EN ISO 11403-1:2003

Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2001)

Kunststoffe - Ermittlung und Darstellung von vergleichbaren Vielpunktkennwerten - Teil 1: Mechanische Eigenschaften (ISO 11403-1:2001)

Dieser Teil der ISO 11403 legt Prüfverfahren für die Ermittlung und Darstellung von Vielpunkt-Kennwerten für folgende mechanische Eigenschaften von Kunststoffen fest:
   Dynamischer Modul
   Zugeigenschaften bei konstanter Prüfgeschwindigkeit
   Grenzspannung und -dehnung
   Spannungs-Dehnungs-Diagramme
   Kriechverhalten unter Zugbeanspruchung
   Charpy-Schlagzähigkeit
   Durchstoßverhalten
Die Prüfverfahren und Prüfbedingungen treffen vorwiegend auf solche Kunststoffe zu, die durch Spritzgießen oder Formpressen oder als Platten mit vorgegebener Dicke hergestellt werden, aus denen sich Probekörper der erforderlichen Größe fertigen lassen.

Plastiques - Acquisition et présentation de données multiples comparables - Partie 1: Propriétés mécaniques (ISO 11403-1:2001)

Polimerni materiali - Predstavitev primerljivih podatkov, pridobljenih v različnih razmerah - 1. del: Mehanske lastnosti (ISO 11403-1:2001)

General Information

• Status: Withdrawn
• Publication Date: 04-Mar-2003
• Withdrawal Date: 17-Jun-2014
• ICS: 83.080 - Plastics
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 18-Jun-2014
• Ref Project: SIST EN ISO 11403-1:2003 - Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2001)

Relations

• Replaces: EN ISO 11403-1:1999 - Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:1994)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 11403-1:2014 - Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
• Effective Date: 05-Nov-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11403-1:2003
01-julij-2003
1DGRPHãþD
SIST EN ISO 11403-1:2000
3ROLPHUQLPDWHULDOL3UHGVWDYLWHYSULPHUOMLYLKSRGDWNRYSULGREOMHQLKYUD]OLþQLK
UD]PHUDKGHO0HKDQVNHODVWQRVWL,62
Plastics - Acquisition and presentation of comparable multipoint data - Part 1:
Mechanical properties (ISO 11403-1:2001)
Kunststoffe - Ermittlung und Darstellung von vergleichbaren Vielpunktkennwerten - Teil
1: Mechanische Eigenschaften (ISO 11403-1:2001)
Plastiques - Acquisition et présentation de données multiples comparables - Partie 1:
Propriétés mécaniques (ISO 11403-1:2001)
Ta slovenski standard je istoveten z: EN ISO 11403-1:2003
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 11403-1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11403-1:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 11403-1:2003
EUROPEAN STANDARD
EN ISO 11403-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2003
ICS 83.080.01 Supersedes EN ISO 11403-1:2003
English version
Plastics - Acquisition and presentation of comparable multipoint
data - Part 1: Mechanical properties (ISO 11403-1:2001)
Plastiques - Acquisition et présentation de données Kunststoffe - Ermittlung und Darstellung vergleichbarer
multiples comparables - Partie 1: Propriétés mécaniques Vielpunktkennwerte - Teil 1: Mechanische Eigenschaften
(ISO 11403-1:2001) (ISO 11403-1:2001)
This European Standard was approved by CEN on 12 December 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11403-1:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11403-1:2003
EN ISO 11403-1:2003 (E)
Foreword
The text of ISO 11403-1:2001 has been prepared by Technical Committee ISO/TC 61 "Plastics”
of the International Organization for Standardization (ISO) and has been taken over as EN ISO
11403-1:2003 by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held
by IBN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2003, and conflicting national
standards shall be withdrawn at the latest by September 2003.
This document supersedes EN ISO 11403-1:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden,
Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11403-1:2001 has been approved by CEN as EN ISO 11403-1:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 11403-1:2003
EN ISO 11403-1:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the rele
...