EN 13491:2004/A1:2006

Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures

2006-08-03:ADC:DOW=DAV+21 months

Geosynthetische Dichtungsbahnen - Eigenschaften, die für die Anwendung beim Bau von Tunneln und Tiefbauwerken erforderlich sind

Géomembranes, géosynthétiques bentonitiques - Caractéristiques requises pour l'utilisation comme barrière contre les liquides dans la construction des tunnels et des structures souterraines

Geosintetične zapore - Zahtevane lastnosti pri uporabi za zaščito pred tekočinami pri gradnji predorov in pri podzemnih gradnjah

General Information

• Status: Withdrawn
• Publication Date: 08-Aug-2006
• Withdrawal Date: 16-Jul-2013
• ICS: 59.080.70 - Geotextiles
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 189 - Geotextiles and geotextile-related products
• Drafting Committee: CEN/TC 189/WG 6 - Geomembranes and geosynthetic clay liners - General and specific requirements
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 17-Jul-2013
• Completion Date: 17-Jul-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/107 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on geotextiles
• Ref Project: SIST EN 13491:2005/A1:2007 - Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures

Relations

• Replaced By: EN 13491:2013 - Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures
• Effective Date: 24-Jul-2013
• Amends: EN 13491:2004 - Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2007
*HRVLQWHWLþQH]DSRUH=DKWHYDQHODVWQRVWLSULXSRUDEL]D]DãþLWRSUHGWHNRþLQDPL
SULJUDGQMLSUHGRURYLQSULSRG]HPQLKJUDGQMDK
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the
construction of tunnels and underground structures
Geosynthetische Dichtungsbahnen - Eigenschaften, die für die Anwendung beim Bau
von Tunneln und Tiefbauwerken erforderlich sind
Géomembranes, géosynthétiques bentonitiques - Caractéristiques requises pour
l'utilisation comme barriere contre les liquides dans la construction des tunnels et des
structures souterraines
Ta slovenski standard je istoveten z: EN 13491:2004/A1:2006
ICS:
59.080.70 Geotekstilije Geotextiles
93.060 Gradnja predorov Tunnel construction
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 13491:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2006
ICS 59.080.70; 91.100.50
English Version
Geosynthetic barriers - Characteristics required for use as a fluid
barrier in the construction of tunnels and underground structures
Géomembranes, géosynthétiques bentonitiques - Geosynthetische Dichtungsbahnen - Eigenschaften, die für
Caractéristiques requises pour l'utilisation comme barrière die Anwendung beim Bau von Tunneln und Tiefbauwerken
contre les liquides dans la construction des tunnels et des erforderlich sind
structures souterraines
This amendment A1 modifies the European Standard EN 13491:2004; it was approved by CEN on 12 July 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13491:2004/A1:2006: E
worldwide for CEN national Members.

Foreword
This document (EN 13491:2004/A1:2006) has been prepared by Technical Committee CEN/TC 189
“Geosynthetics”, the secretariat of which is held by IBN.
This Amendment to the European Standard EN 13491:2004 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by February 2007,
and conflicting national standards shall be withdrawn at the latest by February 2007.
This document has been prepared under a mandate given to CEN by the European Commission and
the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.

List of amendments
Clause Par, sentence, Current text Proposed modification
table
2  - Add “ISO 527-4, Plastics - Determination of tensile properties - Part 4: Test
conditions for isotropic and orthotropic fibre-reinforced plastic composites”
- Date ISO 527-1, “ISO 527-1:1993”
- Date EN 13493, “EN 13493:2005”
Add a row #5: content: see below
4.3 Table 1, after
...