden Lasten auf das Bauwerk übertragen werden.
Anforderungen an die Unterkonstruktion, die Konstruktion des Dachsystems und an die Ausführung der Verbindungen und an Kehlbleche sind nicht Gegenstand dieser Norm.

Produits de couverture en tôle métallique - Spécification pour les plaques de couverture en tôles d'acier, d'aluminium ou d'acier inoxydable - Partie 1 : Acier

Cette partie de l'EN 508 spécifie les prescriptions relatives aux plaques de couverture pour pose en discontinu en tôles d'acier revêtues avec ou sans revêtement organique supplémentaire.
La norme donne les caractéristiques générales, les définitions, les classifications et l'étiquetage applicables aux produits, de même que les prescriptions relatives aux matériaux à partir desquels les produits peuvent être fabriqués. Elle est destinée à être utilisée soit par des fabricants en vue de démontrer que leurs produits sont conformes aux prescriptions, soit par des acheteurs pour vérifier que les produits sont conformes avant leur expédition de l’usine. Elle spécifie les prescriptions relatives aux produits pour leur permettre de répondre à toutes les conditions normales en service.
La norme s'applique à toutes les plaques profilées extérieures de couverture posées en discontinu à l’exception des tuiles de surface inférieure à 1 m² et produites par estampage. Ces plaques profilées sont conçues pour empêcher le vent, la pluie et la neige de pénétrer dans le bâtiment et pour transmettre à la structure porteuse les charges qui en résultent ainsi que les charges non permanentes dues aux opérations d'entretien.
Aucune prescription relative à la structure porteuse, à la conception du système de toiture et à la réalisation des assemblages et des finitions n'est incluse

Pločevina za pokrivanje streh - Specifikacije za samonosilne proizvode iz jeklene, aluminijeve pločevine ali pločevine iz nerjavnega jekla - 1. del: Jeklo

General Information

• Status: Withdrawn
• Publication Date: 08-Jul-2008
• Withdrawal Date: 27-May-2014
• ICS: 91.060.20 - Roofs
• Technical Committee: CEN/TC 128 - Roof covering products for discontinuous laying and products for wall cladding
• Drafting Committee: CEN/TC 128/SC 7 - Roofing products from metal sheet
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 28-May-2014
• Completion Date: 28-May-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 508-1:2008 - Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel

Relations

• Replaces: EN 508-1:2000 - Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
• Effective Date: 22-Dec-2008
• Replaced By: EN 508-1:2014 - Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dachdeckungsprodukte aus Metallblech - Festlegungen für selbsttragende Bedachungselemente aus Stahlblech, Aluminiumblech oder nichtrostendem Stahlblech - Teil 1: StahlProduits de couverture en tôle métallique - Spécification pour les plaques de couverture en tôle d'acier, d'aluminium ou d'acier inoxydable - Partie 1 : AcierRoofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel91.060.20StreheRoofs77.140.50SROL]GHONLFlat steel products and semi-productsICS:Ta slovenski standard je istoveten z:EN 508-1:2008SIST EN 508-1:2008en,fr,de01-november-2008SIST EN 508-1:2008SLOVENSKI
STANDARDSIST EN 508-1:20021DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 508-1July 2008ICS 91.060.20Supersedes EN 508-1:2000
English VersionRoofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet -Part 1: SteelProduits de couverture en tôle métallique - Spécificationpour les plaques de couverture en tôles d'acier,d'aluminium ou d'acier inoxydable - Partie 1 : AcierDachdeckungsprodukte aus Metallblech - Festlegungen fürselbsttragende Bedachungselemente aus Stahlblech,Aluminiumblech oder nichtrostendem Stahlblech - Teil 1:StahlThis European Standard was approved by CEN on 30 May 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 508-1:2008: ESIST EN 508-1:2008

Aluminium coated steel sheet (type A).20 A.1 General.20 A.2 Specification for roof covering products.20 A.2.1 Steel grades.20 A.2.2 Coating mass.20 A.2.3 Dimensional tolerances.21 Annex B (normative)
Multilayer coated steel sheet.22 B.1 General.22 B.2 Substrate material.22 B.3 Specific requirements.22 B.3.1 Minimum nominal values of thickness.22 B.3.2 Bituminous coating specification.22 B.3.3 Durability.23 B.4 Freedom from defects.23 Annex C (informative)
Metallic coatings.24 SIST EN 508-1:2008

Dimensional tolerances.27 D.1 Tolerances for trapezoidal sheets.27 D.1.1 General.27 D.1.2 Depth of profile.27 D.1.3 Depth of stiffeners.28 D.1.4 Pitch.28 D.1.5 Widths of crown and valley.29 D.1.6 Cover width.29 D.1.7 Radius of bends.30 D.1.8 Deviation from straightness.31 D.1.9 Deviation from squareness.31 D.1.10 Length.32 D.1.11 Deviation of side lap.33 D.1.12 Curve radius and angles.33 D.2 Tolerances for sinusoidal profiles.34 D.3 Tolerances on tiles.34 D.3.1 General.34 D.3.2 Depth of tile.35 D.3.3 Web angular displacement (Figure D.12).36 D.3.4 Pitch.36 D.3.5 Width of crown and valley (Figure D.14).36 D.3.6 Cover width.37 D.3.7 Radius of bends.37 D.3.8 Deviation from straightness.38 D.3.9 Deviation from squareness.39 D.3.10 Length.39 D.3.11 Contraction or bulging.39 D.4 Methods for measuring profiles.40 D.4.1 General.40 D.4.2 Depth of profile.40 D.4.3 Depth of stiffeners.41 D.4.4 Pitch.41 D.4.5 Width of crown and valley.42 D.4.6 Cover width.42 D.4.7 Radius of bends.
...