EN 13071-1:2008

Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements

This European Standard specifies requirements of stationary containers, top lifted and bottom emptied, used for collection of solid non-hazardous wastes, with capacity up to 5 000 l.
This European Standard specifies the general characteristics of such containers and their accessories, the test methods and the safety requirements.

Stationäre Abfallsammelbehälter bis 5 000 l, mit Behälteraufnahme an der Oberseite und Bodenentleerung - Teil 1: Allgemeine Anforderungen

Diese Europäische Norm legt Anforderungen an stationäre Abfallsammelbehälter mit einem Volumen bis 5 000 l, mit Behälteraufnahme an der Oberseite und Bodenentleerung, für die Sammlung von festem, nicht gefährlichem Abfall fest.
Diese Europäische Norm legt die allgemeinen Eigenschaften solcher Behälter und deren Zubehör, Prüfverfahren und Sicherheitsanforderungen fest.

Conteneurs fixes à déchets de capacité inférieure ou égale à 5 000 l, levés par le haut et vidés par le bas - Partie 1 : Exigences générales

La présente Norme européenne spécifie les exigences qui s’appliquent aux conteneurs fixes, levés par le haut et vidés par le bas, utilisés pour la collecte de déchets solides non dangereux, d’une capacité maximale de 5000 l.
Elle spécifie les caractéristiques générales de ce type de conteneurs et de leurs accessoires, ainsi que les méthodes d’essai et les exigences de sécurité qui leur sont applicables.

Nepremični zabojniki za odpadke do 5000 l, ki se dvigujejo zgoraj in praznijo spodaj - 1. del: Splošne zahteve

Ta dokument opredeljuje zahteve za zabojnike, ki se dvigujejo zgoraj in praznijo spodaj in se uporabljajo za zbiranje trdnih nenevarnih odpadkov, s kapaciteto do 5.000 l. Dokument določa splošne značilnosti takšnih zabojnikov in njihove dodatke, metode preskušanja in varnostne zahteve. Sklic na drugi del za dodatne zahteve za podzemne ali delno podzemne.

General Information

• Status: Withdrawn
• Publication Date: 24-Jun-2008
• Withdrawal Date: 09-Jul-2019
• ICS: 13.030.40 - Installations and equipment for waste disposal and treatment
• Technical Committee: CEN/TC 183 - Waste management
• Drafting Committee: CEN/TC 183/WG 1 - Waste containers
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 10-Jul-2019
• Ref Project: SIST EN 13071-1:2008 - Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements

Relations

• Replaces: EN 13071:2002 - Selective waste collection containers - Above-ground mechanically-lifted containers with capacities from 80 l to 5000 l for selective collection of waste
• Effective Date: 22-Dec-2008
• Replaced By: EN 13071-1:2019 - Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements
• Effective Date: 17-Jul-2019
• Corrected By: EN 13071-1:2008/AC:2010 - Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General requirements
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13071-1:2008
01-september-2008
1DGRPHãþD
SIST EN 13071:2004
1HSUHPLþQL]DERMQLNL]DRGSDGNHGRONLVHGYLJXMHMR]JRUDMLQSUD]QLMR
VSRGDMGHO6SORãQH]DKWHYH
Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1: General
requirements
Stationäre Abfallsammelbehälter bis 5 000 l, mit Behälteraufnahme an der Oberseite und
Bodenentleerung - Teil 1: Allgemeine Anforderungen
Conteneurs fixes de capacité 5 000 l, levés par le haut et vidés par le bas Partie 1:
Spécifications générales
Ta slovenski standard je istoveten z: EN 13071-1:2008
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
SIST EN 13071-1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13071-1:2008

---------------------- Page: 2 ----------------------

SIST EN 13071-1:2008
EUROPEAN STANDARD
EN 13071-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2008
ICS 13.030.40 Supersedes EN 13071:2002
English Version
Stationary waste containers up to 5 000 l, top lifted and bottom
emptied - Part 1: General requirements
Conteneurs fixes de capacité 5 000 l, levés par le haut et Stationäre Abfallsammelbehälter bis 5 000 l, mit
vidés par le bas - Partie 1: Spécifications générales Behälteraufnahme an der Oberseite und Bodenentleerung -
Teil 1: Allgemeine Anforderungen
This European Standard was approved by CEN on 18 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13071-1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13071-1:2008
EN 13071-1:2008 (E)
Contents
Page
Foreword.4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 General requirements.6
4.1 Design .6
4.2 Filling aperture height .7
4.3 Total height.7
4.4 External surfaces/edges .7
4.5 Lifting connection position.7
4.6 Total permissible mass .7
4.7 Total usable volume .7
4.8 Waste spillage.
...